Synthesis of nano‐sized magnetite mesoporous carbon for removal of Reactive Yellow dye from aqueous solutions

In this study, core‐shell structures of magnetite nanoparticles coated with CMK‐8 ordered mesoporous carbon (Fe₃O₄@SiO₂‐CMK‐8 NPs) have been successfully synthesized for the first time by carbonizing sucrose inside the pores of the Kit‐6 mesoporous silica. The nano‐sized mesoporous particles were characterized by X‐ray diffraction, Fourier transform‐infrared spectroscopy, scanning electron microscope, dynamic light scattering, vibrating‐sample magnetometer, Brunauer–Emmett–Teller (BET) and transmission electron microscopy instruments. The obtained nanocomposite was used for removal of Reactive Yellow 160 (RY 160) dye from aqueous samples. The N₂ adsorption–desorption method (at 77 K) confirmed the mesoporous structure of synthesized Fe₃O₄@SiO₂‐CMK‐8 NPs. Also, the surface area was calculated by the BET method and Langmuir plot as 276.84 m²/g and 352.32 m²/g, respectively. The surface area, volume and pore diameter of synthesized nanoparticles (NPs) were calculated from the pore size distribution curves using the Barrett–Joyner–Halenda formula (BJH). To obtain the optimum experimental variables, the effect of various experimental parameters on the dye removal efficiency was studied using Taguchi orthogonal array experimental design method. According to the experimental results, about 90.0% of RY 160 was removed from aqueous solutions at the adsorbent amount of 0.06 g, pH 3 and ionic strength = 0.05 m during 10 min. The pseudo‐second order kinetic model provided a very good fit for the RY 160 dye removal (R² = 0.999). The Langmuir, Freundlich, Temkin and Dubinin–Radushkevich models were applied to describe the equilibrium isotherms, and the Langmuir isotherm showed the best fit to data with the maximum adsorption capacity of 62.893 mg/g. Furthermore, the Fe₃O₄@SiO₂‐CMK‐8 NPs could be simply recovered by external magnet, and exhibited recyclability and reusability for a subsequent six runs.     

Fabrication of red-emitting CaAlSiN3: Eu2+ through phosphor-in-glass approach for application in rear combination lamp

In this study, the red-emitting phosphor-in-glass (PiG) using the CaAlSiN₃: Eu²⁺ (CASN) phosphor is reported for the first time. The CASN: Eu²⁺ PiG samples with a maximum luminous flux of 25.1–29.4 for l minute at laser power of 1 W/mm² was obtained using a low-temperature glass frit and GPS furnace. Despite the increase in the phosphor from 15 to 25 wt%, the PiG produced at low temperature of 380 °C showed robust properties. Finally, the red PiG module designed for rear lamp applications maintains over 90% lumens for a minute at 350 mA and achieves an intense red light having a color temperature of 4589 K.     

不同晶体结构Gd2(MoO4)3:Eu3+荧光粉的合成及其发光性能研究

采用溶胶凝胶-燃烧法,柠檬酸为络合剂合成出系列Gd₂(MoO₄)₃:Eu³⁺荧光粉.利用X射线衍射(XRD)、扫描电子显微镜(SEM)和荧光光谱对样品的结构、形貌和发光性能进行了研究.XRD分析表明:稀土离子与柠檬酸为1:0.5时,800℃热处理获得单斜结构的Gd₂(MoO₄)₃:Eu³⁺荧光粉.单斜结构的Gd₂(MoO₄)₃:Eu³⁺荧光粉到正交结构的Gd₂(MoO₄)₃:Eu³⁺荧光粉的转换可以通过改变稀土离子与柠檬酸摩尔比和热处理温度等合成条件实现.Gd₂(MoO₄)₃:Eu³⁺荧光粉的形貌受合成条件的影响.荧光光谱研究表明:Gd₂(MoO₄)₃:Eu³⁺荧光粉的主发射峰位于616 nm处来自于Eu³⁺的⁵D₀→⁷F₂电偶极跃迁.正交结构的Gd₂(MoO₄)₃:Eu³⁺荧光粉发射强度明显高于单斜结构的荧光粉.计算⁵D₀→⁷F₂与⁵D₀→⁷F₁跃迁发射的相对强度比值表明:正交结构的Gd₂(MoO₄)₃:Eu³⁺中Eu³⁺局域环境的对称性较高。     

CaLuBO4∶Tb^3+荧光粉的制备及发光性质

采用高温固相反应法合成了不同Tb^3+掺杂浓度的CaLuBO4∶xTb^3+荧光粉,研究了样品的晶体结构和发光性质。在紫外光激发下,样品的发射光谱由Tb3+离子的5D3→7FJ(J=6,5,4)和5D4→7FJ′(J′=6,5,4,3)特征发射组成,其中位于545 nm和554 nm附近的5D4→7F5跃迁发射强度最大。荧光粉的激发光谱是由位于紫外区的Tb3+的4f-5d和f-f跃迁构成的。研究了Tb3+浓度对样品发光性质的影响。测量并分析了CaLuBO4∶xTb^3+荧光粉的5D3能级和5D4能级荧光寿命。结果表明,CaLuBO4∶xTb^3+是一种适于紫外激发的新型黄绿光荧光粉。     

Physical,Thermal and Biological Properties of Yellow Dyes with Two Azodiphenylether Groups of Anthracene

Two yellow bis-azo dyes containing anthracene and two azodiphenylether groups (BPA and BTA) were prepared, and an extensive investigation of their physical, thermal and biological properties was carried out. The chemical structure was confirmed by the FTIR spectra, while from the UV–Vis spectra, the quantum efficiency of the laser fluorescence at the 476.5 nm was determined to be 0.33 (BPA) and 0.50 (BTA). The possible transitions between the energy levels of the electrons of the chemical elements were established, identifying the energies and the electronic configurations of the levels of transition. Both crystals are anisotropic, the optical phenomenon of double refraction of polarized light (birefringence) taking place. Images of maximum illumination and extinction were recorded when the crystals of the bis-azo compounds rotated by 90° each, which confirms their birefringence. A morphologic study of the thin films deposited onto glass surfaces was performed, proving the good adhesion of both dyes. By thermal analysis and calorimetry, the melting temperatures were determined (~224–225 °C for both of them), as well as their decomposition pathways and thermal effects (enthalpy variations during undergoing processes); thus, good thermal stability was exhibited. The interaction of the two compounds with collagen in the suede was studied, as well as their antioxidant activity, advocating for good chemical stability and potential to be safely used as coloring agents in the food industry.     

Fabrication and luminous properties of phosphor ceramic for application in automotive laser headlight

We report on the optimization of fabrication of a ceramic phosphor plate (CPP) using α-Al₂O₃ as functional materials for an automotive laser headlamp. The prepared CPP shows the high luminous characteristics with increasing α-Al₂O₃ contents because of the light scattering of the hexagonal structure of α-Al₂O₃ materials. We investigated the correlation between α-Al₂O₃ and thickness of CPP. The luminous properties of the CPP are improved and optimized according to the variables of one. We found that the prepared sample is a potential material for future solid-state laser lighting in application as an automotive headlamp.     

近紫外激发Gd2ZnTiO6∶Eu3+,Li+红色荧光粉的制备及荧光性能

采用溶胶-凝胶法成功制备出系列Eu³⁺掺杂和Li⁺、Eu³⁺共掺杂Gd₂ZnTiO₆红色荧光粉,并研究Li⁺、Eu³⁺掺杂对样品的晶体结构、微观形貌及发光性能的影响。结果显示,所制备的Gd₂ZnTiO₆∶Eu³⁺,Li⁺(GZT∶Eu³⁺,Li⁺) 荧光粉为双钙钛矿结构,属于单斜晶系(空间群:P2₁/n),大小为10 μm的无规则形状的颗粒。在395 nm近紫外光的激发下,GZT∶Eu³⁺的发射光谱展示出典型的Eu³⁺线状特征光谱,发射峰中心位于615 nm处,归属于Eu³⁺的⁵D₀→⁷F₂跃迁。Eu³⁺的最佳掺杂浓度为0.07(摩尔分数),样品显示明显的浓度猝灭效应,其机制为电偶极子-电偶极子(d-d)相互作用。此外,研究还发现,Li⁺掺杂对样品的晶体结构、微观形貌没有影响,但是一定量的Li⁺掺杂可以显著增强样品的荧光强度。当Li⁺浓度为0.05时,荧光粉发射主峰强度增强程度最大,提高至原来的4.3倍,说明通过Li⁺、Eu³⁺共掺杂可以获得高亮度的GZT红色荧光粉。GZT∶0.14Eu³⁺,0.05Li⁺荧光粉的CIE色坐标为(0.631 1,0.375 3)与标准红光色坐标(0.670,0.330)较为接近,是一种潜在的LED用红色荧光粉。     

Praseodymium Doped Dysprosium Oxide-carbon Nanofibers Based Voltammetric Platform for the Simultaneous Determination of Sunset Yellow and Tartrazine

A platform based on praseodymium doped dysprosium oxide-carbon nanofibers modified electrode was constructed for the simultaneous determination of SY and TAR. SEM, EDX and XRD techniques were utilized for characterizing the proposed material. The voltammetric behaviour and properties of SY and TAR were gradually improved at materials in order from CNFs to Dy₂O₃−CNFs and Pr₆O₁₁@Dy₂O₃−CNFs. The working range was found to be 1.0×10⁻⁹–3.5×10⁻⁸ M and 1.5×10⁻⁹–4.0×10⁻⁸ M for SY and TAR, respectively. The value of LOD was 3.12×10⁻¹⁰ M and 5.35×10⁻¹⁰ M for SY and TAR, respectively. The platform (Pr₆O₁₁@Dy₂O₃−CNFs/GCE) was successfully applied to the electroanalysis of samples.     

Effect of Direct yellow 50 removal from an aqueous solution using nano bentonite; adsorption isotherm,kinetic analysis and also thermodynamic behavior

The developing countries are suffering from the toxicity of different industrial effluents, especially dyes that contaminate water systems. This study successfully explained the preparation and characterization of nano bentonite to extract Direct Yellow Fifty (DY50). Direct Yellow 50 is an organic contaminant that may affect the quality of water. The characterization of prepared nanoparticles was done using Scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FTIR). The impact of different operating conditions was studied using different pH, dose, temperature, contact time, and initial DY50 concentrations. The obtained results indicated that nano bentonite could adsorb about 94 % at initial concentrations of 40 mg/L, respectively. The optimum removal conditions were observed at an acidic pH (pH 3) using a sorbent material dosage of 0.05 g for 4 h at 30 °C. The adsorption isotherm, kinetic analysis, and thermodynamic behavior were studied using linear equation form, and the adjusted R² was compared to detect the preferred models. The adsorption behavior pseudo-second order kinetics, and fitted Langmuir isotherm model, respectively, showed the chemisorption interactions between adsorbed and sorbed molecules. Thermodynamic behavior indicated that the reaction was exothermic. Finally, this study strongly recommended using nano bentonite for DY50 removal from an aqueous solution.     

喹啉黄中各组分的定性及定量研究

利用高效液相色谱(HPLC)对喹啉黄各组分进行分离并定量,通过液相色谱–串联质谱(LC–MS/MS)对各组分进行定性。以0.01 mol/L乙酸铵溶液和甲醇为流动相进行梯度洗脱,利用Agilent XDB–C18色谱柱对喹啉黄各组分进行分离,峰面积归一化法定量。质谱采用电喷雾负离子(ESI–)模式电离,多反应监测(MRM)模式检测,对喹啉黄各组分进行定性。结果表明,喹啉黄主要成分为喹啉黄一钠盐和喹啉黄二钠盐,分别各有两种同分异构体,各组分质量浓度在5.0~100.0μg/m L范围内与峰面积呈良好的线性关系。加标回收率为98.2%~99.1%,测定结果的相对标准偏差为0.90%~1.58%(n=6)。该方法具有良好的精密度和准确度,可用于喹啉黄中各组分的测定。