sl玻色子体系在U(2l+1)O(2l+2)过渡区的严格解

利用无穷维李代数方法得到了相互作用sl玻色子体系在U( 2l+ 1 ) O( 2l+ 2 )过渡区的能谱和波函数的严格解 .给出了该系统Bethe假定方程的数值解法 .     

Nilsson平均场加邻近轨道对力模型对超铀区和稀土区核素的描述

利用严格可解的平均场加邻近轨道对力模型, 在区分质子和中子及冻结质子对激发两种情况下对超铀区核素^226—234Th, ^230—239U, ^236—243Pu, 及稀土区核素^160—170Er, ^166—176Yb, ^172—180Hf的结合能, 对激发能, 奇偶能差及偶偶核最低激发态转动惯量进行了计算并与实验结果进行了比较.     

sl玻色子体系在U(2l+1)→O(2l+2)过渡区的严格解

利用无穷维李代数方法得到了相互作用sl玻色子体系在U(2l+1)→O(2l+2)过渡区的能谱和波函数的严格解. 给出了该系统Bethe假定方程的数值解法.     

纯锆上离子注入钇和镧后的表面分析

用金属蒸汽真空弧源，以40kV加速电压对纯锆样品分别进行了10¹⁶—10¹⁷/cm²的钇、镧离子注入，注入温度约为130℃.然后对注入样品进行表面分析.x射线光电子能谱分析表明，注入的钇以Y₂O₃形式存在，镧以La₂O₃形式存在.俄歇电子能谱表明，纯锆基体表面的氧化膜厚度随着离子注入剂量的增加而增加，当离子注入剂量达到10¹⁷/cm²时，氧化膜的厚度达到了最大值.卢瑟福背散射显示镧层的厚度约为30nm，同时直接观察到当离子注入剂量为(La+Y)10¹⁷/cm²时，纯锆样品表面发生了严重的溅射. 关键词： 纯锆 钇和镧离子共注入 卢瑟福背散射 x射线光电子能谱     

SD对壳模型: 偶偶Pt核低激发态性质

利用SD对壳模型讨论了偶偶Pt核低激发态的集体性质. 结果发现在该模型下, 利用一个仅含有3个参数的哈密顿量, 可以很好地再现偶偶Pt核低激发谱的集体性质.     

面粉中滑石粉的X射线衍射分析

通过四氯化碳分离或高温灰化,X射线衍射分析测定面粉中掺入的滑石粉。其中灰化处理适宜温度为500~750℃。该方法简便、快速,灵敏度高,样品用量少,准确可靠,可推广为检测面粉质量的一种较理想的手段。     

Elastic Modulus and Hardness of Cr-Nb Nano-Multilayers

Cr-Nb nano-multilayered films with various modulation wavelengths A are prepared by e-gun evaporation and their mechanical properties are investigated. Cr and Nb both have bcc structures with large differences in lattice constants and Young＇s modulus, which are supposed to favour modulus enhancement. Nevertheless, nano-indention measurements show no enhancement for the modulus and a slight decrease for the hardness with decreasing A down to 5 nm. This is mainly due to counter-contribution to modulus from adjacent layers subjected to reverse strains, in agreement with recent theoretical study, while the decrease of hardness arises from grain boundary sliding. Interestingly, at A = 3 nm, the hardness of the film has an increase of 44% relative to the value of a rule of mixture, owing to the emergence of a new phase for reconciling the structure difference at the interfaces.     

1.3 GHz超导腔的电化学青铜法铌三锡镀膜技术

由于射频超导腔具有高品质因数Q₀,大束流孔径等诸多优势,已被加速器行业广泛应用。目前纯铌腔的性能已经接近理论极限,使用Nb₃Sn薄膜腔代替纯铌腔是突破这一限制的有效手段。铌三锡具有较高的超导转变温度和过热磁场,理论预期可以大幅度提高SRF腔体工作温度和加速梯度。目前,Nb₃Sn薄膜制备技术蓬勃发展,其中锡蒸汽扩散法已经比较成熟,已制备出初步满足工程需求的铌基铌三锡薄膜射频超导腔。但是由于反应温度在1100℃以上,锡蒸汽扩散法无法摆脱纯铌基底,因此不可避免地在机械稳定性、导热性等方面有缺陷,难以满足未来高可靠性加速器的应用。青铜法广泛应用于铌三锡线缆的制备,热处理温度不高于700℃,具有制备铜基铌三锡镀膜腔的潜力。此外,电化学镀膜与其他方式相比,具有成本低、反应过程容易控制、常温常压等明显优势。本工作将上述两种工艺结合起来,研究了电化学方式在1.3 GHz铌基超导腔上镀青铜前驱体,之后热处理合成铌三锡薄膜腔。垂测结果表明,4.2 K下的薄膜腔本征Q₀为6×10⁸左右且仍具很大提升...     

Evolution of domain structure in Fe_3GeTe_2

Two-dimensional(2D)magnets provide an ideal platform to explore new physical phenomena in fundamental magnetism and to realize the miniaturization of magnetic devices.The study on its domain structure evolution with thickness is of great significance for better understanding the 2D magnetism.Here,we investigate the magnetization reversal and domain structure evolution in 2D ferromagnet Fe₃GeTe₂(FGT)with a thickness range of 11.2-112 nm.Three types of domain structures and their corresponding hysteresis loops can be obtained.The magnetic domain varies from a circular domain via a dendritic domain to a labyrinthian domain with increasing FGT thickness,which is accompanied by a transition from squared to slanted hysteresis loops with reduced coercive fields.These features can be ascribed to the total energy changes from exchange interaction-dominated to dipolar interaction-dominated with increasing FGT thickness.Our finding not only enriches the fundamental magnetism,but also paves a way towards spintronics based on 2D magnet.     

(±)-茶螺烷酮的合成

在超声辐射下,β-环柠檬醛与丙酮经加成反应制得中间体3;3经硼氢化钠还原、硫酸氢钾催化脱水环化、N-羟基邻苯二甲酰亚胺/乙酰丙酮亚钴(Ⅱ)[NHPI/Co(acac)2]催化氧化烯丙位碳合成了(±)-茶螺烷酮,总收率54.5%,其结构经1HNMR,IR,MS和元素分析表征。