排序方式: 共有20条查询结果,搜索用时 437 毫秒
1.
GaAs与InP半导体光导开关特性实验研究 总被引:1,自引:0,他引:1
利用Ⅲ-Ⅴ族化合物半导体材料砷化镓(GaAs)和磷化铟(InP)及其掺杂材料制作的光导开关具有很好的时间响应及高功率输出特性.比较了这两种材料制作的不同电极间隙类型的光导开关的开关时间响应速度、导通光能与饱和触发激光能量、线性与非线性工作模式及触发稳定性等特性.结果表明,利用InP和GaAs两种材料制作的光导开关都具有达到皮秒级的超快时间响应,其对时间最佳响应与偏置电场有关.两种开关的多次触发时间抖动在几个皮秒范围,输出电压峰峰值抖动优于10%.GaAs开关的非线性工作电场阈值比InP开关低,更容易实现非线性输出. 相似文献
2.
3.
4.
The optical absorption of GaAs nanorings (NRs) under adc electric field and a terahertz (THz) ac electric field applied in the plane containing the NRs is investigated theoretically. The NRs may enclose some magnetic flux in the presence of a magnetic field perpendicular to the NRs plane. Numerical calculation shows that the excitonic effects are essential to correctly describe the optical absorption in NRs. The applied lateral THz electric field, as well as the dc field leads to reduction, broadening and splitting of the exciton peak. In contrast to the presence of a dc field, significant optical absorption peak arises below the zero-field bandgap in the presence ofa THz electric field at a certain frequency. The optical absorption spectrum depends evidently on the frequency and amplitude of the applied THz field and on the magnetic flux threading the NRs. This promises potential applications of NRs for magneto-optical and THz electro-optical sensing. 相似文献
5.
采用时空图和矩量法对单和多平行板Blumlein脉冲产生器的输出特性作了详细分析.数值计算表明, 为了获得良好的系统输出,开关的导通电阻必须尽可能小;为了获得最大的能量输出或最大的电压输出,所需采用的匹配负载电阻不同;多Blumlein层叠结构的电压匹配负载电阻可以通过单Blumlein的电压匹配负载来估计,而能量匹配负载电阻不能直接根据单Blumlein的能量匹配负载电阻来估算;Blumlein传输线的板间距与板宽之比决定了系统的电压匹配负载和能量匹配负载的大小,并显著影响匹配条件下的电压倍增因子和能量输出效率. 相似文献
6.
This study presents an eye-safe, single-mode, nanosecond-pulsed, and all-fiber laser source with master- oscillator-power-amplifier configuration at 1 550 nm that is suitable for high-resolution three-dimensional (3D) imaging light detection and ranging (LIDAR) system. The output peak power of 7.6 kW is obtained at the 1.2-ns pulse width and 50-kHz repetition rate. The single-mode pulse laser output ensures the range precision and imaging results of the LIDAR system. The laser is used as a transmitter for the 3D imaging LIDAR system. The detailed characteristics of the LIDAR system and the results of the 3D imaging are presented. 相似文献
7.
8.
9.
Cr4+∶YAG被动调Q微晶片激光器重复频率稳定性研究 总被引:2,自引:2,他引:0
对连续激光二极管抽运Nd∶YVO4/Cr4+∶YAG被动调Q微晶片激光器输出激光重复频率的稳定性进行了理论和实验研究.结果表明,谐振腔内存在最佳净增益,可以使激光器工作在稳定区.通过优化腔内的净增益,耦合输出镜反射率为85%,饱和吸收体初始透射率为70%,抽运功率从1.05 W到1.20 W的情况下,激光器工作在稳定区.当抽运功率为1.16 W时,获得了重复频率为19.48 kHz,稳定性优于0.68%(RMS)的高重复频率激光输出.进一步分析了抽运功率抖动对输出激光重复频率稳定性的影响.结果表明,激光器进入稳定区之后,抽运功率的抖动是制约输出激光重复频率稳定性进一步提高的最主要因素.针对抽运功率抖动带来的影响,讨论了增益预抽运技术,并比较了其优缺点. 相似文献
10.
介绍了一种新型的空间望远镜,通过改变光学系统焦距,可以提高任意感兴趣视场的成像分辨率。光学系统有四个反射镜组成,包括两个静态非球面反射镜和两个面形动态可调非球面反射镜.通过改变两个可变形反射镜的面形,系统焦距可以在399 mm到558 mm范围内进行动态调整.和机械式变焦系统相比,此主动变焦系统避免了光学元件的精密移动,有效减少反应时间。分析了此系统的成像质量,给出了0°、0.51°、0.7°不同视场的弥散斑:1.6 μm、1.0 μm、1.7 μm,及传递函数:在68 lp/mm 时,MTF曲线值大于0.7.此新型成像技术还可以有效减少数据传输链带宽需求,在遥感领域具有广阔的应用前景. 相似文献