隐-显积分因子间断Galerkin方法求解二维辐射扩散方程

提出一种求解二维非平衡辐射扩散方程的数值方法.空间离散上采用加权间断Galerkin有限元方法,其中数值流量的构造采用一种新的加权平均;时间离散上采用隐-显积分因子方法,将扩散系数线性化,然后用积分因子方法求解间断Galerkin方法离散后的非线性常微分方程组.数值试验中在非结构网格上求解了多介质的辐射扩散方程.结果表明:对于强非线性和强耦合的非线性扩散方程组,该方法是一种非常有效的数值算法.     

振动波包法模拟氢溴酸光解离动力学

研究了在零度和非零度时的双原子分子离子HBr⁺在不同包络函数的超快激光脉冲作用下的光解离动力学. 主要计算了HBr⁺电子基态时的参数. 利用从头算理论在CCSD/6-311++G(3df,2pd)水平计算了HBr+的势能值,用Morse参数模拟后,与非依时傅立叶格点哈密顿方法获得的束缚态振动能量本征值进行比较. 另外,探索了温度、脉冲包络函数和光强度对光解离过程的影响.     

基于X射线衍射仪的X光晶体本征参量的标定

X光晶体本征参量的实验标定是准确鉴定X光晶体种类和品质,研制各种类型晶体谱仪,X光线谱定量测量和高分辨X光单能成像的基础.基于X射线衍射仪,通过制作平面晶体样品架,采取控制X射线管电源、滤波片选取和厚度控制等措施,极大地抑制了Cu-KJ3及韧致辐射,使X射线管光源Cu-Kα单能化,提出了用滤片作为光源单能化的判据.对X光线谱测量中常用的X光分光晶体季戊四醇[PET(002)]的晶格常量2d和Cu-Ka能点的积分衍射效率R.进行了标定方法研究,其标定值分别为(0.87425±0.00042)nm和(1.759±0.024)×10-4 Rad.基于X射线衍射仪的X光晶体本征参量的精密实验标定方法既快速高效,且十分方便和灵活.通过更换衍射仪的X射线管靶材,采取类似方法,可以标定其它能点的晶体积分衍射效率,可为X光晶体的本征参量库提供更多的标定数据.     

Sensitivity enhancement of distributed polarization coupling detection in Hi-Bi fibers

The intensity and position of the coupling points in high birefringence(Hi-Bi)fibers can be detected effectively using distributed polarization coupling(DPC)detection.The detection sensitivity can decrease due to mechanical vibration disturbance and environment noise.Thus,a method based on empirical mode decomposition is proposed to detect weak mode coupling points.The simulation and experimental results illustrate that the proposed method can suppress the noise effectively and improve sensitivity significantly.The method can identify coupling points as weak as-60 dB embedded in noise automatically and effectively.The algorithm is applicable for DPC,and the experimental sensitivity is improved by 10 dB.     

Online ef fective backscattering estimation for ring laser gyro

Lock-in phenomenon in ring laser gyroscopes is directly related to effective backscattering,which includes both backscattering and nonuniform loss.Effective backscattering often differs in different states and can only be reflected in a working state via online estimation in the working state.Moreover,effective backscattering can result in the intensity modulation of beams in the opposite directions.The effective backscattering parameters can be obtained by measuring the weak modulations in the intensity signals under different rotation rates and by using the curve-fitting method.This letter demonstrates the online estimation of backscattering.     

Dual-channel phase-shifting interferometry for microscopy with second wavelength assistance

Dual-channel phase-shifting interferometry for simultaneous phase microscopy is presented. Red and blue light beams are used for microscope illumination. A 45 tilted beamsplitter replicates the object and reference waves in red light together with the object wave in blue light into two parallel beams. The two resulting quadrature phase-shifting interferograms in red light and the object waves in blue light are generated in the two channels. The two interferograms are recorded simultaneously by a color charge-coupled device (CCD) camera, and can be separated via RGB components of the recorded color patterns without crosstalk. As a result, the phase of tested specimen can be retrieved. The feasibility of the proposed method is demonstrated by test performed on a microscopic specimen.     

Improved Monte Carlo model for multiple scattering calculations

The coupling between the Monte Carlo (MC) method and geometrical optics to improve accuracy is inves- tigated. The results obtained show improved agreement with previous experimental data, demonstrating that the MC method, when coupled with simple geometrical optics, can simulate multiple scattering with enhanced fidelity.     

用光学方法解释活体线粒体功能：总结与展望

为什么要研究线粒体？人的许多疾病与线粒体功能失调直接相关,如癌症、帕金森氏病、阿尔兹海默症、肝病、肾病、败血症等。因此,我们需要研究线粒体,发现疾病发生的规律,从而找到应对这些疾病的治疗手段和药物。     

Hcp-icosahedron structural transformation induced by the change in Ag concentration during the freezing of （CoAg）561 clusters

The synergy effect of alloy elements in bimetallic clusters can be used to tune the chemical and physical properties. Research on the influences of alloy concentration and distribution on the frozen structure of bimetallic clusters plays a key rolc in exploring new structural materials. In this paper, we study the influence of Ag concentration on the frozen structure of the （AgCo）561 cluster by using molecular dynamics simulation with a general embedded atom method. The results indicate that tt~e structure and chemical ordering of the （AgCo）561 cluster are strongly related to Ag concentration. Hcp-icosahedron structural transformation in the frozen （CoAg）561 cluster can be induced by changing Ag concentration. The chemical ordering also transforms to Janus-like Co Ag from core-shell Co-Ag.     

Two-step pose estimation method based on five reference points

A two-step method for pose estimation based on five co-planar reference points is studied.In the first step, the pose of the object is estimated by a simple analytical solving process.The pixel coordinates of reference points on the image plane are extracted through image processing.Then,using affine invariants of the reference points with certain distances between each other,the coordinates of reference points in the camera coordinate system are solved.In the second step,the results obtained in the first step are used as initial values of an iterative solving process for gathering the exact solution.In such a solution,an unconstrained nonlinear optimization objective function is established through the objective functions produced by the depth estimation and the co-planarity of the five reference points to ensure the accuracy and convergence rate of the non-linear algorithm.The Levenberg-Marquardt optimization method is utilized to refine the initial values.The coordinates of the reference points in the camera coordinate system are obtained and transformed into the pose of the object.Experimental results show that the RMS of the azimuth angle reaches 0.076°in the measurement range of 0°-90°;the root mean square(RMS) of the pitch angle reaches 0.035°in the measurement range of 0°-60°:and the RMS of the roll angle reaches 0.036°in the measurement range of 0°-60°.