水热法生长方式对ZnO纳米棒阵列结构和性能的影响

本文系统地比较了三种方式制备的ZnO纳米棒阵列的结构和性能的异同.根据水热法生长液中碱来源的不同,ZnO纳米棒阵列的生长方式分为三种:N方式(氨水)、H方式(六次甲基四胺)和NH方式(两次N方式和一次H方式).通过扫描电子显微镜,对这三种方式生长的ZnO纳米棒阵列形貌进行了表征.此外,利用X射线衍射仪、透射电子显微镜和激光拉曼光谱对ZnO的结晶性能进行比较.结果表明,ZnO纳米棒阵列的取向性N≈NH>H,ZnO的晶体质量H>NH>N.NH方式综合N方式和H方式的优势,得到了取向性和晶体质量优良的ZnO纳米棒阵列.这将为在进一步应用中有效地选择ZnO纳米棒阵列的制备方式提供重要信息.     

离子液体中ZnO纳米棒的制备与表征

离子液体中ZnO纳米棒的制备与表征;离子液体;ZnO纳米棒;热分解     

Se和Se@C纳米棒的选择合成

通过调节葡萄糖浓度,采用十六烷基三甲基溴化铵(CTAB)辅助水热法选择合成了Se和Se@C纳米棒,并用扫描电镜(SEM)、透射电镜(TEM)、粉末X射线衍射(XRD)和X射线能谱分析(EDS)对产物进行了表征。结果表明,产物Se纳米棒直径200～300 nm,长达数微米;Se@C纳米棒长达数微米,内核直径200～00 nm,壳厚约30 nm。初步探讨了Se和Se@C纳米棒的生长机制。     

微波法制备金属钴纳米晶棒及其表征

微波法制备金属钴纳米晶棒及其表征;微波法;钴;纳米晶棒;表面活性剂;表面修饰     

水热纳米浇筑HNTs模板法制备碳纳米棒

以埃洛石纳米管（HNTs）为模板和聚乙烯醇（PVA）为碳源,采用水热纳米浇筑法成功制备出碳纳米棒。方法涉及3步,即在HNTs中浇筑PVA,碳化和模板移除。采用一系列表征手段如XRD、FT-IR、SEM、TEM、Raman、XPS、SAED和N₂吸附-脱附等表征碳纳米棒的形成和结构。具有一维棒状结构的碳纳米棒具有高的比表面积（409 m²·g^-1）和典型的介孔特征。     

水热纳米浇筑HNTs模板法制备碳纳米棒

以埃洛石纳米管（HNTs）为模板和聚乙烯醇（PVA）为碳源,采用水热纳米浇筑法成功制备出碳纳米棒。方法涉及3步,即在HNTs中浇筑PVA,碳化和模板移除。采用一系列表征手段如XRD、FT-IR、SEM、TEM、Raman、XPS、SAED和N₂吸附-脱附等表征碳纳米棒的形成和结构。具有一维棒状结构的碳纳米棒具有高的比表面积（408 m²·g^-1）和典型的介孔特征。     

ZnO模板法合成的MnO2纳米棒及其电容特性研究

以自制的 ZnO 纳米棒为模板合成了 MnO2 纳米棒.x-射线衍射、红外光谱和透射电镜等对产物成分、晶型结构及其形貌的分析结果表明,所得样品均为平均直径20nm左右、平均长度约180nm的α-MnO2 纳米棒.循环伏安和恒流充放电测试分析所得样品超级电容特性的结果表明,在 1mol/L Na2SO4 水溶液中,2mA...     

四方柱γ-MnOOH纳米棒的合成和表征

采用水热法,以十六烷基三甲基溴化铵(CTAB)为表面活性剂,在160 ℃的条件下,用乙醇还原KMnO₄合成了四方柱γ-MnOOH纳米棒。粉末XRD衍射表明合成的材料为单斜的γ-MnOOH晶体结构,扫描电镜观察到四方柱纳米棒的直径为几十纳米,长度几微米;纳米棒的形貌随CTAB用量增加趋于均一。催化活性测试表明γ-MnOOH纳米棒在120 ℃的低温下可以将甲醛完全氧化为CO₂和H₂O。     

ZnO纳米棒阵列在TiO2介孔薄膜上的生长及其表征

通过低温水热法成功地将ZnO纳米棒阵列定向生长在了介孔锐钛矿TiO2纳米晶薄膜上,并主要利用X射线衍射、场发射扫描电子显微镜和光致发光光谱等对其进行了表征。所制备的纳米棒具有六边形的端面,纳米棒的尺寸及端面边长分布范围窄,并且沿c轴方向(002)表现出了明显的择优化生长。此外,相比于玻璃基底或TiO2纳米颗粒薄膜,生长在介孔TiO2薄膜上的ZnO纳米棒阵列表现出了较好的取向生长,表明基底的表面结构和组成对ZnO纳米棒阵列的生长有显著的影响。根据基底有序的多孔结构,讨论了纳米棒阵列可能的生长机理。所得到的ZnO纳米棒阵列在室温下分别表现出了以370 nm为中心的强近紫外光和以530 nm为中心的弱绿光两条荧光谱带。     

Ag掺杂对n-ZnO纳米棒/p-GaN异质结结构和发光性能的影响

利用简单的水热合成法在p-GaN薄膜上制备了Ag掺杂的一维ZnO纳米棒（ZnO NRs）,并且研究了Ag掺杂对于ZnO NRs结构和形貌以及n-ZnO NRs/p-GaN异质结发光特性的影响。结果表明,不同Ag掺杂浓度的ZnO纳米棒截面均呈六边形的棒状结构,且纳米棒的取向垂直于衬底;XRD分析结果表明,随着Ag掺杂浓度的增加,ZnO纳米棒（0002）晶面的峰位向衍射角减小的方向移动,表明Ag⁺置换了ZnO晶格中的部分Zn²⁺后使其晶格常数略增加;随着Ag掺杂浓度的增加,ZnO纳米棒近带边发光峰发生一定的红移并且强度逐渐减弱,黄带发光峰逐渐增强,n-ZnO NRs/p-GaN异质结具有更好的传输效率。     

水热合成CdS纳米晶体的形貌控制研究

研究了水热合成CdS纳米晶体形貌的化学控制，选择不同的络合试剂为模板,研究其对水热合成CdS纳米晶体形貌的影响.实验发现若以络合试剂乙二胺、甲胺为模板时，产品CdS晶体的形貌分别为（20～30） nm×（200～600） nm和（40～50） nm×（200～600） nm尺寸的纳米棒;而以络合试剂吡啶、 氨为模板时，产品CdS晶体的形貌分别为平均尺寸约30 nm和20 nm的纳米颗粒.用XRD、TEM、XPS、PL和Raman光谱等技术对所得CdS纳米棒进行了表征.同时对水热合成CdS纳米晶体形貌的模板控制机制进行了探讨，提出了一种水热合成CdS纳米棒的络合物结构诱导生长机理.     

Solvothermal synthesis and luminescence properties of CdS:Mn nanorods

CdS:Mn nanorods have been produced via a solvothermal approach in the nonaqueous solvent of ethylenediamine. An absolutely dominant single Mn²⁺ emission originating from the d-d (⁴T₁-⁶A₁) transition was obtained in CdS:Mn nanocrystals at room temperature. The effects of varying reaction temperature, molar ratio of S/Cd, and reaction time on the crystallinity and luminescence of CdS:Mn nanocrystals were systematically investigated. 1% Mn²⁺-doped CdS nanorods without any other additives were synthesized at 130°C for 10 h with an S/Cd molar ratio of 2:1. They show a rod-like shape, and their luminescence intensity around 593 nm is almost the strongest of all the nanorod samples investigated. CdS:Mn nanorods promise potential applications in nanoscale electronic and photonic devices.     

CdSe and CdSe/CdS nanorod solids

We demonstrate the self-organization of CdSe nanorods into nematic, smectic, and crystalline solids. Layered colloidal crystals of CdSe nanorods grow by slow destabilization of a nanocrystal solution upon allowing the diffusion of a nonsolvent into the colloidal solution of nanocrystals. The colloidal crystals of nanorods show characteristic birefringence, which we assign to specific spherulite-like texture of each nanorod assembly. To demonstrate the general character of nanorod self-assembly technique, CdSe/CdS heterostructure nanorods were organized into highly luminescent superlattices.     

Controlled synthesis and luminescence of semiconductor nanorods

A variety of nearly monodisperse semiconductor nanocrystals, such as CdS, ZnS, and ZnS:Mn, with controllable aspect ratios have been successfully prepared through a facile synthetic process. These as-prepared nanocrystals were obtained from the reactions between metal ions and thioacetamide by employing octadecylamine or oleylamine as the surfactants. The effects of reaction temperature and time, ratios of thioacetamide to inorganic precursors, and the reactant content on the size and crystal purity of the nanorods, have been systematically investigated. The optical properties and the formation mechanism of the nanorods have also been discussed. For the next biolabel applications, these hydrophobic nanocrystals have also been transferred into hydrophilic colloidal spheres by means of an emulsion-based bottom-up self-assembly approach.     

Synthesis of hybrid CdS-Au colloidal nanostructures

We explore the growth mechanism of gold nanocrystals onto preformed cadmium sulfide nanorods to form hybrid metal nanocrystal/semiconductor nanorod colloids. By manipulating the growth conditions, it is possible to obtain nanostructures exhibiting Au nanocrystal growth at only one nanorod tip, at both tips, or at multiple locations along the nanorod surface. Under anaerobic conditions, Au growth occurs only at one tip of the nanorods, producing asymmetric structures. In contrast, the presence of oxygen and trace amounts of water during the reaction promotes etching of the nanorod surface, providing additional sites for metal deposition. Three growth stages are observed when Au growth is performed under air: (1) Au nanocrystal formation at both nanorod tips, (2) growth onto defect sites on the nanorod surface, and finally (3) a ripening process in which one nanocrystal tip grows at the expense of the other particles present on the nanorod. Analysis of the hybrid nanostructures by high-resolution TEM shows that there is no preferred orientation between the Au nanocrystal and the CdS nanorod, indicating that growth is nonepitaxial. The optical signatures of the nanocrystals and the nanorods (i.e., the surface plasmon and first exciton transition peaks, respectively) are spectrally distinct, allowing the different stages of the growth process to be easily monitored. The initial CdS nanorods exhibit band gap and trap state emission, both of which are quenched during Au growth.     

Thermal decomposition of [bis(salicylaldehydato)cadmium(II)] to CdS nanocrystals

The present investigation reports, the novel synthesis of nanocrystals CdS using thermal decomposition of [bis(salicylaldehydato)cadmium(II)], as a new precursor, and elemental sulfur in oleylamine. The as-synthesized CdS crystals have diameters about 10 nm. The products were characterized by X-ray diffraction (XRD) transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), ultraviolet–visible (UV–Vis) spectroscopy and Fourier transformed infrared (FT-IR) spectra. The results of this paper show that the shape and size of cadmium sulfide nanocrystals can be controlled systematically by adjusting certain reaction parameters, such as the reactant concentration, the reaction temperature and the reaction time. Cadmium sulfide nanoparticles and nanorods with different lengths have been successfully prepared.     

P3HT/CdS/TiO2/ZnO一维有序核壳式纳米棒阵列的构制及其在杂化太阳电池中的应用研究

采用恒电位法在铟锡氧化物导电玻璃(ITO)上制备了高度有序一维ZnO纳米棒阵列,将ZnO纳米棒阵列在TiO2溶胶中采用提拉法制备出了一维TiO2/ZnO核壳式纳米棒阵列.在一维TiO2/ZnO核壳式纳米棒阵列上电沉积CdS纳米晶得到一维CdS/TiO2/ZnO核壳式纳米棒阵列,然后在一维CdS/TiO2/ZnO核壳式纳米棒阵列上电沉积聚3-己基噻吩(P3HT)薄膜得到P3HT/CdS/TiO2/ZnO核壳式纳米结构薄膜.以该纳米结构薄膜电极为光阳极制备出新型纳米结构杂化太阳电池,研究了该类电池的光电转换性能,初步探讨了该类电池的工作机理.     

Homogeneously alloyed CdSxSe1-x nanocrystals: synthesis, characterization, and composition/size-dependent band gap

Alloy nanocrystals provide an additional degree of freedom in selecting desirable properties for nanoscale engineering because their physical and optical properties depend on both size and composition. We report the pyrolytic synthesis of homogeneously alloyed CdS(x)Se(1-x) nanocrystals in all proportions. The nanocrystals are characterized using UV-visible absorption spectroscopy, transmission electron microscopy, X-ray diffractrometry, and Rutherford backscattering spectrometry to determine precisely structure, size, and composition. The dependence of band gap on nanocrystal size and composition is elucidated, yielding a bowing constant of 0.29, in agreement with bulk values. In addition, the morphology of the resultant nanocrystals can be altered by changing the reaction conditions, generating structures ranging from homogeneous, spherical nanocrystals to one-dimensional gradient nanorods.     

Architectural control syntheses of CdS and CdSe nanoflowers, branched nanowires, and nanotrees via a solvothermal approach in a mixed solution and their photocatalytic property

Wurtzite CdS and CdSe nanostructures with complex morphologies such as urchin-like CdS nanoflowers, branched nanowires, and fractal nanotrees can be produced via a facile solvothermal approach in a mixed solution made of diethylenetriamine (DETA) and deionized water (DIW). The morphologies of CdS and CdSe nanocrystals can be easily controlled via tuning the volume ratio of DETA and DIW. Urchin-like CdS nanoflowers made of CdS nanorods are in a form of highly ordered hierarchical structures, while the nanowires are branched nanowires, and the fractal CdS nanotrees are a buildup of branched nanopines. The results demonstrated that solvothermal reaction in a mixed amine/water can access a variety of complex morphologies of semiconductor materials. The photocatalytic activity of CdS particles with different morphologies has been tested by the degradation of acid fuchsine under both UV and visible light, showing that the as-prepared branched CdS nanowires exhibit high photocatalytic activity for degradation of acid fuchsine.     

Synthesis of CuInS2@CdS Core‐Shell Nanocrystals

CuInS₂@CdS core‐shell nanocrystals were prepared in a wet chemical process. Transmission electron microscope (TEM), x‐ray energy dispersive spectroscopy (EDAX), x‐ray diffraction (XRD), absorption, and photoluminescence (PL) spectra were used to confirm the formation of the CuInS₂@CdS core‐shell structure. The growth of CdS shell not only increased the PL intensity, but also restrained the transformation of CuInS₂ from nanoparticles to nanorods after annealing, which was attributed to an effective chemical passivation of the CuInS₂ core by the CdS shell.