近紫外光激发下KBaGd(MoO_(4))_(3)∶Er^(3+)的下转换发光及温度传感特性EI北大核心CSCD

近年来,Er^(3+)离子掺杂的无机发光材料被广泛应用于温度传感材料的研究。本文采用溶胶⁃凝胶法制备了Er^(3+)掺杂的KBaGd(MoO_(4))_(3)荧光粉,利用常温激发和发射光谱、荧光衰减曲线以及变温发射光谱对其光谱性能以及温度传感特性进行了分析。荧光光谱表明,KBaGd(MoO_(4))_(3)∶Er^(3+)在380 nm处有着较强的吸收峰,源自于Er^(3+)离子的4I_(15/2)→4G_(11/2)吸收跃迁。在近紫外光激发下,KBaGd(MoO_(4))_(3)∶Er^(3+)荧光粉在520~570 nm之间具有两个明亮的绿色发射。由于电偶极间相互作用,当Er^(3+)离子掺杂浓度超过8%时,样品发光开始出现浓度猝灭。基于荧光强度比(FIR)模型计算得到KBaGd(MoO_(4))_(3)∶Er^(3+)的相对灵敏度优于已报道的大部分同类温度传感材料,因此在光温传感领域有着更好的应用潜力。最后,对利用KBaGd(MoO_(4))_(3)∶Er^(3+)设计的LED进行了光电参数测试,并对其在照明领域的应用进行了客观评价。     

Enhanced thermoelectric performance of PEDOT:PSS films via ionic liquid post-treatment

Thermoelectric(TE)energy harvesting can effectively convert waste heat into electricity,which is a crucial technology to solve energy concerns.As a promising candidate for energy conversion,poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)has gained significant attention owing to its easy doping,high transparency,and solution processability.However,the TE performance of PEDOT:PSS still needs to be further enhanced.Herein,different approaches have been applied for tuning the TE properties:(i)direct dipping PEDOT:PSS thin films in ionic liquid;(ii)post-treatment of the films with concentrated sulfuric acid(H₂SO₄),and then dipping in ionic liquid.Besides,the same bis(trifluoromethanesulfonyl)amide(TFSI)anion and different cation salts,including 1-ethyl-3-methylimidazolium(EMIM+)and lithium(Li+),are selected to study the influence of varying cation types on the TE properties of PEDOT:PSS.The Seebeck coefficient and electrical conductivity of the PEDOT:PSS film treated with H2SO4EMIM:TFSI increase simultaneously,and the resulting maximum power factor is 46.7μW·m^-1·K^-2,which may be attributed to the ionic liquid facilitating the rearrangement of the molecular chain of PEDOT.The work provides a reference for the development of organic films with high TE properties.     

X-ray emission for Ar11+ ions impacting on various targets in the collisions near the Bohr velocity

X-ray emission from the collisions of 3 MeV Ar¹¹⁺ ions with V, Fe, Co, Ni, Cu, and Zn is investigated. Both the x-rays of the target atom and projectile are observed simultaneously. The x-ray yield is extracted from the original count. The inner-shell ionization cross section is estimated by the binary encounter approximation model and compared with the experimental result. The remarkable result is that the Ar K-shell x-ray yield is diminished with the target atomic number increasing, which is completely opposite to the theoretical calculation. That is interpreted by the competitive consumption of the energy loss for the ionization of inner-shell electrons between the projectile and target atom.     

好的问题并渐次呈现:教学设计的两个关键--从教学设计的“三二一”说起

一、从教学设计的“三二一”说起近读《章建跃数学教育随想录(下卷)》,章建跃博士关于“搞好教学设计,提高教学质量”的论述中提出教学设计的“三二一”,即三个基本点(理解数学、理解学生、理解教学),两个关键(提好的问题、设计自然的过程),一个核心(设计概括过程).     

硫氰酸酯类化合物的合成及其应用研究进展

硫氰酸酯类化合物(RSCN)作为重要的合成中间体,在农药、医药、材料等领域有着广泛的应用价值.近年来,硫氰酸酯的合成及其应用研究发展迅速,不断有新的硫氰酸酯合成方法和以其为原料的转化反应涌现.综述了近几年来发展的硫氰酸酯合成方法及其转化应用,为硫氰酸酯类化合物的合成和应用研究提供帮助.     

硫化丁苯橡胶纳观界面耐磨机理及参数影响分析

硫化橡胶因其良好的力学和物理化学性能而被广泛作为摩擦副的基础材料. 本文提出了一种硫化交联算法, 实现了C—C键的硫化互交联和自交联, 构建了硫化丁苯橡胶的分子动力学磨损模型, 从微观摩擦学的角度阐明了硫化交联结构对改善丁苯橡胶磨损性能的机理, 研究了不同界面参数对硫化橡胶微观磨损性能的影响. 结果发现 硫化使丁苯橡胶分子链的界面黏附能力和活动能力更弱, 拉伸和解缠能力更低, 磨损过程中界面累积能量更低, 更不容易脱离橡胶基体, 因此可以表现出更好的摩擦学性能, 更强的抗磨损性能; 随着速度的增大, 硫化橡胶的磨损率降低, 与宏观实验结果一致, 原因是硫化橡胶的原子分布函数和相互作用能随着速度增大而降低, 说明橡胶分子链的黏附能力和活动能力随着速度增加趋弱, 温升更低, 导致较低的磨损率; 压入深度对磨损率的影响规律则呈现相反的结果和趋势.