From superhydrophobic‐ to superhydrophilic‐patterned poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) architectures as a novel platform for biotechnological applications

The manufacture of three‐dimensional patterned electroactive poly(vinylidene fluoride‐co‐chlorotrifluoroethylene) microstructures with tailored architecture, morphology, and wettability is presented. The patterned microstructures are fabricated using a simple, effective, low cost, and reproducible technique based on microfluidic technology. These novel structures can represent innovative platforms for advanced strategies in a wide range of biotechnological applications, including tissue engineering, drug delivery, microfluidic, and sensors and actuators devices. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1802–1810     

Green solvent approach for printable large deformation thermoplastic elastomer based piezoresistive sensors and their suitability for biomedical applications

Composites based on biocompatible thermoplastic elastomer styrene‐ethylene/butylene‐styrene (SEBS) as matrix and multi‐walled carbon nanotubes (MWCNT) as nanofillers show excellent mechanical and piezoresistive properties from low to large deformations. The MWCNT/SEBS composites have been prepared following a green solvent approach, to extend their range of applicability to biomedical applications. The obtained composites with 2, 4, and 5 wt % MWCNT content provide suitable piezoresistive response up to 80% deformation with a piezoresistive sensibility near 2.7, depending on the applied strain and MWCNT content. Composite sensors were also developed by spray and screen printing and integrated with an electronic data acquisition system with RF communication. The possibility to accurately control the composites properties and performance by varying MWCNT content, viscosity, and mechanical properties of the polymer matrix, shows the large potential of the system for the development of large deformation printable piezoresistive sensors. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2092–2103     

Support points for families of univalent mappings on bounded symmetric domains

Science China Mathematics - In this paper, we study some extremal problems for the family $$S_g^0(\mathbb{B}_X)$$ of normalized univalent mappings with g-parametric representation on the unit ball...     

Physical,Thermal and Biological Properties of Yellow Dyes with Two Azodiphenylether Groups of Anthracene

Two yellow bis-azo dyes containing anthracene and two azodiphenylether groups (BPA and BTA) were prepared, and an extensive investigation of their physical, thermal and biological properties was carried out. The chemical structure was confirmed by the FTIR spectra, while from the UV–Vis spectra, the quantum efficiency of the laser fluorescence at the 476.5 nm was determined to be 0.33 (BPA) and 0.50 (BTA). The possible transitions between the energy levels of the electrons of the chemical elements were established, identifying the energies and the electronic configurations of the levels of transition. Both crystals are anisotropic, the optical phenomenon of double refraction of polarized light (birefringence) taking place. Images of maximum illumination and extinction were recorded when the crystals of the bis-azo compounds rotated by 90° each, which confirms their birefringence. A morphologic study of the thin films deposited onto glass surfaces was performed, proving the good adhesion of both dyes. By thermal analysis and calorimetry, the melting temperatures were determined (~224–225 °C for both of them), as well as their decomposition pathways and thermal effects (enthalpy variations during undergoing processes); thus, good thermal stability was exhibited. The interaction of the two compounds with collagen in the suede was studied, as well as their antioxidant activity, advocating for good chemical stability and potential to be safely used as coloring agents in the food industry.     

Synthesis,Characterization and Photocleavage of Bis-decyl Pteroic Acid: A Folate Derivative with Affinity to Biomembranes†

Here, we provide mechanistic insight to the photocleavage of a compound in the folate family, namely pteroic acid. A bis-decyl chain derivative of pteroic acid was synthesized, structurally characterized and photochemically investigated. We showed that, like folic acid, pteroic acid and the decylated derivative undergo a photocleavage reaction in the presence of H₂O, while no reaction was observed in methanol solution. Furthermore, density functional theory calculations were carried out to predict relative stabilities of hypothetical mono-, bis- and tris-decylated pteroic acid derivatives to help rationalize the regioselectivity of the bis-decyl pteroic acid product. Additionally, the lipophilicity of the bis-decyl pteroic acid appears to confer a hydrophobic property enabling an interaction with biomembranes.     

Antioxidant activity of rosemary extracts in solution and embedded in polymeric systems

The rosemary extract was encapsulated in polyethylene or in covalently-based network gels. The covalent gels were obtained by the reaction of isocyanate end-capped polyethylene glycol (PEG) with β-cyclodextrin or glycerol. The 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay was used to evaluate the antioxidant activity (AA) of rosemary extract entrapped in polymeric structures and in ethanol or water solutions. The AA of the rosemary extract was determined using a DPPH radical for samples prepared in ethanol, and a water-soluble derivative, the sulphonated DPPH radical (DPPH-SO₃Na), for the rosemary extract in water. Formulation of the rosemary extract in polymeric gels ensures a rapid release which determines the AA values similar to those in solution.     

Aptamer-based detection of thrombin by acoustic method using DNA tetrahedrons as immobilisation platform

The thickness shear mode acoustic method was used to study the binding of thrombin to DNA aptamers immobilised on the gold surface covered by DNA tetrahedrons. The binding of thrombin to conventional aptamers sensitive to fibrinogen (FBT) and heparin (HPT) exosites as well as to HPT in a loop configuration (HPTloop) made it possible to determine the constant of dissociation (K_D) and the limit of detection (LOD). The sensing system composed of a HPTloop was characterised by K_D = (66.7 ± 22.7) nM, which was almost twice as low as that of FBT and HPT. For this biosensor, a lower LOD of 5.2 nM compared with 17 nM for conventional HPT aptamers was also obtained. Less sensitive sensors based on FBT aptamers revealed an LOD of 30 nM which is in agreement with the lower affinity of these aptamers to thrombin in comparison with that of HPT. The surface concentration of DNA tetrahedrons was determined by the electrochemical method using [Ru(NH₃)₆]³⁺ as a redox probe. These experiments confirmed that the “step by step” method of forming the sensing layer, consisting first in chemisorption of DNA tetrahedrons onto a gold surface and then in hybridisation of the aptamer-supporting part with complementary oligos at the top of the tetrahedron, is preferable. In addition, atomic force microscopy was applied to analyse the topography of the gold layers modified stepwise by DNA tetrahedrons, DNA aptamers and thrombin. The height profiles of the layers were in reasonable agreement with the dimensions of the adsorbed molecules. The results indicate that DNA tetrahedrons represent an efficient platform for immobilisation of aptamers.     

Cocrystal Formation through Mechanochemistry: from Neat and Liquid‐Assisted Grinding to Polymer‐Assisted Grinding

Mechanochemistry is an effective method for the preparation of multicomponent crystal systems. In the present work, we propose an alternative to the established liquid‐assisted grinding (LAG) approach. Polymer‐assisted grinding (POLAG) is demonstrated to provide a new class of catalysts for improving reaction rate and increasing product diversity during mechanochemical cocrystallization reactions. We demonstrate that POLAG provides advantages comparable to the conventional liquid‐assisted process, whilst eliminating the risk of unwanted solvate formation as well as enabling control of resulting particle size. It represents a new approach for the development of functional materials through mechanochemistry, and possibly opens new routes toward the understanding of the mechanisms and pathways of mechanochemical cocrystal formation.