Spectroscopic properties and mechanism of Tm^3＋/Er^3＋/Yb^3＋ co-doped oxyfluorogermanate glass ceramics containing BaF2 nanocrystals

Transparent Tm^3＋/Er^3＋/yb^3＋ co-doped oxyfluorogermanate glass ceramics containing BaF2 nanocrystals are prepared. Under excitation of a 980-nm laser diode （LD）, compared with the glass before heat treatment, the Tm^3＋/Er^3＋/yb^3＋ co-doped oxyfluorogermanate glass ceramics can emit intense blue, green and red up-conversion luminescence and Stark- split peaks; X-ray diffraction （XRD） and transmission electron microscope （TEM） results show that BaF2 nanocrystals with an average diameter of 20 nm are precipitated from the glass matrix. Stark splitting of the up-conversion luminescence peaks in the glass ceramics indicates that Tm^3＋, Er^3＋ and （or） Yb^3＋ ions are incorporated into the BaF2 nanocrystals. The up-conversion luminescence intensities of Tm^3＋, Er^3＋ and the splitting degree of luminescence peaks in the glass ceramics increase significantly with the increase of heat treat temperature and heat treat time extension. In addition, the possible energy transfer process between rare earth ions and the up-conversion luminescence mechanism are also proposed.     

Structural and photoluminescence properties of terbium-doped zinc oxide nanoparticles

We present in this paper a study of the structural and photoluminescence （PL） properties of terbium （Tb） doped zinc oxide （ZnO） nanoparticles synthesized by a simple low temperature chemical precipitation method, using zinc acetate and terbium nitrate in an isopropanol medium with diethanolamine （DEA） as the capping agent at 60 ℃. The as-prepared samples were heat treated and the PL of the annealed samples were studied. The prepared nanoparticles were characterized with X-ray diffraction （XRD）. The XRD patterns show the pattern of typical ZnO nanoparticles and correspond with the standard XRD pattern given by JCPDS card No. 36-1451, showing the hexagonal phase structure. The PL intensity was enhanced due to Tb^3＋ doping, and it decreased at higher concentrations of Tb^3＋ doping after reaching a certain optimum concentration. The PL spectra of Tb^3＋ doped samples exhibited blue, bluish green, and green emissions at 460 nm （5^D3 - 7^F3）, 484 nm （5^D4 - 7^F6）, and 530 nm （5^D4 - 7^F5）, respectively, which were more intense than the emissions for the undoped ZnO sample. Based on the results, an energy level schematic diagram was proposed to explain the possible electron transition processes.     

Large coercivity and unconventional exchange coupling in manganese-oxide-coated manganese gallium nanoparticles

The microstructures and magnetic properties of nanoparticles, each composed of an antiferromagnetic （AFM） manganese-oxide shell and a ferromagnetic-like core of manganese-gallium （MnGa） compounds, are studied. The coreshell structure is confirmed by transmission electron microscope （TEM）. The ferromagnetic-like core contains three kinds of MnGa binary compounds, i.e., ferrimagnetic （FI） DO22-type MnaGa, ferromagnetic （FM） Mn8Gas, and AFM DO19-type Mn3Ga, of which the first two correspond respectively to a hard magnetic phase and to a soft one. Decoupling effect between these two phases is found at low temperature, which weakens gradually with increasing temperature and disappears above 200 K. The exchange bias （EB） effect is observed simultaneously, which is caused by the exchange coupling between the AFM shell and FM-like core. A large coercivity of 6.96 kOe （1Oe = 79.5775 A·m^-1） and a maximum EB value of 0.45 kOe are achieved at 300 K and 200 K respectively.     

Analysis of detection limit to time-resolved coherent anti-Stokes Raman scattering nanoscopy

In the implementation of CARS nanoscopy, signal strength decreases with focal volume size decreasing. A crucial problem that remains to be solved is whether the reduced signal generated in the suppressed focal volume can be detected. Here reported is a theoretical analysis of detection limit （DL） to time-resolved CARS （T-CARS） nanoscopy based on our proposed additional probe-beam-induced phonon depletion （APIPD） method for the low concentration samples. In order to acquire a detailed shot-noise limited signal-to-noise （SNR） and the involved parameters to evaluate DL, the T-CARS process is described with full quantum theory to estimate the extreme power density levels of the pump and Stokes beams determined by saturation behavior of coherent phonons, which are both actually on the order of ~ 109 W/cm2. When the pump and Stokes intensities reach such values and the total intensity of the excitation beams arrives at a maximum tolerable by most biological samples in a certain suppressed focal volume （40-nm suppressed focal scale in APIPD method）, the DL correspondingly varies with exposure time, for example, DL values are 103 and 102 when exposure times are 20 ms and 200 ms respectively.     

227-W output all-fiberized Tm-doped fiber laser at 1908 nm

In this paper, we report that a diode-pumped thulium-doped double clad silica fiber laser can provide powers of up to 227 W at 1908 nm, corresponding to a slope efficiency of 54.3%, and an optical-to-optical efficiency of 51.2%. The output power, to the best of our knowledge, is the highest output at 1908 nm. The beam quality M2 factor is about 1.56. Also discussed in this paper is the dependence of the laser performance on fiber length.     

Designing of a polarization beam splitter for the wavelength of 1310 nm on dual-core photonic crystal fiber with high birefringence and double-zero dispersion

We have proposed a novel kind of photonic crystal fiber which contains two asymmetric cores. The bireti＇ingence and the dispersion are numerically analyzed based on finite element method when the size of the air holes and the pitch of two adjacent air holes are changed. It is shown that the proposed photonic crystal fiber has high birefringence up to the order of 10-2 and double-zero dispersion points are at the wavelengths of 1310 nm and 800 rim, simultaneously. At the same time, the normalized power and the extinction ratios of the proposed photonic crystal fiber have been simulated. It is demonstrated that, at the wavelength of 1310 rim, the x-polarized mode and the y-polarized mode are separated when the propagation distance is 2.481 ram.     

785 nm激光诱导银纳米三角片聚集表面增强拉曼散射效应

为实现表面增强拉曼散射（SERS）光谱的强信号快速检测分析,报道了通过785 nm激光诱导银纳米三角片（AgNPRs）聚集的方法。采用配体辅助化学还原法制备了AgNPRs,其边长约为80 nm,表面等离子体吸收峰出现在约774 nm处,对785 nm光产生有效吸收。在785 nm光辐照下,AgNPRs逐渐聚集,对巯基苯甲酸的SERS信号逐渐增强,其源于AgNPRs吸收的光转化为热而引起的AgNPRs聚集。其增强因子高达10⁹。为快速获得强SERS信号,激发光功率需大于250 mW。     

覆膜长周期光纤光栅在生化分析中的应用及研究进展

总结了纳米薄膜修饰的长周期光纤光栅在折射率生物传感器方面的研究进展,重点介绍了纳米薄膜对长周期光纤光栅折射率传感性能的影响,详细阐述了覆膜长周期光纤光栅在生化分析检测领域的应用,并对其在折射率传感方面的应用前景作了展望。     

《光学精密工程》(月刊)

正中国光学开拓者之一王大珩院士亲自创办的新中国历史最悠久的光学期刊●现任主编为国家级有突出贡献的青年科学家曹健林博士●Benjamin J Eggleton,John Love等国际著名光学专家为本刊国际编委《光学精密工程》主要栏目有现代应用光学(空间光学、纤维光学、信息光学、薄膜光学、光电技术及器件、光学工艺及设备、光电跟踪与测量、激光技术及设备);微纳技术与精密机械(纳米光学、精密机械);信息科学(图像处理、计算机应用与软件工程)等。     

La1．6（MoO4）3∶Eu3＋0．4纳米晶合成及发光特性

采用燃烧法合成了La1．6（MoO4）3∶Eu3＋0．4纳米晶末,研究了其声子-掺杂-晶格相互作用和发光性质。 X射线粉末衍射（XRD）分析表明,在500～900℃退火后,La1．6（MoO4）3∶Eu3＋0．4样品为单一晶相。对样品进行了光致发光（PL）测量,激发Mo6＋-O2－电荷迁移带,观察到Eu3＋的系列发光,表明Mo6＋-O2－带和Eu3＋间存在能量传递,中心波长分别在λ1＝469 nm和λ2＝426 nm处的两个one-phonon边带,相应的声子能量分别为767和1202 cm－1,分别对应于Mo O和Mo—O—Mo伸缩振动。同时,计算了两个局域模电子-声子耦合强度的黄昆因子分别为S1＝0.055和S2＝0.037,为揭示其三价离子高传导特性及其负热膨胀物理特性提供了实验基础。