飞行管理问题的实时算法

本文讨论了在一定区域空间内进行飞行管理避免飞机相撞的模型，提出了直接搜索法和非线性规划（SUMT）法两种解法，并将两种方法有机结合，得出的算法在486微机上计算时间小于10秒，误差不超过0.01度，完全符合问题的要求。本文接着给出四种不同情况分别用两种方法求解，进行比较检验，取得很好的吻合，充分说明了模型3的可靠性。本文还对模型的误差进行分析并对模型进行推广。     

玻色─爱因斯坦关联半径和源半径对实验窗口的依赖及它们的差异

研究了１６０ＡＧｅＶＰｂ＋Ｐｂ反应中π源的玻色─爱因斯坦关联半径和源半径（均方根半径）的关系，以及它们对实验窗口的依赖。模型冗源由ＵＲＡＳｉＭＡ生成器产生。研究表明关联半径和源半径不仅数值不等，而且变化行为也不同。     

ON THE STRUCTURE OF CONTINUA AND THE MATHEMATICAL PROPERTIES OF ALGEBRAIC ELASTODYNAMIC OF A TRICLINIC STRUCTURAL SYSTEM

This paper is neither laudatory nor derogatory but it simply contrasts with what mightbe called elastostatic(or static topology),a proposition of the famous six equations.Theextension strains and the shearing strainsfor all i,j,k=1,2,3.which were derived by A.L.Cauchy,are linearly expressed in terms of nine partialderivatives of the displacement function(u_i,u_j,u_k)(?)u(x~i,x~j,x~k)and it is impossiblefor the inverse proposition to sep up a system of the above six equations in expressing thenine components of matrix((?)(u_i,u_j,u_k)/(?)(x~i,x~j,x~k)).This is due to the fact that ourgeometrical representations of deformation at a given point are as yet incomplete .On theother hand,in more geometrical language this theorem is not true to any triangle,exceptorthogonal,for“squared length”in space.The purpose of this paper is to describe some mathematic laws of algebraicelastodynamics and the relationships between the above-mentioned important questions.     

一维链状锰配位聚合物[Mn(4-CPOA)(2,2-bipy)(H_2O)]_n的合成与晶体结构(英文)

0IntroductionThe solid-state chemistry of manganese!car-boxylate coordination polymers has received growingattention over the past few years,owing to their fasci-nating network topologies and potential application inthe field of molecular magnetism and bi…     

Ce0.8Y0.2O1.9-Ca3(PO4)2-K3PO4复合电解质在中温区的质子导电性及在常压合成氨中的应用

A precursor of Ce_0.8Y_0.2O_1.9(YDC) solid electrolyte was synthesized by the gol-gel method. YDC and phosphates powders were prepared by mixing the YDC and phosphates according to different weight ratios. The mixtures of the YDC and binary phosphates were ground and sintered at 1 400 ℃. The proton conductivity in solid electrolyte of the sintered samples was examined using electrochemical methods at 400～800 ℃. Ammonia was synthesized from nitrogen and hydrogen at atmospheric pressure in the solid state proton conducting cell reactor. The optimal condition for the ammonia production was determined. The result indicated that composite electrolyte of 80wt% YDC: 20wt% binary phosphates as proton conductor could obtain the highest ionic conductivity and ammonia production rate among the four samples, the rate of evolution of ammonia was up to 9.5 × 10^-9 mol·s^-1·cm^-2.     

氧化锌薄膜的电化学沉积和表征

以透明导电玻璃(TCO)为衬底，用硝酸锌水溶液作为电解液，研究了阴极还原沉积ZnO薄膜的反应机理和电化学行为. 通过改变工艺条件来控制ZnO的生长速率， 得到了粒径为10～15 nm的纳米ZnO薄膜. XRD分析显示纳米ZnO薄膜纯度高， 呈纤锌矿结构. 光学测试结果表明，在可见光区其透光度高达90%，禁带宽度为3.37 eV.     

三维网状的4-羧基苯氧乙酸锶(Ⅱ)配位聚合物[Sr2(4-CPOA)2(H2O)5]n的合成、结构与热稳定性研究

A novel coordination polymer of [Sr₂(4-CPOA)₂(H₂O)₅]_n (where 4-CPOA^2- is 4-carboxylphenoxyacetate) has been synthesized and characterized by elemental analysis, IR, TG and single crystal X-ray diffraction. The title complex belongs to monoclinic system with space group C2/c, a=2.563 9(5) nm, b=1.162 7(2) nm, c=0.742 96(15) nm, β=99.64(3)°. V=2.183 5(7) nm³, Z=4, M_r=653.60, D_c=1.988 g·cm^-3, R=0.027 8, wR=0.058 1. The strontium atom has a bicapped triangular prismatic coordination geometry, involving four oxoacetate oxygen atoms, one ether oxygen atom from different 4-CPOA^2- ligands and three water molecules. The strontium(Ⅱ) ions are linked by 4-CPOA^2- ligands and water molecules to form a 3D network structure. CCDC: 223313.     

在TM-HgI_2体系中TmI_2生成机理

引言TmI_2的合成早已有报导,一般采用TmI_3与相应的金属(铥)反应制取。但由于TmI_3易吸水,操作不便。而Tm与HgI_2的反应,反应物可以在空气中按化学计算量称量,操作方便。因稀土二价碘化物歧化稳定性不同,不同稀土二价碘化物的制备方法不同。在制备TmI_2时选用Tm与HgI_2反应,但按文献做法总含有TmI_3。为此我们研究了Tm-HgI_2体系间的反应机理,以期得到较纯的产物。     

一种低成本高含量曲克芦丁的制备方法

本文以市售芦丁为原料,在吡啶中经醋酸酐酰化后再水解得外标含量为99.7%的高纯度芦丁;然后以此高纯度芦丁为原料,以3代聚酰胺-胺树枝状聚合物为催化剂,在甲醇中经环氧乙烷羟乙基化反应,精制后得高含量曲克芦丁。本文系统研究了以高纯度芦丁为原料,反应温度、时间和压强对曲克芦丁合成的影响。实验表明,芦丁经酰化后再水解可得到纯度为99.7%的高纯度芦丁,在高压釜内,压强0.2MPa、温度80℃条件下反应5 h,得到的粗品曲克芦丁只需简单纯化便可得到外标纯度大于98.5%的曲克芦丁。     

导电聚苯胺/钙基膨润土复合材料的制备

采用插层聚合法制备了导电聚苯胺/钙基膨润土、聚苯胺/有机化膨润土复合材料.以电导率为考核指标,通过正交设计优化了苯胺的加入量、反应温度和反应时间等参数.结果表明,苯胺的加入量影响较显著,反应温度对聚苯胺/有机化膨润土复合材料影响较聚苯胺/钙基膨润土体系明显,反应时间的延长,有利于聚苯胺/有机化膨润土复合材料电导率的提高.聚苯胺/钙基膨润土复合材料制备的最佳工艺条件为:苯胺加入量为70%,反应温度为0℃,反应时间为6 h;聚苯胺/有机化膨润土复合材料制备的最佳工艺条件为:苯胺加入量为70%,反应温度为室温,反应时间为8 h.利用红外光谱(FT-IR)、X射线衍射(XRD)和四探针技术表征了材料的组成、结构和性能.结果表明:膨润土经有机化后,晶面间距增大较多;苯胺单体与钙基膨润土插层聚合后,膨润土晶面间距增大不多;苯胺单体与有机化膨润土复合后,破坏了膨润土的晶格结构,形成了混杂复合体系,电导率达10-3S.cm-1.