基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

无重叠图像期间的卫星平台颤振估计算法

提出了基于双重约束函数的无重叠图像期间的颤振估计算法。建立了视差图像与低频颤振相结合的双重约束函数,以评价无重叠图像期间颤振曲线的平滑度;采用共轭梯度法筛选颤振曲线平滑度最优解,并以此作为无重叠图像期间颤振的最佳估计;建立了无重叠图像期间与重叠图像期间颤振之间的函数关系式。以我国XX-1号可见光详查相机为例进行实验,颤振探测结果在被测颤振的频率既不等于也不接近特征频率的整数倍处具备有效性,证明了所提算法能够对无重叠图像期间非特征频率整数倍及其附近处的颤振进行有效探测。     

线电荷与带有垂直脊的接地平行导体板所形成的电场及其数值模拟

将保角变换和平面镜像法相结合,求解线电荷与带有低脊的接地平行导体板所形成的电场,讨论几种特殊情形,并利用数学软件MATLAB对场分布进行数值模拟.     

AlGaN/GaN高电子迁移率器件外部边缘电容的物理模型

AlGaN/GaN HEMT外部边缘电容Cofd是由栅极垂直侧壁与二维电子气水平壁之间的电场构成的等效电容.本文基于保角映射法对Cofd进行物理建模,考虑沟道长度调制效应,研究外部偏置、阈值电压漂移和温度变化对Cofd的影响:随着漏源偏压从零开始增加,Cofd先保持不变再开始衰减,其衰减速率随栅源偏压的增加而减缓;AlGaN势垒层中施主杂质浓度的减小和Al组分的减小都可引起阈值电压的正向漂移,正向阈值漂移会加强沟道长度调制效应对Cofd的影响,导致Cofd呈线性衰减.在大漏极偏压工作情况下,Cofd对器件工作温度的变化更加敏感.     

利用速度图像巧解方波电场问题

对有关带电粒子以初速度垂直于电场方向进入方波电场的曲线运动问题进行分析和拓展,探究这类疑难问题巧妙的解答方法.     

几个有趣的课堂引入小实验

物理教学实践表明,采用新颖的、趣味的、生动的、富有悬念的、参与性的实验有利于学生萌发热爱物理学的情感,产生强烈的求知欲.笔者尝试制作了“神奇的滤音电路”“神秘的光电实验”“有趣的电磁琴”“微安表的秘密”等作为新授课的引入实验,取得了不错的教学效果.     

湍流大气传输中跟踪抖动对远场影响的仿真研究

分析了跟踪抖动对湍流大气传输远场光斑的影响。基于麦克斯韦电磁场理论,采用大气相干长度对大气湍流进行描述,推导了发射光束因跟踪抖动导致光轴偏离的远场表达式。在此基础上,利用相位屏法模拟抖动引起的倾斜相位和大气折射率起伏引起的相位调制,并采用低频补偿的功率谱反演法对传输过程进行了数值仿真。分析了不同跟踪抖动、湍流强度条件下远场光斑质心脱靶量的变化,以及不同尺寸模拟目标的回波概率。分析结果表明,在传输距离为10 km时,强湍流造成的远场光斑脱靶量可达几十μrad;当跟踪抖动较大时,湍流强弱对脱靶量影响差别很小。最后,对一定尺寸的模拟目标,从探测回波概率的角度给出了发射系统跟踪抖动量的控制范围。     

一种脉冲强电流条件下导线电阻测量方法

在超强激光辐照电容线圈靶产生强磁场实验中,在约50 ps时,线圈电流达到20 kA以上。通过该实验结果与磁场产生理论模型对比,可得出该导线电阻值比常温直流电阻高出3个量级。对导线材料电阻率与趋肤效应的分析结果表明,该电阻值在量级上是合理的。获得超快脉冲强电流条件下的导线电阻值,有助于更深入理解线圈靶产生强磁场过程。     

高温超导无绝缘线圈励磁电压特性研究

本文通过实验研究了焊锡浸渍、励磁电流PI控制、励磁速率以及励磁幅值对高温超导无绝缘线圈励磁电压特性的影响。实验结果表明:高温超导无绝缘线圈励磁电压具有时延特性,焊锡浸渍、励磁电流PI控制分别会增大和减小时延特性,而励磁速率和励磁幅值不会影响时延特性;励磁电压幅值随励磁速率增大而增大;焊锡浸渍可降低励磁电压幅值,而励磁电流控制对励磁电压幅值影响不明显。