概率语言多属性群决策方法及其在新型智慧城市市民获得感评价中的应用

针对公众参与的语言信息多属性群决策问题，研究了考虑参与者满意度的概率语言多属性群决策方法。首先，根据参与者的语言评价信息确定并规范化概率语言决策矩阵。然后，对大群体进行共识分析，由最大化参与者群体的满意度构建线性规划模型，确定参与者群组的权重；构造正、负理想方案的评价向量，构建多目标规划模型，用拉格朗日乘子法求解属性权重；定义各方案的加权贴近度，并以此对方案进行排序和优选。最后，通过新型智慧城市市民获得感评价案例验证了模型的可行性和有效性。     

Highly stable dielectric frequency response of chemically synthesized Mn-substituted ZnFe2O4

The tenacity of the present study was to develop a material using an economical chemical route, having balance between magnetic and dielectric order parameters for maximum transmittance of electromagnetic waves in order to use them in shielding materials. In this context, Mn-Zn ferrites were prepared using a wet chemical based sol-gel auto-combustion technique. X-ray diffraction confirmed the pure phase formation of samples, while some impurity peaks were also present for the higher value of Mn substitution. Field emission scanning electron microscopy revealed a decrease in grain size with increasing Mn substitution. While energy dispersive X-ray spectroscopy confirmed the elemental composition of pure and Mn substituted samples, the dielectric constant, dielectric loss and tangent loss were decreased with increasing frequency and increasing Mn substitution. The complex electric modulus was found to be a function of frequency and values of complex electric modulus were increased with increasing frequency and Mn substitution. The complex impedance of RC series circuit and RC parallel circuit was also decreased with increasing both the parameters while AC conductivity was increased in the series. Dielectric frequency response was also studied for the prepared samples and the best match was found with expected results. The Nyquist and Cole-Cole plots revealed the semi-conductive behavior at higher frequency and Mn substitution also yielded the same results. The relative stability of the samples to be used as dielectric materials was also studied using Bode and Nichols plots, and a comparatively high gain margin was observed, well suitable for potential applications in electromagnetic shielding.     

Analytical formulas for complex permittivity of periodic composites. Estimation of gain and loss enhancement in active and passive composites

ABSTRACT

The asymptotic homogenization method is applied to complex dielectric periodic composites. An equivalence to coupled dielectric problems with real coefficients is shown. This is similar to a piezoelectric problem: an out-plane mechanical displacement and an in-plane electric potential establishing a correspondence principle. Closed-form formulas for the complex dielectric effective tensor in the case of a square array of circular inclusions embedded in a matrix are given. These formulas are written in terms of a real and symmetric matrix which facilitates the implementation of the computational scheme. We also get similar formulas for multilayered complex dielectric composites. The real closed-form formulas are advantageous for estimating gain and loss enhancement properties of active and passive composites in certain volume fraction intervals. Numerical computations are performed and the results are compared with other approaches showing the usefulness of the obtained formulas. This may be of interest in the context of metamaterials.     

Monodisperse Six-Armed Starbursts based on Truxene-Cored Multibranched Oligofluorenes: Design,Synthesis, and Stabilized Lasing Characteristics

A series of monodisperse six-armed conjugated starbursts ( Tr1F , Tr2F , and Tr3F ) containing a truxene core and multibranched oligofluorene bridges capped with diphenylamine (DPA) units has been designed, synthesized, and investigated as robust gain media for organic semiconductor lasers (OSLs). The influence of electron-rich DPA end groups on their optoelectronic characteristics has been discussed at length. DPA cappers effectively raise HOMO levels of the starbursts, thus enhancing the hole injection and transport ability. Solution-processed electroluminescence devices based on the resulting six-armed starbursts exhibited efficient deep-blue electroluminescence with clear reduced turn-on voltages (3.2–3.5 V). Moreover, the resulting six-armed molecules showed stabilized electroluminescence and amplified spontaneous emission with low thresholds (27.4–63.9 nJ pulse⁻¹), high net gain coefficients (80.1–101.3 cm⁻¹), and small optical loss (2.6–4.4 cm⁻¹). Distributed feedback OSLs made from Tr3F exhibited a low lasing threshold of 0.31 kW cm⁻² (at 465 nm). The results suggest that the construction of truxene-centered six-armed conjugated starbursts with the incorporation of DPA units can effectively enhance EL properties by precisely regulating the HOMO energy levels, and further optimizing their optical gain properties.     

不断向自然与金属冶金学习的高分子加工

总结了高分子材料加工的发展趋势及发展历程,并指出过去很多加工新技术的出现都得益于从自然现象及其他材料行业中获得很好的借鉴,如从蜘蛛吐丝发展出溶液纺丝成型、从玻璃吹制发展出吹塑成型、从金属锻造发展出压延成型及固相拉拔成型等;随后针对生物基可生物降解的立构复合型聚乳酸难以采用传统熔融加工方法成型的问题,借鉴金属粉末冶金加工的思路,提出了一种通过低温烧结制备高性能立构复合型聚乳酸制品的新方法.通过这种加工方法不仅可以有效解决立构复合型聚乳酸在熔融加工过程中熔体稳定性差、易降解的问题,而且可以制得耐热性好、光学透明度高、耐水解降解性佳、综合力学性能优异的高性能聚乳酸制品.     

Discrimination of crude and processed rhubarb products using a chemometric approach based on ultra fast liquid chromatography with ion trap/time‐of‐flight mass spectrometry

Crude rhubarb subjected to different processing procedures will produce different therapeutic effects that are possibly due to processing‐induced variation in chemical composition. In this study, a chemometric approach based on ultra fast liquid chromatography with ion trap/time‐of‐flight mass spectrometry was established to systematically investigate the chemical variations of rhubarb induced by different processing methods. The approach was validated based on pooled quality‐control samples from two perspectives: the individual properties of variables and the bulk properties of samples. Orthogonal partial least squares discriminant analysis was introduced to compare the differences between crude and processed rhubarb products. A total of 20 significantly different markers were screened out and unambiguously/tentatively characterized. This research proved that a chemometric method based on ultra fast liquid chromatography with ion trap/time‐of‐flight mass spectrometry can comprehensively analyze the chemical variation of herbal medicine and provide evidence for a deeper understanding of the pharmacological activities of processed rhubarb products.     

Effect of synthesis parameters on the structural,morphological characteristics,and photocatalytic activity of La2O3 nanoparticles

This study investigates the influence of synthesis processes such as sonication, sol-gel, and microwave on the production of highly crystalline Lanthanum oxide nanoparticles (La₂O₃) employing Lanthanum nitrate and Ammonium hydroxide (NH₄OH) as precursors. X-ray diffraction (XRD), particle size analysis (DLS), Field emission scanning electron microscopy (FESEM), Fourier-transform infrared spectroscopy (FTIR), ultraviolet–visible absorption spectroscopy (UV–Vis), and electrochemical impedance spectroscopy (EIS) were used to examine the most effective processing method and its effects on the nanoparticle characteristics, such as structure, morphology, and optical and electrical behavior. Sonication produces La₂O₃ NPs with a smaller crystalline size, an agglomerated nanorod structure, a higher bandgap, and better electrical responsiveness than sol-gel and microwave techniques. Structural and optical characterization tests discovered this. The photocatalytic degradation activity of cationic Safranin and anionic Congo red dye exhibits degradation efficiency of around 90.13% and 89.66%, respectively.     

A Universal equipment for biaxial stretching of polymer films

A biaxial stretching equipment was designed and constructed to enable fundamental studies of the relationship between film processing conditions and structures of oriented film products. With programmable drive motors and scissorlike mechanism, all stretching modes, including uniaxial stretching with constant and free width, simultaneous and sequential biaxial stretching, can be applied to a square-shaped sheet. Parameters related to film stretching manufacturing, such as temperature, draw ratio and stretching speed can be set independently to meet the requirement of different polymers. The force information during stretching is recorded by two miniature tension sensors in two directions independently, which can monitor the mechanical stimulus and stress response. Using this equipment, experiments are conducted to investigate the influence of stretching parameters on the structure of polypropylene films, which provides an effective method to tailor the processing conditions to obtain the films with desired properties.     

便携式无线人体脂肪率测量仪的设计

生物电阻抗法(BIA)是一种安全非侵入式的、结果可靠有效的人体组成成分(脂肪含量)测量方法。以此为原理,设计了一款便携式无线人体脂肪率测量仪。硬件上,系统以高集成化、低功耗的阻抗测量芯片AD5933为核心,通过蓝牙实现与上位机的无线通信,大大降低了设备的复杂度。软件部分提出一种单频点小阻抗范围的增益系数校准方式,计算量小且容易实现。将新测量仪和欧姆龙体脂仪HBF-358进行对比实验,并作Bland-Altman一致性分析。结果表明,二者的相关系数为0.997。此外,该测量仪还具有易操作、小型化的特点。     

双通道高速数据采集处理平台的设计与实现

为满足数字式测向接收机对高速数据采集和处理的需求,研制了高速数据采集处理平台,该平台基于ADC12D1800RF模数转换器实现了两路1.35GHz中频信号的带通采样,以Xilinx公司V7系列FPGA为数据处理器,采用高速DDR3作为存储设备解决了海量数据存储问题,并通过高速串行接口（GTX/SRIO）实现了大容量数据的实时传输。该平台的测试结果为：1.8GHz采样率时有效位数大于8bit,DDR3存储器的工作主频可达1333MHz,GTX接口在10Gbps速率下工作时,其误码率小于10-9,上述测试结果表明该平台可以高速、准确地实现信号采集、数据传输、存储和处理,达到了预期设计目标。