Acridone-Based Host Materials for Green Phosphorescent and Thermally Activated Delayed Fluorescent OLEDs with Low-Efficiency Roll-Offs

By linking the carbazole unit to the nitrogen atom of acridone through phenyl or pyridyl, two compounds, named 10-(4-(9H-carbazol-9-yl)phenyl)acridin-9(10H)-one (AC-Ph-Cz) and 10-(5-(9H-carbazol-9-yl)pyridin-2-yl)acridin-9(10H)-one (AC-Py-Cz) were designed and synthesized. These two materials, characterized with highly twisted and rigid structure, good thermal stability, and balanced carrier-transporting properties, were employed as host materials for green phosphorescent and thermally activated delayed fluorescent organic light-emitting diodes (OLEDs). The carbazole group, despite its small contribution to the highest occupied molecular orbitals (HOMOs) of these two materials, plays an essential role as an intramolecular host in energy delivering and improving the hole transporting ability of these two hosts. The incorporation of the electron-deficient pyridyl group as a linking group slightly improves the electron transporting capability of AC-Py-Cz. The green phosphorescent OLED (PhOLED) based on AC-Py-Cz exhibited excellent device performance with a turn-on voltage of 2.5 V, a maximum power efficiency and an external quantum efficiency (η_ext) of 89.8 lm W⁻¹ and 25.2 %, respectively, benefitting from the better charge-balancing ability of AC-Py-Cz host due to the presence of the pyridyl bridge. More importantly, all the devices based on these two hosts showed low efficiency roll-off at high brightness due to the suppressed non-radiative transition in the emitting layer. In particular, the AC-Py-Cz-hosted green PhOLED exhibited an efficiency roll-off of 1.6 % from the maximum next at a high brightness of 1000 cd m⁻² and a roll-off of 15.9 % at an extremely high brightness of 10000 cd m⁻². This study manifests that acridone-based host materials have great potential in fabricating OLEDs with low efficiency roll-off.     

Biosynthesis of zinc oxide nanoparticles using Euphorbia milii leaf constituents: Characterization and improved photocatalytic degradation of methylene blue dye under natural sunlight

A facile biosynthesis route was followed to prepare zinc oxide nanoparticles (ZnO NPs) using Euphorbia milii (E. milii) leaf constituents. The SEM images exhibited presence of spherical ZnO NPs and the corresponding TEM images disclosed monodisperse nature of the ZnO NPs with diameter ranges between 12 and 20 nm. The Brunauer–Emmett–Teller (BET) analysis revealed that the ZnO NPs have specific surface area of 20.46 m²/g with pore diameter of 2 nm–10 nm and pore volume of 0.908 cm³/g. The EDAX spectrum exemplified the existence of Zn and O elements and non-appearance of impurities that confirmed pristine nature of the ZnO NPs. The XRD pattern indicated crystalline peaks corresponding to hexagonal wurtzite structured ZnO with an average crystallite size of 16.11 nm. The FTIR spectrum displayed strong absorption bands at 512 and 534 cm^?1 related to ZnO. The photocatalytic action of ZnO NPs exhibited noteworthy degradation of methylene blue dye under natural sunlight illumination. The maximum degradation efficiency achieved was 98.17% at an illumination period of 50 min. The reusability study proved considerable photostability of the ZnO NPs during photocatalytic experiments. These findings suggest that the E. milii leaf constituents can be utilized as suitable biological source to synthesis ZnO NPs for photocatalytic applications.     

激光分子束外延方法生长的ZnO薄膜的发光特性

研究了不同温度和不同光激发强度下激光分子束外延方法生长的ZnO薄膜样品的发光性能,发现YAG脉冲激光激发,强度超过一定值时会在长波方向上出现一个新的发光峰,此峰可能起源于电子-空穴的复合。室温下氙灯激发的光谱中可以看到峰值位于381nm的近带边紫外发射峰和位于450nm的强的蓝绿带发射,根据光致发光激发光谱的特征给出了一个简单的蓝光发射模型。对比YAG脉冲激光激发和氙灯激发得到的实验光谱,我们认为不同的光谱特征和样品发光的激发机制有关,紫外峰发射需激发强度超过一定值才能观察到,而蓝带发射则在一定的激发强度下迅速饱和。     

ZnS作为空穴缓冲层的新型有机发光二极管

采用磁控溅射方法在ITO表面沉积了不同厚度的ZnS超薄膜作为有机发光二极管(OLEDs)的缓冲层,使典型结构(ITO/TPD/Alq3/Al)的OLEDs的发光性能得到改善。ZnS缓冲层厚度对器件性能影响的实验结果表明,当ZnS缓冲层厚度为5nm时,器件电流密度提高了近2倍,亮度提高了2倍;当ZnS缓冲层厚度为10nm时,器件发光的电流效率提高18%,器件的性能得到改善。宽禁带的ZnS缓冲层对空穴从阳极到有机功能层的注入有阻碍作用,促进器件载流子平衡,提高了器件发光效率,改善了器件性能。     

碱蓝6B共振光散射法检测DNA

研究了碱蓝 6B与脱氧核糖核酸在酸性条件下共振光散射特征 ,考察了影响因素和最佳反应条件 ,建立了一种测定纳克级DNA的方法。在四硼酸钠 盐酸 (pH =2 90 )缓冲溶液中 ,线性范围为 10～ 10 0 4 μg·L- 1 ,相关系数为 0 9913,检出限为 4 2 μg·L- 1 ,用于合成样品的测定结果令人满意。     

蓝光相变光盘的多层膜结构设计

为了使光盘获得优良的记录／读出性能并能够长期稳定地使用，必须优化设计相变光盘的多层膜结构。采用自行设计的模拟分析相变光盘读出过程设计软件，从光学角度出发模拟计算了蓝光(405nm)相变光盘的膜层结构，研究了多层膜系的反射率和反射率对比度等光学参量与各层膜厚度和槽深的关系。研究得出的最佳多层膜结构为：下介电层／记录层／上介电层／反射层的厚度对于台记录为100nm／10nm／25nm，／60nm，而对于槽记录则为140nm／15nm／30nm，／60nm，槽深为50nm。模拟计算结果对于将来高密度蓝光相变光盘的制备具有一定的指导意义。     

Energy transfer between the flavin chromophores of electron-transferring flavoprotein fromMegasphaera elsdenii as inferred from time-resolved red-edge and blue-edge fluorescence spectroscopy

Both a mode-locked argon-ion laser and synchrotron radiation were used as excitation sources to obtain time-resolved polarized fluorescence of the two FAD cofactors in electron transferring flavoprotein fromMegasphaera elsdenii. Red-edge excited and blue-edge detected fluorescence anisotropy decay curves did not contain a fast relaxation process which was observed upon mainband excitation and detection. This relaxation was assigned to homo-energy transfer between the two FAD cofactors. Failure of energy transfer as observed with edge spectroscopy on this protein excludes restricted reorientational motion of the flavins as a possible mechanism of depolarization. From the global analysis of the fluorescence anisotropy decay surface obtained at multiple excitation and detection wavelengths, the distance between and the relative orientation of the flavins could be estimated. The methodology described has general applicability in other multichromophoric biopolymers and has the potential to acquire accurate geometrical parameters in these systems.     

新型高色纯度弱电流猝灭性蓝色有机发光器件

以ADN为基质,分别以不同掺杂剂制备了四种蓝色有机发光器件,器件结构为:CuPc(12 nm)/NPB(40 nm)/AND∶Dopant(50 nm)/Alq(12 nm)/LiF(4 nm)/Al。掺杂剂有:BCzVB(amino-substituted distyrylarylenederivatives)、TBPe、BCzVBi和DSA-ph四种。研究了最佳掺杂浓度以及器件的亮度、电流密度、效率和色坐标等电学特性和光学特性。其中掺杂BCzVB制备了色纯度高、低电流猝灭性的蓝色有机发光器件,色坐标达到x=0.146,y=0.162,最大亮度为11600 cd/m2(15 V),电流效率为2.8 cd/A,流明效率为1.79 lm/W;以ADN为基质,分别以TBPe、BCzVBi和DSA-ph为掺杂剂,制备了另外三种对比器件。器件ADN∶TBPe色坐标为x=0.162,y=0.222(蓝绿光),效率随电流的增加而降低很快;器件ADN∶BczVBi有较好的色纯度(色坐标:x=0.164,y=0.146),但电流效率较低:2.03 cd/A,效率随电流的增加降低幅度也较快。器件ADN∶DSA-ph效率较高为8 cd/A,效率随电流增加变化幅度不大,但色纯度比较差(x=0.153,y=0.306),适合于做白色有机发光器件。     

两种蓝色有机电致发光材料

重点研究以两种蓝色OEL材料蒽类衍生物JBEM和联苯乙烯衍生物DPVBi分别作基质，以perylene作掺杂剂的器件的电致发光性能，特别研究了它稳定性，在这度和效率方面，两种器件并没有很大差别，然而在稳定性方面却有很大差别，蒽类衍生物JBEM的器件在100cd/m^2初始亮度下，半亮度寿命可达1035h，而DPVBi的器件在同样条件下，半亮度寿命为255h。通过分析两种器件的能级图，认为稳定性的差别可能源于两种蓝光材料本身的热稳定性不同，JBEM优于DPVBi，是一种很有前途的蓝色发光材料。     

Towards a fully optimised organic LED device: Analysis of surface synthesis using coupling reactions by ToF-SIMS

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and polarisation-modulation reflection-absorption infrared spectroscopy (PM-RAIRS) have been used to monitor the surface synthesis of self-assembled aromatic π-conjugated molecular wires on gold substrates as a step towards a novel structure for organic electroluminescent devices (OLEDs). The wires have been synthesised using a series of Schiff's base coupling reactions in solution on a self-assembled monolayer of an aromatic thiolate anchor. ToF-SIMS and PM-RAIRS measurements have demonstrated that: (i) the anchor molecules self-assemble at the gold surface, (ii) the anchor molecules selectively react through imino coupling reactions with additional wire units with high efficiency and (iii) the wire-like structure is predominantly orientated normal to the surface.