Au core-PtAu alloy shell nanowires for formic acid electrolysis

Inefficient electrocatalysts and high-power consumption are two thorny problems for electrochemical hydrogen(H2)production from acidic water electrolysis.Herein we report the one-pot precise synthesis of ultrafine Au core-Pt Au alloy shell nanowires(Au@PtxAu UFNWs).Among them,Au@Pt_0.077 Au UFNWs exhibit the best performance for formic acid oxidation reaction(FAOR)and hydrogen evolution reaction(HER),which only require applied potentials of 0.29 V and-22.6 m V to achieve a current density of 10 m A cm^-2,respectively.The corresponding formic acid electrolyzer realizes the electrochemical H2 production at a voltage of only 0.51 V with 10 m A cm^-2 current density.Density functional theory(DFT)calculations reveal that the Au-riched Pt Au alloy structure can facilitates the direct oxidation pathway of FAOR and consequently elevates the FAOR activity of Au@Pt_0.077 Au UFNWs.This work provides meaningful insights into the electrochemical H₂ production from both the construction of advanced bifunctional electrocatalysts and the replacement of OER.     

Layered Ag-graphene films synthesized by Gamma ray irradiation for stable lithium metal anodes in carbonate-based electrolytes

Lithium metal batteries are considered as high energy density battery systems with very promising prospects and have bee n widely studied.However,The uncon trollable plating/strippi ng behavior,infinite volume change and den drites formation of lithium metal anode restrict the applicati on.The unc on trolled n ucleati on of lithium caused by the non uniform multi-physical field distributions,can lead to the undesirable lithium deposition.Herein,a graphene composite uniformly loaded with Ag nano-particles(Ag NPs)is prepared through a facile Gamma ray irradiation method and assembled into self-supported film with layered structure(Ag-rGO film).Whe n such film is used as a lithium metal an ode host,the uncontrolled deposition is converted into a highly nucleation-induced process.On one hand,the Ag NPs distributed between the in terlayers of graphe ne can preferentially induce lithium nu cleati on and en able uniform deposition morphology of lithium between interlayers.On the other hand,the stable layered graphene structure can accommodate volume change,stabilize the interface between anode and electrolyte and inhibit dendrites formation.Therefore,the layered Ag-rGO film as anode host can reach a high Coulombic efficiency over 93.3% for 200 cycle(786 h)at a current density of 1 mA cm^-2 for 2 mAh cm^-2 in carbonate-based electrolyte.This work proposes a facile Gamma ray irradiation method to prepare metal/3D-skeleton structure as lithium anode host and demonstrates the potential to regulate the lithium metal deposition behaviors via manipulating the distribution of lithiophilic metal(e.g.Ag)in 3D frameworks.This may offer a practicable thinking for the subsequent design of the lithium metal anode.     

中国纤维素乙醇技术的研究进展

中国面临着严重的能源短缺和环境污染问题,中国政府正在局部几个省份内政策性鼓励燃料乙醇生产和使用.尽管当前主要是用玉米和谷物作为生产乙醇的原料,然而中国具有大量潜在的低成本的纤维素生物质原料,可以极大地扩大乙醇的产量,降低原料成本.近20年来,由于技术的革命性进步,已使得纤维素乙醇的生产成本从4美元/加仑以上,降低至约1.2-1.5美元/加仑.其中,每吨生物质约44美元.因此,目前乙醇掺汽油具有十分强的市场竞争力.已有几个公司正在建造首批商业纤维素乙醇工厂,虽然这些刚起步的小型设施在合理利用和管理上风险较小,但规模经济需要较大型工厂.尽管配送生物质原料的成本会随需求的增加而增加,但在乙醇生产基础上的生物精炼技术的发展,尤其是化工产品和动力的协同生产,将会使全过程的经济可行性大大提高.进一步深入的基础研究,将解决低成本下实现纤维素的完全利用,以确保在无政策性补贴的前提下,真正使纤维素乙醇成为具有市场竞争力的低成本纯液体燃料.     

Binary ligand strategy toward interweaved encapsulation-nanotubes structured electrocatalyst for proton exchange membrane fuel cell

Hierarchically porous architecture of ir on-nitroge n-carb on(Fe-N-C)for oxyge n reducti on reaction(ORR)is highly desired towards efficient mass transfer in the fuel cell device manner.Herein,we reported a binary ligand strategy to prepare zeolitic imidazolate frameworks(ZIFs)-derived precursors,wherein the addition of secondary ligand endows precursors with the capabilities to transform into porously interweaved encapsulation-nanotubes structured composites after calcination.The optimal catalyst,i.e.,termed as Fe₆-M/C-3,exhibits excellent durability with 88.8%current retention after 50,000 seconds in 0.1 M HClO₄solution by virtue of nanoparticles-encapsulation features,which is more positive than the benchmark commercial 20 wt%Pt/C catalyst.Moreover,a promising maximum power density of Fe₆-M/C-3 as cathode catalyst was also dem on strated in proton exchange membrane fuel cells(PEMFCs)measurements.Therefore,this binary ligand approach to the fabrication of hierarchically porous structures would also have significant implications for various other electrochemical reactions.     

Molten salt as ultrastrong polar solvent enables the most straightforward pyrolysis towards highly efficient and stable single-atom electrocatalyst

Currently,pyrolysis as the most widely used method still has some key issues not well resolved for synthesis of carbon-supported single-atom catalysts(C-SACs),e.g.,the sintering of metal atoms at high temperature as well as the high cost and complicated preparations of precursors.In this report,molten salts are demonstrated to be marvellous medium for preparation of C-SACs by pyrolysis of small molecular precursors(ionic liquid).The ultrastrong polarity on one hand establishes robust interaction with precursor and enables better carbonization,resulting in largely enhanced yield.On the other hand,the aggregation of metal atoms is effectively refrained while no nanoparticle or cluster is formed.By this strategy,a C-SAC with atomically dispersed Fe-N₄ sites and a high specific area over 2000 m² g^-1 is obtained,which illustrates high ORR activity in both acid and alkaline media.Moreover,this SAC exhibits superior methanol tolerance and stability after acid soaking at 85℃ for 48 h.It is believed that the molten-salts-assisted pyrolysis can be developed into a routine strategy as it not only can largely simply the synthesis of C-SACs,but also can be extended to prepare other types of SACs.     

镧对Mg-Si合金中Mg2Si相变质的影响

研究了Mg-5Si合金中La的添加对初生Mg2Si相变质的影响。结果表明,适量的La能够有效地变质初生Mg2Si相。基于本文的研究,在添加约0.5%La时,获得了最佳的变质效果,此时,初生Mg2Si相的尺寸减小到25μm以下,其形态从粗大的树枝形状变为多面体形状。然而,当La增加到0.8%或者更高时,初生Mg2Si相又生长为粗大的树枝形态。而且,在凝固过程中发现形成了一些LaSi2化合物,这些化合物的数量随着La的增加而呈现逐渐增加的趋势。     

电感耦合等离子体质谱法测定天然水体中19种元素

建立STD/KED模式-电感耦合等离子体质谱（ICP-MS）法同时测定天然水体中铍、硼、钛、钒、铬、锰、钴、镍、铜、锌、钼、镉、锑、钡、铊、铅、铁、砷和硒19种元素的分析方法。仪器调谐校准后,样品在线加入锂、钪、铑、铋校准溶液校正,以标准曲线内标法定量分析。标准曲线相关系数均大于0.999,样品加标回收率为92.6%～103.6%,质控样品测定值相对标准偏差为0.20%～2.6%(n=6),方法检出限为0.01～0.70μg/L。该方法灵敏度高,操作简便,节省人力,能满足天然水体中19种元素的同时检测需要。     

电解质-非电解质混合溶液活度系数的关联及溶解的推算 II:NH3-NaCl-Na2SO4-H2O体系的液固平衡热力学

由于在研究的体系中, Na2SO4是非对称电解质, 且能生成水合盐, 故推导了由非对称型电解质与非电解质所构成的混合溶液的各组分的活度系数关联通式, 并在此基础上讨论了水合盐液固平衡的计算方法.     

黄花棘豆化学成分的研究II:两种三萜皂苷的结构

从黄花棘豆的总皂苷中分离出两个新皂苷1和2.经光谱分析及化学方法确证,1为3-O-[α-L-鼠李吡喃糖基(1→2)-β-D-葡萄吡喃糖基(1→4)-β-D-葡萄吡喃糖醛酸基]-黄豆醇B;2为3-O-[α-L-鼠李吡喃糖基(1→2)-α-L-阿拉伯吡喃糖基(1→4)-β-D-葡萄吡喃糖醛酸基]-黄豆醇B.     

二氧化钛纳米管的研究进展

二氧化钛纳米管由于其新奇的光电、催化、气敏等性能引起了广泛的关注,在太阳能电池、光催化、环境净化、气体传感器等领域有潜在的应用价值.本文概述了近年来在制备方法、反应机理和组成、晶型和形貌及掺杂和应用方面的进展,并讨论了今后可能的研究发展方向.     

Heat capacities of NaNO3 and KNO3 from 350 to 800 K

The heat capacities of NaNO₃ and KNO₃ were determined from 350 to 800 K by differential scanning calorimetry. Solid-solid transitions and melting were observed at 550 and 583 K for NaNO₃ and 406 and 612 K for KNO₃, respectively. The entropies associated with the solid-solid transitions were measured to be (8.43± 0.25) J K⁻¹ mole⁻¹ for NaNO₃ and (13.8±0.4) J K⁻¹ mole⁻¹ for KNO₃. At 298.15 K the values of C⁰_P S⁰_P, {H⁰(T)-H⁰(0)}/T and -{G⁰(T)-H⁰(0)}/T, respectively, are 91.94, 116.3, 57.73, and 58.55 J K⁻¹ mole⁻¹ for NaNO₃ and 95.39, 133.0, 62.93, and 70.02 J K⁻¹ mole⁻¹ for KNO₃. Values for S⁰_T, {H⁰(T)-H⁰(0)}/T, and -{G⁰(T)-H⁰(0)}/T were calculated and tabulated from 15 to 800 K for NaNO₃ and KNO₃.     

1-乙基-3-甲基咪唑丙氨酸离子液体热力学性质的研究

用中和法合成了氨基酸离子液体1-乙基-3-甲基咪唑丙氨酸([C₂mim][Ala]),并利用恒温环境的溶解反应热量计,在(288.15±0.01) K-(308.15±0.01) K温度范围内每隔5 K,测定不同质量摩尔浓度离子液体在水中的溶解焓(Δ_solH_m^θ).根据Archer的方法,通过线性拟合得到了该离子液体的标准摩尔溶解焓(Δ_sol),并计算了其相对表观摩尔溶解焓(^ΦL).在298.15 K下,根据Glasser经验方法得到了格子能U_POT = 566 kJ·mol^-1,并计算了其阴阳离子水化焓值(ΔH⁺ + ΔH^-) = -620 kJ·mol^-1及阴离子水化焓ΔH^-([Ala]^-) = -387 kJ·mol^-1.此外,估算了[C₂mim][Ala]水溶液的热容(C_p(sol))和表观摩尔热容(^ΦC_p).     

合成黑索今中副产物3, 5-二硝基-1-氧-3, 5-二氮杂环己烷的晶体结构及热分解动力学

直接法硝解乌洛托品制备黑索今的过程中合成了一种新型的环形副产物,采用硅胶柱层析法分离得到3, 5-二硝基-1-氧-3, 5-二氮杂环己烷,洗脱剂为:丙酮/二氯甲烷,梯度洗脱.以丙酮为溶剂培养得到了3, 5-二硝基-1-氧-3, 5-二氮杂环己烷单晶,用元素分析、傅里叶变换红外(FTIR)光谱、核磁共振氢谱(NMR)以及质谱(MS)对其结构进行了表征,用X射线单晶衍射仪测定了其晶体结构.结果表明,晶体C₃H₆N₄O₅分子量为178.12,属于单斜晶系,空间群P121/n1,晶胞参数: a = 0.58128(13) nm, b = 1.72389(14) nm, c = 0.71072(6) nm, β =112.056°, V = 0.66006(16) nm³, Z = 4, D_C= 1.792 g·cm^-3, μ = 0.17 mm^-1, F(000) = 368.0,最终偏差因子R =0.0397.用同步热分析仪技术研究了3, 5-二硝基-1-氧-3, 5-二氮杂环己烷的热行为, DSC曲线上在383.15和519.05 K分别有一个尖锐的熔化吸热峰和分解放热峰.另外,根据Kissinger方程及Flynn-Wall-Ozawa方程和不同升温速率下的TG曲线计算得到了该化合物的热分解动力学参数(活化能和指前因子),利用Coats-Redfern法研究了该物质的热分解机理.结果表明: 3, 5-二硝基-1-氧-3, 5-二氮杂环己烷是一种低熔点、热稳定性好的化合物. Kissinger方程计算其活化能为212.32 kJ·mol^-1,指前因子为6.20×10²⁰ s^-1, Flynn-Wall-Ozawa方程计算其活化能为210.39 kJ·mol^-1,该物质的热分解动力学方程为G(α) = (1-α)^-1-1,反应级数为2.     

桑色素与血清白蛋白相互作用热力学行为

利用荧光光谱、紫外-可见吸收光谱、圆二色谱、分子模拟等方法,在近似生理条件下,以牛血清白蛋白(BSA)为模式蛋白质,研究了桑色素(Morin)和血清白蛋白相互作用的热力学行为及其特征。荧光光谱结果表明:Morin能有效猝灭BSA的内源荧光,猝灭机制为静态猝灭;通过van’t Hoff方程,获取了BSA与Morin结合的热力学参数(?H?、?S?、?G?等),发现Morin与BSA两者之间的相互作用是一个吉布斯自由能降低的自发过程,且氢键和范德华力是二者结合的驱动力。通过分子模拟方法,发现Morin结合在BSA分子亚结构域IIIA的疏水腔内位点II,荧光共振能量转移结果表明Morin和与BSA的两个色氨酸残基的平均距离为3.09nm。圆二色谱结果表明Morin分子的结合会引起BSA分子α-螺旋含量降低。     

Non-isothermal Decomposition Kinetics of K(AHDNE)

The thermal behavior and non-isothermal decomposition kinetics of 1-amino-1-hydrazino-2,2-dinitro- ethylene potassium salt[K(AHDNE)] were studied under the non-isothermal conditions by different scanning calorimeter(DSC) method. The thermal behavior of K(AHDNE) presents three exothermic decomposition processes. The kinetic equation of the first thermal decomposition reaction obtained is dα/dT=(10^19.63/β)3(1-α)[-ln(1-α)]^2/3exp(-1.862× 10⁵/RT). The self-accelerating decomposition temperature(T_SADT) and critical temperature of thermal explosion(T_b) of K(AHDNE) are 162.5 and 171.4 ℃, respectively. K(AHDNE) has higher thermal stability than AHDNE.     

Synthesis, characterization and thermal investigation of M[M(C2O4)3]·xH2O (x=4 for M=Cr(III); x=2 for M=Sb(III) and x=9 for M=La(III))

The complexes, M[M(C₂O₄)₃]·xH₂ O, where x=4 for M=Cr(III), x=2 for M=Sb(III) and x=9 for M=La(III) have been synthesized and their thermal stability was investigated. The complexes were characterized by elemental analysis, IR and electronic spectral data, conductivity measurement and powder X-ray diffraction (XRD) studies. The chromium(III)tris(oxalato)chromate(III)tetrahydrate (COT), Cr[Cr(C₂ O₄)₃]·4H₂O, released water in a stepwise fashion. Removal of the last trace of water was accompanied by a partial decomposition of the oxalate group. Thermal investigation using TG, DTG and DTA techniques in air produced Cr₂O₃ at 858°C through the intermediate formation of Cr₂O₃ and CrC₂O₄ at around 460°C. While DSC study in nitrogen up to 670°C produced a mixture of Cr₂O₃ and CrC₂O₄. In antimony(III)tris(oxalato)antimonate(III)dihydrate (AOD), Sb[Sb(C₂O₄)₃]·3H₂O the dehydration took place during the decomposition of precursor at 170–290°C and finally at ca. 610°C Sb₂ O₅ along with trace amounts of Sb₂O₄ were produced. Trace amount of Sb₂O₃ and Sb along with Sb₂O is proposed as the end product at 670°C of AOD in nitrogen. The oxide La₂O₃ is formed at 838°C from the study with TG, DTG and DTA in air of lanthanum(III)tris(oxalato)lanthanum(III)nonahydrate (LON), La[La(C₂O₄)₃]·9H₂O. Intermediate dioxycarbonate, La₂O₂CO₃ was generated at 526°C prior to its decomposition to lanthanum oxide in air; whereas in N₂ the formation of La₂(CO₃)₃ at 651°C was proposed. The thermal parameters have been evaluated for each step of the dehydration and decomposition of COT, AOD and LON using five non-mechanistic equations i.e. Flynn and Wall, Freeman and Carroll, Modified Freeman and Carroll, Coats–Redfern and MacCallum–Tanner equations. Kinetic parameters, such as, E^*, k_o, ΔH^*, ΔS^* etc. were also supplemented by DSC studies in nitrogen for all the three complexes. Some of the intermediate species have been identified by analytical and powder XRD studies. Tentative schemes has been proposed for the decomposition of all three compounds in air and nitrogen.     

聚羟基丁酸-戊酸的非等温热分解反应动力学

用非等温TG-DTA技术, 在5.0、10.0、15.0和20.0 K•min^-1线性升温条件下, 研究聚羟基丁酸-戊酸(PHBV)的热分解反应动力学. 结果表明, 分解过程分三个阶段：分解初期、分解中期和分解后期. 分解初期的机理函数为Avrami-Erofeev方程(n=1/2), 对应随机成核和随后生长机理, 表观活化能E_a(β→0)为69.44 kJ•mol^-1, 指前因子A(β→0)为106.27 s^-1；分解中期的机理函数为Avrami-Erofeev方程(n =2/5), 对应随机成核和随后生长机理, 表观活化能Ea(β→0)为117.64 kJ•mol^-1, 指前因子A(β→0)为10^11.48 s^-1；分解后期的机理函数为Mampel Power法则(n=1/3), 对应机理为幂函数法则, 表观活化能Ea(β→0)为116.64 kJ•mol^-1, 指前因子A(β→0)为10^8.68 s^-1.     

Study of initiation reactivity of some plastic explosives by vacuum stability test and non-isothermal differential thermal analysis

On the basis of measurements of 18 high explosives by means of the Czech Vacuum Stability Test (VST) STABIL, a relationship has been specified between the results of this test and those of Russian manometric method. The said relationship was used to predict the Arrhenius parameters (E_a and log A values) of four plastic explosives based on RDX and one high explosive based on PETN (Semtex). The slopes E_aR⁻¹ of Kissinger's equation were specified by means of non-isothermal differential thermal analysis (DTA) and evaluation of the measurement results by means of the Kissinger method. The role played by binders and plasticizers in thermal decomposition of nitramines was pointed out on the basis of relationship between the E_a values obtained from VST and the E_aR⁻¹ values obtained from DTA, both for plastic explosives, eight nitramines, Composition B and PETN. The relationships between the E_aR⁻¹ values and thermostability threshold was specified for the given group of explosives. The relationship classify some of the studied plastic explosives as belonging to nitramines with steric hindrance in the molecule (CPX, TNAZ and HNIW). The relationship between E_aR⁻¹ values and drop energies, E_dr, sharply differentiates between plastic explosives and individual nitramines. From the relationship between the E_dr and D² values it was found that the increasing performance of the studied nitramines and plastic explosives is connected with the decrease in their impact sensitivity. Also specified are the approximate linear dependences between the peak temperatures of exothermic decomposition of all the explosives studied and their ignition temperatures, T_ig, or critical temperatures, T_c; these dependences were applied to prediction of T_ig and T_c of both the studied plastic explosives and some of the nitramines.     

基于光微热量-荧光光谱联用技术研究光催化热力学和动力学的温度效应

利用光微热量-荧光光谱联用技术,对光催化过程的热谱和光谱信息同步监测,获取了五个温度下,g-C_3N_4@Ag@Ag_3PO_4光催化降解罗丹明B的原位热动力学、光谱动力学信息,探究了温度对相关参数的影响。结果表明,催化降解反应分为三个阶段:(i)污染物和催化剂的光响应过程;(ii)光响应吸热和污染物降解放热的竞争过程;(iii)保持稳定的放热率。吸热和放热的竞争过程符合一级动力学,降解速率随着温度的升高而增大;稳定放热阶段为拟零级反应,在283.15 K、288.15 K、293.15 K、298.15 K、303.15 K下的放热速率分别为0.4668±0.3875μJ·s~(-1)、0.5314±0.3379μJ·s~(-1)、0.5064±0.3234μJ·s~(-1)、0.5328±0.3377μJ·s~(-1)、0.5762±0.3452μJ·s~(-1)。本研究为探究光催化过程的原位热力学、热动力学及光谱信息及机理的推测提供科学依据。     

计时电量法求NiCl2(bpy)3在DMF中的扩散系数和速率常数

讨论了NiCl₂(bpy)₃(bpy：2,2-联吡啶)在DMF中的电化学行为. 控制电位使电极过程处于扩散控制下, 采用计时电量法求得了29 ℃时NiCl₂(bpy)₃在DMF中的扩散系数为5.99×10^－6 cm²•s^-1, 不同温度下的扩散系数随温度升高而增大. 选择合适的电极电位, 使电极过程处于扩散和电化学混合控制下, 采用计时电量法求得了不同电极电位下的反应速率常数k_f, 以及不同温度下的标准速率常数k⁰, 求得了表观活化能为14.4 kJ•mol^-1.