High-peak-power,single-mode,nanosecond pulsed,all-fiber laser for high resolution 3D imaging LIDAR system

This study presents an eye-safe, single-mode, nanosecond-pulsed, and all-fiber laser source with master- oscillator-power-amplifier configuration at 1 550 nm that is suitable for high-resolution three-dimensional (3D) imaging light detection and ranging (LIDAR) system. The output peak power of 7.6 kW is obtained at the 1.2-ns pulse width and 50-kHz repetition rate. The single-mode pulse laser output ensures the range precision and imaging results of the LIDAR system. The laser is used as a transmitter for the 3D imaging LIDAR system. The detailed characteristics of the LIDAR system and the results of the 3D imaging are presented.     

Cr4+∶YAG被动调Q微晶片激光器重复频率稳定性研究

对连续激光二极管抽运Nd∶YVO4/Cr4+∶YAG被动调Q微晶片激光器输出激光重复频率的稳定性进行了理论和实验研究.结果表明,谐振腔内存在最佳净增益,可以使激光器工作在稳定区.通过优化腔内的净增益,耦合输出镜反射率为85%,饱和吸收体初始透射率为70%,抽运功率从1.05 W到1.20 W的情况下,激光器工作在稳定区.当抽运功率为1.16 W时,获得了重复频率为19.48 kHz,稳定性优于0.68%(RMS)的高重复频率激光输出.进一步分析了抽运功率抖动对输出激光重复频率稳定性的影响.结果表明,激光器进入稳定区之后,抽运功率的抖动是制约输出激光重复频率稳定性进一步提高的最主要因素.针对抽运功率抖动带来的影响,讨论了增益预抽运技术,并比较了其优缺点.     

高重复频率、单模纳秒脉冲全光纤激光器

报道了一种基于主振荡放大技术的全光纤脉冲激光器.种子激光器使用直接调制的单纵模半导体激光器,其输出波长为1 063.8 nm,重复频率100 kHz～10 MHz连续可调谐,光纤放大器采用了多级放大器级联的方法.在重复频率100 kHz、脉冲宽度5 ns时,激光器获得了平均功率为1.2 W,峰值功率为2.4 kW的单横模激光脉冲输出.     

高重复频率、单模纳秒脉冲全光纤激光器

报道了一种基于主振荡放大技术的全光纤脉冲激光器.种子激光器使用直接调制的单纵模半导体激光器,其输出波长为1 063.8 nm,重复频率100 kHz~10 MHz连续可调谐,光纤放大器采用了多级放大器级联的方法.在重复频率100 kHz、脉冲宽度5 ns时,激光器获得了平均功率为1.2 W,峰值功率为2.4 kW的单横模激光脉冲输出.     

Cr^4＋：YAG被动调Q微晶片激光器重复频率稳定性研究

对连续激光二极管抽运Nd：YVO4/Cr4 ：YAG被动调Q微晶片激光器输出激光重复频率的稳定性进行了理论和实验研究结果表明,谐振腔内存在最佳净增益,可以使激光器工作在稳定区通过优化腔内的净增益,耦合输出镜反射率为85%,饱和吸收体初始透射率为70%,抽运功率从1.05 W到1.20 W的情况下,激光器工作在稳定区当抽运功率为1.16 W时,获得了重复频率为19.48 kHz,稳定性优于0.68%(RMS)的高重复频率激光输出进一步分析了抽运功率抖动对输出激光重复频率稳定性的影响结果表明,激光器进入稳定区之后,抽运功率的抖动是制约输出激光重复频率稳定性进一步提高的最主要因素针对抽运功率抖动带来的影响,讨论了增益预抽运技术,并比较了其优缺点.     

Low-repetition rate,nanosecond,high-power pulse amplifier system based on Yb-doped rod-type fiber

We report a nanosecond-pulse amplification system based on an Yb-doped,100-μm core,rod-type photonic crystal fiber.Up to 10 W of average power with pulse energy of 1 mJ and peak power of 450 kW is obtained at the repetition rate of 10 kHz.The high-power nanosecond pulse has a good pulse shape and spectral characteristics.The usage of rod-type fibers provides a novel structure for nanosecond pulse amplification.     

Eye-safe, high-energy, single-mode all-fiber laser with widely tunable repetition rate

We present a novel high-energy, single-mode, all-fiber-based master-oscillator-power-amplifier （MOPA） laser system operating in the C-band with 3.3-ns pulses and a very widely tunable repetition rate, ranging from 30 kHz to 50 MHz. The laser with a maximum pulse energy of 25 μJ and a repetition rate of 30 kHz is obtained at a wavelength of 1548 nm by using a double-clad, single-mode, Er：Yb co-doped fiber power amolifier.     

主控抽运被动调Q激光器和输出特性

对脉冲抽运与增益预抽运的微腔Cr4+:YAG/Nd:YAG被动调Q激光器的稳定性进行了理论和实验研究。结果表明在抽运时抽运脉宽和重复率较大的情况下,输出激光脉冲相对于抽运脉冲抖动范围明显加大。针对此情况,采用压缩抽运脉宽和降低重复率的方法获得了波长为1.06 μm、脉宽为3.8 ns、单脉冲能量为65 μJ、相对抽运脉冲的抖动范围小于0.8 μs的激光输出。同时分析了增益预抽运的优势和缺点。