碳纳米管膜的高温纯化研究

为了获得纯度更高的碳纳米管膜, 保证材料发热稳定性, 需要对通过化学气相沉积法得到的碳纳米管膜进行二次纯化. 通过使用高温纯化炉, 在真空状态下, 从1700℃到3200℃分7挡温度对碳纳米管进行纯化, 并对其含碳量和方块电阻进行比较. 结果表明, 高温纯化后的碳纳米管膜含碳量从95.0%提高到99.9%, 解决了含碳量低的问题. 同时, 在高温纯化中发现碳纳米管膜方块电阻从纯化前3Ω降低到0.5Ω, 方块电阻的降低对碳纳米管膜具有十分重要的意义, 同样对碳纳米管膜后续产品的开发也有重要作用.     

托卡马克中磁流体不稳定性与高能量离子相互作用

在托卡马克中,磁流体不稳定性与高能量离子相互作用是一个非常重要的问题,它对未来聚变堆稳态长脉冲运行至关重要。HL-2A是我国第一个具有先进偏滤器位形的非圆截面的托卡马克核聚变实验研究装置。撕裂模是托卡马克中的一种基本的电阻磁流体不稳定性,它可以改变磁场的拓扑结构,形成输运短路,甚至会触发大破裂。高能量离子在燃烧等离子体和各种外部辅助加热过程中是不可避免会产生的。目前,撕裂模与高能量离子相互作用依然存在一些关键性问题,例如撕裂模与高能量离子相互作用的共振关系、该物理过程导致高能量离子损失的物理机理等,并且还没有完整的关于撕裂模与高能量离子共振相互作用的数值模拟工作。因此,本综述论文主要从以下三个方面展开:1)回顾撕裂模与高能量离子相互作用的研究历史;2)基于HL-2A实验,从数值模拟的角度讨论撕裂模与高能量离子共振相互作用的物理机理以及其导致高能量离子损失的物理机制;3)展望未来聚变堆中撕裂模与高能量离子相互作用的情况。     

单层MXene纳米片Ti2N电磁特性的过渡金属(Sc、V、Zr)掺杂效应

二维材料MXene纳米片由于具有较大的比表面积和较高的电子迁移率而受到广泛的关注。本文采用基于密度泛函理论的第一性原理计算,对单层MXene纳米片Ti₂N电磁特性的过渡金属(Sc、V、Zr)掺杂效应进行了系统研究。结果表明,所有过渡金属掺杂体系结合能均为负值,结构均稳定;其中Ti₂N-Sc体系的形成能为-2.242 eV,结构更易形成,且保持稳定;掺杂后Ti₂N-Sc、Ti₂N-Zr体系磁矩增大;此外,Ti₂N-Sc体系中保留了较高的自旋极化率,达到84.9%,可预测该体系在自旋电子学中具有潜在的应用价值。     

狄拉克材料BaMnBi2的单晶制备和物理性质研究

在本工作中,我们成功制备了层状过渡金属磷族化合物BaMnBi2单晶样品,并研究了该化合物的磁学性质和电学输运性质.准二维化合物BaMnBi2具有四方晶体结构,主要包含有两个Bi四方格子层和一个共边的MnBi4四面体层.磁化率显示BaMnBi2在TN ＝288 K以下发生反铁磁相变,并表现出很强的磁各向异性.在反铁磁相变温度TN 以上,磁化率随温度呈线性关系,暗示体系在顺磁态具有很强的反铁磁关联.电阻率随温度变化曲线和在磁场下电阻率随角度的变化曲线都表明BaMnBi2具有准二维的电子结构.磁场导致的金属-绝缘体转变和低温下大的非饱和线性磁阻,与Bi四方格子层存在狄拉克费米子是一致的.     

基于DIS数字信息化系统对透光物质透光性能的研究

采用DIS数字信息化系统,对不同浓度的蓝墨水溶液在激光光源照射下的透射平均照度及照度分布图像进行实验研究,得到了平均照度值随溶液浓度变化的规律。对不同颜色塑料膜片对白炽灯光源透过照度值及照度分布图像进行实验研究得到及其相关之规律。     

多级离散小波变换的高效超大规模集成架构

设计了一种单时钟域内低级展开、高级折叠的多级离散小波变换架构;采用横向三输入扫描方式,基于9/7离散小波变换提升算法,设计第1级离散小波变换模块;根据第2级离散小波变换的时钟周期与有效输入数据之比,设计半折叠的第2级离散小波变换模块;将第3级及更高级的离散小波变换的架构折叠到第2级离散小波变换架构上,从而降低了硬件资源的消耗。结果表明:对于大小为512 pixel×512 pixel的经3级离散小波变换处理的输入图像,所提架构的硬件效率比其他现有架构提高了57.1%以上。     

离子对反相高效液相色谱法同时测定尿液中复方α-酮酸片的5种有效成分

建立了同时测定尿液中复方α-酮酸片5种有效成分(消旋羟蛋氨酸钙(HMACa)、酮缬氨酸钙(KVCa)、消旋酮异亮氨酸钙(KILCa)、酮亮氨酸钙(KLCa)和酮苯丙氨酸钙(KPACa))的离子对反相高效液相色谱法。分别考察了离子对试剂浓度、缓冲盐浓度和流动相pH值等参数对分离情况的影响。最终采用Waters Symmetry C18色谱柱(250 mm×4.6 mm,5μm);以乙腈和含15 mmol/L四丁基氢氧化铵的20 mmol/L磷酸盐缓冲液(pH 7.0)为流动相进行梯度洗脱,流速为1.0 mL/min;柱温为35℃;检测波长为210 nm。在上述条件下,5种有效成分得到很好的分离,并且不受尿液中内源性基质的干扰,在20~200 mg/L范围内线性关系良好(r≥0.999 0);HMACa、KVCa、KILCa、KLCa和KPACa的检出限(S/N=3)分别为3.0、5.0、3.6、5.7和2.5 mg/L;定量限(S/N=10)分别为9.6、16.7、12.0、19.0和8.3 mg/L;日间、日内精密度均小于7%;平均回收率在86.79%~112.00%之间,RSD小于9%(n=5)。该方法准确,灵敏度高,重现性好,适用于尿液中这5种有效成分的检测。     

CoP纳米片制备及其电催化产氢性能的研究

高稳定性的催化剂对于规模化电催化产氢起着关键的作用.因此,采用简单的方法合成CoP纳米片,其表现出优越电催化活性和稳定性. CoP纳米片采用水热法和在氩气中磷化法制备的,纳米片的厚度为100～300 nm.CoP纳米片在0.5 M H2SO4的电解质中,表现出良好的电化学产氢性能,起始过电为～75 mV,塔菲尔斜率为～39. 67 mV/decade,当电流密度为10 mA· cm-2,过电压为～125 mV,经过1000次的循环后,保持良好的稳定性能.     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.