不可燃氟代碳酸酯基钠离子电池电解液

Lithium-ion batteries (LIBs) are widely used in cellphones, laptops, and electric cars owing to their high energy density and long operational lifetime. However, their further deployment in large-scale energy storage systems is restricted by the uneven distribution of lithium resources (~0.0017% (mass fraction, w) in the Earth's crust). Therefore, alternative energy storage systems composed of abundant elements are of urgent need. Recently, sodium-ion batteries (SIBs) have attracted significant attention and are considered to be a potential alternative for next-generation batteries owing to abundant sodium resources (~2.64% (w) of the Earth's crust), suitable potential (−2.71 V), and low cost. SIBs are similar to LIBs in terms of their physical and electrochemical properties. Previous studies have mainly focused on SIB storage materials, including hard carbon, alloys, and hexacyanoferrate, while the safety of SIBs remains largely unexplored. Similar to LIBs, the current electrolytes used in SIBs are mainly composed of flammable organic carbonate solvents (or ether solvents), sodium salts, and functional additives, which pose possible safety issues. Moreover, the chemical activity of sodium is much higher than that of lithium, leading to a higher risk of fire, thermal runaway, and explosion. To overcome this problem, herein we propose a fluorinated non-flammable electrolyte composed of 0.9 mol∙L⁻¹ NaPF₆ (sodium hexafluorophosphate) in an intermixture of di-(2, 2, 2 trifluoroethyl) carbonate (TFEC) and fluoroethylene carbonate (FEC) in a 7 : 3 ratio by volume. Its physical and electrochemical properties were studied by ionic conductivity, direct ignition, cyclic voltammetry, and charge/discharge measurements, demonstrating excellent flame-retarding ability and outstanding compatibility with sodium electrodes. The electrochemical tests showed that the Prussian blue cathode retained a capacity of 84 mAh∙g⁻¹ over 50 cycles in the prepared electrolyte, in contrast to the rapid capacity degradation in a flammable conventional carbonate electrolyte (74 mAh∙g⁻¹ with 57% capacity retention after 50 cycles). To test the practical application of the proposed electrolyte, a hard carbon anode was used and exhibited exceptional performance in this system. The enhancement mechanism was further verified by Fourier transform infrared (FTIR), X-ray diffraction (XRD), and scanning emission microscopy (SEM) investigations. Polycarbonate on the surface of the cathode played an important role for the studied electrolyte system. The polycarbonate may originate from FEC decomposition, which can enhance the ionic conductivity of the solid electrolyte interface (SEI) layer and reduce impedance. Hence, we believe that this proposed electrolyte may provide new opportunities for the design of robust and safe SIBs for next-generation applications.     

三维无溶剂含能Ag-MOF的制备、热分解动力学及爆炸性能

Solvent molecules can significantly reduce the heat of detonation and stability of energetic metal-organic framework (EMOF) materials, and the development of solvent-free EMOFs has become an effective strategy to prepare high-energy density materials. In this study, a solvent-free EMOF, [Ag₂(DTPZ)]_n (1) (N% = 32.58%), was synthesized by reacting a high-energy ligand, 2, 3-di(1H-tetrazol-5-yl)pyrazine (H₂DTPZ), with silver ions under hydrothermal conditions, and it was structurally characterized by elemental analysis, infrared spectroscopy, X-ray diffraction, and thermal analysis. In 1, the DTPZ²⁻ ligands that adopted a highly torsional configuration bridged the Ag⁺ ions in an octadentate coordination mode to form a three-dimensional framework (ρ = 2.812 g∙cm⁻³). The large steric effect and strong coordination ability of DTPZ²⁻ effectively prevented the solvent molecules from binding with the metal centers or occupying the voids of 1. Moreover, the strong π-π stacking interactions [centroid-centroid distance = 0.34461(1) nm] between the tetrazole rings in different DTPZ²⁻ ligands provided a high thermal stability to the framework (T_e = 619.1 K, T_p = 658.7 K). Thermal analysis showed that a one-step rapid weight loss with intense heat release primarily occurred during the decomposition of 1, suggesting potential energetic characteristics. Non-isothermal thermokinetic analyses (based on the Kissinger and Ozawa-Doyle methods) were performed using differential scanning calorimetry to obtain the thermoanalysis kinetic parameters of the thermodecomposition of 1 (E_a = 272.1 kJ·mol⁻¹, E_o = 268.9 kJ·mol⁻¹; lgA =19.67 s⁻¹). The related thermodynamic parameters [enthalpy of activation (ΔH^≠ = 266.9 kJ·mol⁻¹), entropy of activation (ΔS^≠ = 125.4 J·mol⁻¹·K⁻¹), free energy of activation (ΔG^≠ = 188.3 kJ·mol⁻¹)], critical temperature of thermal explosion (T_b = 607.1 K), and self-accelerating decomposition temperature (T_SADT = 595.8 K) of the decomposition reaction were also calculated based on the decomposition peak temperature and extrapolated onset temperature when the heating rate approached zero. The results revealed that 1 featured good thermal safety, and its decomposition was a non-spontaneous entropy-driven process. The standard molar enthalpy for the formation of 1 was calculated to be (2165.99 ± 0.81) kJ·mol⁻¹ based on its constant volume combustion energy determined using a precise rotating oxygen bomb calorimeter. Detonation and safety performance tests revealed that 1 was insensitive to impact and friction, and its heat of detonation (10.15 kJ·g⁻¹) was higher than that of common ammonium nitrate explosives, such as octogen (HMX), hexogene (RDX), and 2, 4, 6-trinitrotoluene (TNT), indicating that 1 is a promising high-energy and insensitive material.     

超高效液相色谱-质谱联用法监测人心房钠尿肽的化学合成

多肽作为神经递质、激素、受体等参与和调节许多重要的生命过程。随着对多肽结构与功能认识的深入,化学合成多肽在生物医药、生命分析等领域显示了重要价值。人心房钠尿肽（ANP）是一种由28个氨基酸组成的多肽类激素,其含量和代谢异常与心血管疾病、癌症等密切相关。针对ANP重要的生理功能,该文开展了ANP化学合成及其过程的监测与优化,设计了集固相合成线性直链多肽和液相氧化成环为一体的策略。基于高效液相色谱的分离性能和多级质谱的结构鉴定能力,建立了超高效液相色谱-串联质谱（UHPLC-MS/MS）分析新方法,对固相合成产物进行了分离分析,并对液相氧化方法进行了筛选和优化,最终分离纯化得到了目标多肽,为人心房钠尿肽的高效化学合成及氧化成环反应提供借鉴。     

原位溶剂热聚合法制备金属有机骨架/碳化氮纳米片涂覆的固相微萃取纤维用于红茶中农药残留的高灵敏检测

有机氯（OCPs）和拟除虫菊酯（PYs）是两类广泛使用的农药,对自然环境和人类健康具有极大危害。在本研究中,通过原位溶剂热聚合法制备了金属有机骨架/碳化氮纳米片（UiO-66/HOCN）复合材料涂覆的固相微萃取（SPME）纤维,该纤维拥有良好的稳定性,并对OCPs和PYs具有高效的萃取性能。将其与气相色谱-质谱（GC-MS）相结合,建立了用于OCPs和PYs检测的高灵敏分析方法。该方法对9种农药目标物表现出了令人满意的回收率和重现性,具有检出限低（0.03~0.30 ng/L）、线性范围宽（0.1~800.0 ng/L）和线性相关系数良好（≥ 0.9978）等优点。将所建立的方法用于实际红茶样品中农药残留的检测,成功地在实际样品中检测出了艾试剂（6.6 ng/L）、α-硫丹（54.7 ng/L）和联苯菊酯（185.8 ng/L）。实验结果表明,所建立的分析方法适用于复杂基质中农药残留的分析和监测。     

聚(2-甲基-2-噁唑啉)在毛细管电泳分离蛋白质中的应用

毛细管电泳作为一种常见的液相分离技术,因其分析速度快、分离效率高、样品消耗量少等特点,在蛋白质分离分析领域有广泛应用。然而,常用的熔融硅毛细管容易吸附蛋白质,导致电渗流不稳定,分离结果重现性变差;此外,商用毛细管电泳中常用的紫外检测器由于光程短,使得毛细管电泳的检测灵敏度往往不能达到低丰度蛋白质的直接分析要求。因此寻找能够阻止蛋白质吸附、同时能够提高检测灵敏度的涂层是毛细管电泳分离分析蛋白质的重要课题之一。聚（2-甲基-2-噁唑啉）（PMOXA）作为一种类肽类亲水性聚合物,具有与抗蛋白质吸附聚合物聚乙二醇类似的亲水性、抗蛋白质吸附性和生物相容性,而且其类肽结构使之具有较聚乙二醇更好的稳定性,因此近年来在生物质传递、药物载体和阻抗蛋白质吸附等领域得到越来越多的应用。该文主要从两个方面对聚（2-甲基-2-噁唑啉）在毛细管电泳中的应用进行了阐述。一是利用多巴胺作为黏合层将其涂覆在毛细管内壁作为抗蛋白质吸附涂层,这种涂层不仅能成功分离多种蛋白质的混合物（如溶菌酶、细胞色素C、核糖核酸酶A和α-胰凝乳蛋白酶原A）,而且在定量检测奶粉中三聚氰胺、乳铁蛋白的过程中,能阻抗其他蛋白质的非特异性吸附,提高了毛细管电泳对奶粉中三聚氰胺、乳铁蛋白的检测效率。二是将其与具有刺激响应性的聚合物（如聚丙烯酸）构成二元混合刷涂层,在一定的pH和离子强度条件下,涂层可吸附目标蛋白质（如牛血清白蛋白、溶菌酶）,在另一pH和离子强度条件下可将吸附的目标蛋白质全部释放,同时在释放过程中,处于涂层表面的聚（2-甲基-2-噁唑啉）会进一步阻止蛋白质的吸附,释放的蛋白质在电渗流和电泳的双重作用下快速迁移,到达检测器的蛋白质瞬时浓度大大增加,使目标蛋白质得到富集,目标蛋白质的检测信号得到放大,从而达到了提高低丰度蛋白质检测灵敏度的目的。此外,该文还对聚（2-甲基-2-噁唑啉）在毛细管电泳分离蛋白质中的未来发展趋势进行了展望。     

在线固相萃取-液相色谱-串联质谱法检测蘑菇中毒患者尿液中痕量α -鹅膏毒肽

建立了在线固相萃取-液相色谱-串联质谱（online SPE-LC-MS/MS）测定蘑菇中毒患者尿液中痕量α -鹅膏毒肽的分析方法。样品经甲酸酸化的乙腈-甲醇（5：1,v/v）沉淀蛋白质,反相液液微萃取去除样品提取液中的有机溶剂,毒素经ODS微柱（5 mm×2.1 mm,5 μm）在线SPE净化,XBridge^TM BEH C₁₈ 色谱柱（150 mm×3.0 mm,2.5 μm）分离,MS/MS测定。采用基于定量环的快速阀切换技术作为在线SPE和LC-MS/MS模块的接口,使得两个分离模块互相独立,无论是流动相还是压力,都不会互相干扰,保证了系统的稳定性;在线系统的精准净化,有效消除了后续质谱检测的基质效应,确保了尿液中痕量水平α -鹅膏毒肽的定性定量检测。尿液中α -鹅膏毒肽在0.1~50 μg/L范围内线性关系良好,相关系数（r ² ）为0.9983;检出限（LOD）为0.03 μg/L;α -鹅膏毒肽的加标（0.1、2.0和20 μg/L）平均回收率为84.3%~91.7%,相对标准偏差（RSD）为3.8%~7.2%。体内鹅膏毒肽代谢迅速,生物基质中痕量水平毒素的检测是其中毒实验室鉴定的主要难题,通过实际样品检测,证明该法操作简单,准确、灵敏;溶剂沉淀蛋白质和反相液液微萃取去除有机相和脂溶性基质的简单操作,可以作为水溶性毒素在线SPE-LC-MS/MS检测时快速且有效的配套前处理方法;基于在线SPE精准净化技术,可以实现尿液中α -鹅膏毒肽的高灵敏度测定（LOD为0.03 μg/L）,解决了中毒时患者体内痕量水平α -鹅膏毒肽定性确证的难题,部分患者α -鹅膏毒肽中毒实验室鉴定的时间可以扩展到90 h以上;同时,痕量水平的定量检测技术,可以为中毒后迅速代谢的α -鹅膏毒肽在体内的剂量反应关系研究提供可靠的技术支撑。     

加速溶剂萃取-磁固相萃取-高效液相色谱-串联质谱法测定水产品中10种氟喹诺酮类药物残留

养殖过程中的不合理使用和滥用使得水产品中氟喹诺酮抗生素残留累积量呈递增趋势,对人类的健康造成潜在的风险。建立高效、灵敏和可靠的水产品中氟喹诺酮类药物的同时分析方法十分重要。该研究建立了加速溶剂萃取-磁固相萃取-高效液相色谱-串联质谱法(ASE-MSPE-HPLC-MS/MS)测定水产品中沙拉沙星、氧氟沙星、恩诺沙星、丹氟沙星、洛美沙星、培氟沙星、环丙沙星、依诺沙星、诺氟沙星和双氟沙星残留的检测方法。采用室温自组装法,即在室温(25 ℃)下,将氧化石墨烯和零价纳米铁储备液快速涡旋混合,磁性分离收集沉淀物,得到GO@nZVI磁性复合材料。以扫描电镜、傅里叶变换红外光谱和X-射线衍射对磁性复合材料进行表征,结果显示GO@nZVI成功制备。该材料应用于MSPE净化中,ASE萃取温度为70 ℃,萃取溶剂为甲醇,萃取压力为10.34 MPa,静态萃取时间为5 min,循环萃取3次。萃取液浓缩后经MSPE有效净化后,采用Agilent ZORBAX Eclipse Plus C18色谱柱(100 mm×3.0 mm, 1.8 μm)梯度洗脱分离,MS/MS电喷雾正离子(ESI⁺)扫描、多反应监测(MRM)模式进行定量分析。氟喹诺酮的线性范围为1~100 μg/kg,线性相关系数(r²)均大于0.9995;目标物的检出限(S/N=3)为0.02~0.29 μg/kg,定量限(S/N=10)为0.07~0.98 μg/kg。所建方法成功用于黄鱼、草鱼、黑鱼、明虾和沼虾中氟喹诺酮的测定,在1倍、2倍、10倍定量限加标水平下得到的加标回收率为81.6%~105.8%,相对标准偏差(RSD)为4.2%~13.6%。研究表明,将ASE与MSPE有机结合,利用外部磁场实现萃取液的净化,无需离心和过滤操作,溶剂用量少,并且该方法所使用磁性萃取材料制备方法简单,具有自动化程度高、简便快速、方法灵敏度高、准确度高、重复性好等特点,可满足对水产品中FQs残留限量检测要求,具有实际应用前景。     

应用超高效液相色谱-四极杆-飞行时间质谱建立茶叶中农药残留的筛查与确证方法

基于超高效液相色谱-四极杆-飞行时间质谱(UPLC-QTOF-MS),使用UNIFI软件建立91种农药残留的筛查与确证方法,进行定性方法验证并应用于流通市场中茶叶的筛查检测。通过对收集的农药认证标准物质(CRM)分析,构建91种农药化合物的质谱数据库。样品经乙腈提取,固相萃取柱净化,Acquity BEH C18色谱柱分离,在MS^E模式下进行全信息采集(ESI+), UNIFI软件对数据进行匹配分析。设置保留时间最大偏差为±0.1 min,精确质量偏差阈值为±5×10^-6,可识别加合物形式包括[M+H]⁺、[M+Na]⁺、[M+K]⁺、[M+NH₄]⁺。参照SANTE/11813/2017指南进行定性方法学验证。在21份茶叶样品中添加混合标准溶液至4个水平(0.01、0.05、0.10、0.20 mg/kg),确定每种农药在茶叶样品中的筛查检出限(SDL),共评估了1911种农药/样品组合。发现有66种农药的SDL为0.01 mg/kg, 8种农药的SDL为0.05 mg/kg, 1种农药的SDL为0.10 mg/kg, 3种农药的SDL为0.20 mg/kg,共有13种农药的SDL大于0.20 mg/kg。一种农药在筛查检测中存在基质抑制效应。最后,应用建立的方法分析了流通市场中22份茶叶样品的农药残留情况,从6份茶叶样品中筛查检测出6种农药化合物,经人工鉴定均为阳性。该法为茶叶中农药残留的高通量筛查检测提供了参考。     

杂质吸附型净化结合超高效液相色谱-串联质谱法同时测定谷物和动物饲料中37种霉菌毒素

建立了谷物和动物饲料中霉菌毒素的高效、快速前处理方法,可同时提取和净化样品中37种理化性质差异较大的霉菌毒素,并采用超高效液相色谱-串联质谱（UPLC-MS/MS）进行定性和定量分析。样品粉碎处理后,经84%（体积分数,下同）乙腈水（含0.1%甲酸）溶液振荡提取20 min,MLJ-1杂质吸附型固相萃取柱净化。目标物在BEH RP18色谱柱上分离,以0.1 mmol/L乙酸铵溶液（含0.1%甲酸）和甲醇溶液（含0.1%甲酸）作为流动相进行梯度洗脱,质谱采用电喷雾正、负离子模式和多反应监测模式进行定性和定量分析。结果表明,本方法可在1 min内完成样品净化处理,15 min内完成37种目标化合物的分离分析。37种目标物在各自线性范围内线性关系良好,基质匹配标准曲线的相关系数均大于0.98。除伏马毒素外的所有目标化合物在4个添加水平下的回收率介于80%~120%之间,相对标准偏差（RSD）<20%（n=5）,方法定量限为2~40 μg/kg,能够满足《饲料卫生标准》判定要求。该方法操作简单、快速、准确,适合谷物和动物饲料中多种霉菌毒素同步筛查和确证检测。     

核壳硅碳复合微球固定相的制备及其在糖类分离中的应用

采用一步法在二氧化硅(SiO₂)表面涂覆酚醛树脂聚合物(PF),并在氮气气氛下碳化,制备了核壳硅碳复合微球(Sil@MC)固定相。实验对Sil@MC固定相进行形貌观察和孔结构分析,表明制备出的Sil@MC固定相具有良好的单分散性,包覆后的Sil@MC材料比表面积为302 m²/g,平均孔径为9.5 nm,孔容为0.63 cm³/g,说明通过共聚反应成功地将碳材料固定在二氧化硅上。将制备的Sil@MC材料作为HPLC固定相,采用匀浆法装柱,以乙腈-水(含0.1%(v/v)甲酸)作为流动相,发现Sil@MC色谱柱在高效液相色谱-质谱中可以实现4种极性糖类化合物(D-(+)-氨基葡萄糖盐酸盐、葡萄糖、D-(+)-海藻糖二水合物和棉子糖)的分离,然而未涂覆酚醛树脂的SiO₂材料未能对这4种极性糖类化合物实现分离。实验进一步对Sil@MC固定相的性能进行了评价,代表性的低聚糖异构体松三糖和棉子糖、耐斯糖和水苏糖及乳寡糖异构体3'-唾液酸乳糖和6'-唾液酸乳糖、乳-N-四糖和乳-N-新四糖在Sil@MC色谱柱中被成功分离,峰形良好,展现了基于酚醛树脂衍生碳的核壳硅碳复合材料在在极性化合物色谱分离方面具有应用潜力。