Photoluminescence Characterization of Silicon Nanoparticles Hybridized Europium Complex

A europium complex Eu (DBM)3 TPPO (Eu tris(benzoylmethide)-(triphenylphosphine oxide)) and silicon nanoparticles have been hybridized.The hybridization can evidently change the photoluminescence (PL) characteristics of the Eu complex in the following aspects:under an excitation of 390nm,the intensity of the PL peak at 611nm due to the ^5Du-^7F2 transition of the Eu^3 ions has been increased by 30%,and thc integrated PL intensity in the visible range has been increased by nearly 3 times;the PL excitation efficiency beyond 440nm has been improved cvidently;the peak in the PL excitation spectrum shifts from 408nm to 388nm,and the PL decay time decreases from 2.07 to 0.96μs,The experimental results indicatde that in the PL process,the photoexcited energy may transfer from the silicon nanoparticlcs to the Eu^3 ions.     

硫化态K—MoO3／γ—Al2O3催化剂表面物种的XPS研究

采用Ｘ光光电子能谱及曲线氦合手段对硫化态Ｋ－ＭｏＯ３／Ａｌ２Ｏ３合成醇催化剂进行了研究，分别考察负载量及硫化前不同条件预处理对催化剂表面的Ｓ、Ｍｏ组分的物种形式及各物种相对含量的影响，以及表面不同组分的相对组成。结果表明，根据其电子结合能变化，Ｓ组分可区分为ＳＯ＾２－４、ＳＯ３、Ｓ＾０、ＭｏＳ２、ＭｏＳ２－ｘ等六种存在形式不同的物种；Ｍｏ组分可分为Ｍｏ＾６＋、Ｍｏ＾５＋、ＭｏＳ＾２＋、ＭｏＳ２、Ｍ     

LIQUID CHLOROPRENE-HYDROXYETHYL METHACRYLATE COPOLYMER MODIFIED EPOXY RESIN Ⅱ. N, N-DIMETHYL BENZYL AMINE CURING SYSTEM

A series of liquid chloroprene-hydroxyethyl methacrylate copolymer (CP-HEMA) modifiedepoxy resin were prepared. The effects of CP-HEMA content, curing conditions on physical pro-perties of the modified system were examined. With IR and Viscoelastocuremeter, the curing reactionrate was determined and the mechanism of the curing reaction was discussed. The effects of CP-HEMA content and curing conditions on morphology were mainly observed by scanning electronmicroscopy.     

还原温度对超细K－Co－Mo催化剂合成低碳醇性能的影响

 用溶胶－凝胶法合成了K－Co－Mo催化剂．样品经不同温度还原后，用于低碳醇的合成．XRD和HRTEM结果表明，样品是超细粒子，粒子尺寸为2～5nm．考察了催化剂的还原温度和反应条件对催化剂性能的影响．实验结果表明，还原温度对催化剂的活性有较大的影响，最佳还原温度为500℃．最佳反应温度范围为310～330℃．升高压力和空速可以提高醇的收率和选择性．在空速14400h－1，压力6．0MPa和温度310℃的条件下，醇的选择性为55．8％，收率为520．0g／（kg·h），MeOH／C2＋OH为0．27．催化剂稳定性良好，在200h的寿命实验中，活性基本不变．与文献中催化剂相比，超细K－Co－Mo催化剂对合成醇具有较高的活性和选择性，尤其是对C2＋OH的合成明显高于其他合成醇催化剂体系．     

掺铒a-SixC1-x-H薄膜的发光特性

用等离子体增强化学气相沉积（PECVD）的方法，以固定的氢气（H2）流量和不同的硅烷（SiH4）和甲烷（CH4）流量比沉积了一系列的氢化非晶SiC（a-Si，C1-x-H）膜。用这种宽带隙的a-SixC1-x-H材料作为掺铒的基体材料，通过离子注入的方法得到掺铒的a-SixC1-x-H（a-SixC1-x-H：Er）膜。注入以后的样品经过不同温度的退火。用X射线光电子能谱（XPS）、红外吸收光谱（IR）、拉曼散射谱（Raman）等技术研究不同的SiH4／CH4流量比和退火温度对a-SixC1-x-H：Er发光强度的影响。结果表明，高温退火引起了膜中C的分凝，对饵的发光是不利的。通过低温和室温下铒发光强度的比较，表明这种材料具有较弱的温度猝灭效应。     

一种新型联萘基旋光共轭聚合物的圆二色谱和圆偏振荧光光谱

众所周知 ,聚合物的光电性质依赖于聚合物链的构象和 (或 )组成 ,通过在聚合物上引入手性单元 ,采用圆二色谱 ( CD)和圆偏振荧光光谱 ( CPL)等方法可表征聚合物结构 [1] .近年来 ,由于圆偏振光可用作光数据存储和液晶显示器背景光 [2 ] ,人们开始注重共轭聚合物圆偏振光材料的研究 .共轭聚合物的光致和电致圆偏振光的现象由一种带手性侧链的聚噻吩[3 ] 和一种带手性侧链的聚 (对苯撑乙烯 ) [4 ]产生 ,但它们的圆偏振荧光度 (用不对称因子 glum=2 ( IL-IR) / ( IL+IR)表示 ,IL 和 IR 分别指左圆偏振光强度和右圆偏振光强度 )相对较低 …     

微量贵金属对Co/γ-Al2O3的作用及其结构表征Ⅱ.Co-M/α-Al2O3的XAFS表征

采用ＸＡＦＳ方法分别对Ｃｏ的近边结构和配位状态进行了详细的表征，ＸＡＮＥＳ的结果表明，所有样品中Ｃｏ均处于不对称的配位环境中，在吸收阈值处，形成了Ｉｓ→４ｐ吸收峰，并且该峰发生了分裂，尤其是Ｃｏ／γ－Ａｌ２Ｏ３分裂现象最为明显，对于Ｃｏ－Ｍ／γ－Ａｌ２Ｏ３（Ｍ＝Ｐｔ，Ｐｄ，Ｒｈ），这种不对称性可能来源于Ｃｏ的高度分散性及贵金属与Ｃｏ之间的相互作用，而对于Ｃｏ／γＡｌ２Ｏ３则与四面体配位的Ｃｏ＾２＋     

溶胶-凝胶法制备还原态K-Co-Mo催化剂的合成醇性能

应用溶胶-凝胶法制备了还原态K-Co-Mo催化剂, 比较了不同的组分和不同的反应条件对合成醇性能的影响。实验结果表明，适量钾和钴助剂的添加能显著提高催化剂合成醇的性能，尤其是提高了C2+醇的选择性。此外，反应温度、压力以及空速对合成醇影响明显，升高温度可以提高催化反应中低碳醇的收率，但选择性下降；增加压力和空速可以提高低碳醇的收率和选择性，对合成低碳醇有利。在230 ℃，6.0 MPa，14 400 h－1条件下，催化剂合成低碳醇的收率为375.4 g/kg·h，选择性为70.2%，C1OH/C2+OH为0.48。     

硫化态K—Mo合成低碳醇催化剂的制备条件和载体效应研究

用浸渍法制备以KCl为助剂的ZrO_2、γ-Al_2O_3和SiO_2负载硫化态钼基催化剂,研究了钼和助剂钾两种组分浸渍顺序、助剂含量、载体差别以及浸渍溶液的酸碱性对催化剂上CO加氢合成低碳混合醇性能的影响。ZrO_2按先钼后钾、γ-Al_2O_3和SiO_2则按相反的顺序浸渍两种组分、且K/Mo原子比分别为0.5,0.8和1.0制备催化剂,其合成醇活性最佳。由于载体性质的差异,K-Mo/SiO_2、特别是K-Mo/ZrO_2的合成醇活性强烈依赖于钾助剂含量。而K-Mo/SiO_2在较宽的钾含量范围内,其活性差别不明显。适当选择较高碱性的浸渍溶液制备K-Mo/γ-Al_2O_3催化剂,有利于醇活性的提高。     

POLYURETHANE-POLYSTYRENE INTERPENETRATING NETWORKS

A series of polyurethane based on liquid chloroprene-hydroxyethyl methacrylate copolymer(CP-co-HEMA)-polystyrene (PS) interpenetrating polymer networks (PU-PS IPN) were synthe-sized. Some physical properties were examined and density behavior was investigated. In 60%polyurethane (PU) system, the tensile strength and density increased greatly. Transmission electronmicrographs showed that the phase separation existed and the sizes of PS domains dispersed in PUphase were about 500-4,000 A. In comparison with correlative PU-PMMA IPN system, whichhas the higher compatibility, this system showed an extensive phase separation and clear boundaries.There was no phase inversion observed even for 60% PU system in which PS was still the dispersed phaseand PU the continuous phase. This was due to the relatively faster rate of formation of PU than thatof ST polymerization.