金属衬底在石墨烯化学气相沉积生长中的作用

以过渡金属为催化衬底的化学气相沉积法(Chemical Vapor Deposition，CVD)已经可以制备与机械剥离样品相媲美的石墨烯，是实现石墨烯工业应用的关键技术之一。原子尺度理论研究能够帮助我们深刻理解石墨烯生长机理，为实验现象提供合理的解释，并有可能成为将来实验设计的理论指导。本文从理论计算的角度，总结了各种金属衬底在石墨烯CVD生长过程中的各种作用与相应的机理，包括在催化碳源裂解、降低石墨烯成核密度等，催化加快石墨烯快速生长，修复石墨烯生长过程中产生的缺陷，控制外延生长石墨烯的晶格取向，以及在降温过程中石墨烯褶皱与金属表面台阶束的形成过程等。在本文最后，我们对当前石墨烯生长领域中亟需解决的理论问题进行了深入探讨与展望。     

LaNi0.5Co0.5O3催化剂对甲烷二氧化碳干重整反应在CO2渗透膜反应器中的影响

制备了混合导体膜反应器,通过电化学方法捕获CO2,并将其用于甲烷二氧化碳干重整反应中.采用XRD, SEM,TPR等技术系统研究了LaNi0.5Co0.5O3催化剂在膜反应器中对甲烷二氧化碳干重整反应的影响.结果表明:LaNi0.5Co0.5O3催化剂在甲烷干重整反应中能原位析出纳米金属Ni和Co,对反应起到了较好的催化作用,同时抑制了积碳.催化剂还具有良好的氧化还原性能,可以循环利用.     

The metabolites and biotransformation pathways in vivo after oral administration of ocotillol,RT5, and PF11

Ocotillol, pseudo-ginsenoside RT5 (RT₅), and pseudo-ginsenoside F₁₁ (PF₁₁) are ocotillol-type saponins that have the same aglycone structure but with different numbers of glucose at the C-6 position. In this study, the metabolites of ocotillol, RT₅, and PF₁₁ in rat plasma, stomach, intestine, urine, and feces after oral administration were investigated by ultra-performance liquid chromatography coupled with time-of-flight mass spectrometry. The results showed that RT₅ was easily biotransformed into metabolites in vivo, whereas PF₁₁ and RT₅ were difficult to be biotransformed. Hydrogenation, dehydrogenation, dehydration, deglycosylation, deoxygenation, hydration, phosphorylation, deoxidation, glucuronidation, and reactions combining amino acid were speculated to be involved in the biotransformation of ocotillol, RT₅, and PF₁₁. Based on the structural analysis of metabolites, it was deduced that hydrogenation, dehydration, deoxidation, and reactions combining amino acid occurred on the aglycone structure, whereas deglycosylation, hydration, and phosphorylation occurred on the glycosyl chain. Further, metabolites in plasma, urine, feces, and tissues were different: First, glucuronidation products were found in urine, stomach, intestine, and feces, but not in plasma. Second, the ocotillol prototype was not identified in urine samples. Third, the RT₅ prototype was found in stomach, intestine, feces, and urine, but not in plasma.     

Parameter Estimation Based on Set-valued Signals: Theory and Application

Acta Mathematicae Applicatae Sinica, English Series - This paper summarizes the parameter estimation of systems with set-valued signals, which can be classified to three catalogs: one-time...     

次线性期望下的一般中心极限定理

受Peng-中心极限定理的启发,本文主要应用G-正态分布的概念,放宽Peng-中心极限定理的条件,在次线性期望下得到形式更为一般的中心极限定理.首先,将均值条件E[X_n]=ε[X_n]=0放宽为|E[X_n]|+|ε[X_n]|=O(1/n);其次,应用随机变量截断的方法,放宽随机变量的2阶矩与2+δ阶矩条件;最后,将该定理的Peng-独立性条件进行放宽,得到卷积独立随机变量的中心极限定理.     

TFSI钝化晶体硅表面性质的第一性原理研究

晶体硅表面钝化是高效率晶体硅太阳能电池的核心技术,直接影响晶体硅器件的性能。本文采用第一性原理方法研究了一种超强酸-双三氟甲基磺酰亚胺(TFSI)钝化晶体硅(001)表面。研究发现,TFSI的四氧原子结构能够与Si(001)表面Si原子有效成键,吸附能达到-5.124 eV。电子局域函数研究表明,TFSI的O原子与晶体硅表面的Si的成键类型为金属键。由态密度和电荷差分密度分析可知,Si表面原子的电子向TFSI转移,从而有效降低了Si表面的电子复合中心,有利于提高晶体硅的少子寿命。Bader电荷显示,伴随着TFSI钝化晶体硅表面的Si原子,表面Si原子电荷电量减少,而TFSI中的O原子和S原子电荷电量相应增加,进一步证明了TFSI钝化Si表面后的电子转移。该工作为第一性原理方法预测有机强酸钝化晶体硅表面的钝化效果提供了数据支撑。     

化妆品中的肽化学*

随着科技进步和产业提升,人们不断从本源上追求美、从长效上保持美、从机制上激发美。众多肽类化合物,已被证实在人体内具有独特的生物学促进或抑制作用,也因此被广泛应用于美妆产品。以化妆品中生物活性肽的不同功效为主线,对其化学结构进行分析并阐述其中的生理作用机制。     

A survey on book-embedding of planar graphs

The book-embedding problem arises in several area, such as very large scale integration (VLSI) design and routing multilayer printed circuit boards (PCBs). It can be used into various practical application fields. A book embedding of a graph G is an embedding of its vertices along the spine of a book, and an embedding of its edges to the pages such that edges embedded on the same page do not intersect. The minimum number of pages in which a graph G can be embedded is called the pagenumber or book-thickness of the graph G. It is an important measure of the quality for book-embedding. It is NP-hard to research the pagenumber of book-embedding for a graph G. This paper summarizes the studies on the book-embedding of planar graphs in recent years.     

级联光栅结合Sagnac环的可调谐光纤激光器

提出并验证了一种单-双波长可调谐掺铒光纤激光器。利用级联光纤布拉格光栅(Cascaded Fiber Bragg gratings,Cascaded FBGs)结合Sagnac环结构所产生的复合滤波效应,实现较高精细度滤波,并通过调节环内偏振控制器(Polarization Controller,PC),引入双折射效应,得到波长可调谐的光纤激光器。基于耦合模理论并使用传输矩阵法对该结构的传输特性进行了分析,在此基础上搭建实验系统,验证了理论分析的正确性。实验结果表明:通过调节PC,激光器输出激光的波长范围约为1 555.644～1 556.112 nm,双波长间隔的可调范围约为0.108～0.452 nm,单-双波长的边模抑制比(SMSR)均高于40 dB;在稳定性测试中,输出单-双波长激光的波长最大漂移量小于0.008 nm。该方法具有结构简单、调谐方便、易于实现且精细度较高的优点,可应用于密集波分复用及全光通信系统等领域。     

SrTiO3/Mg6Ti5O16复合陶瓷的微波介电性能研究

通过传统固相烧结法制备了xSrTiO3-(1-x)Mg6Ti5O16微波介质陶瓷,并研究其晶体结构、显微结构及微波介电性能.xSrTiO3-(1-x)Mg6Ti5O16复合陶瓷主要含有MgTiO3、SrTiO3和Mg6Ti5O16三相;复合陶瓷晶粒分布紧密,尺寸大小不均匀;适当增加SrTiO3含量可以有效提高介电常数和品质因数,并使谐振频率温度系数趋于正值.1420 ℃烧结的3.8;SrTiO3-96.2;Mg6Ti5O16复合微波陶瓷可获得最佳微波介电性能:εr=17, Q×f =42729 GHz和τf=5 ppm/℃.