基于参数连续HC Bézier-like曲线的过渡曲线的构造

在形状调配过程中,过渡曲线的连续性往往是很难保证的.给出HC Bézier-like曲线的定义,然后从过渡曲线满足一定连续性的角度出发,利用HC Bézier-like曲线的端点性质,研究形状参数曲线的参数连续特征保持问题.给出线性混合过程中,一阶和二阶参数连续保持条件,从而得出一般的HC Bézier-like曲线在...     

半导体粒子CdS的光学性质研究

采用DDA(discrete dipole approximation)方法对用于光催化制氢的半导体粒子的光学性质进行了研究,讨论了形状、尺寸等因素对放置在水中的CdS吸收效率的影响,选取的粒子形状有球形,圆柱形,正四面体,正三棱柱,长方体,正六角棱柱,发现粒子形状对局部表面等离子体共振峰的数目和共振波长有重要影响,而...     

隔板截面形状对旋转冲压压缩转子性能的影响

本文采用三维雷诺平均N-S方程和Spalart-Allmaras湍流模型,在设计工况下对3种具有不同隔板截面形状的旋转冲压压缩转子进行了数值研究.计算结果表明:旋转冲压压缩转子进气流道内主要存在三道曲线激波对气流进行压缩;隔板截面形状对激波及气流流动影响较大,隔板截面形状为"正梯形"时,旋转冲压压缩转子具有较高的效率和...     

Timing properties and pulse shape discrimination of LAB-based liquid scintillator

Linear Alkyl Benzene (LAB) is a promising liquid scintillator solvent in neutrino experiments because it has many appealing properties. The timing properties of LAB-based liquid scintillator have been studied through ultraviolet and ionization excitation in this study. The decay time of LAB, PPO and bis-MSB is found to be 48.6 ns, 1.55 ns and 1.5 ns, respectively. A model can describe the absorption and re-emission process between PPO and bis-MSB perfectly. The energy transfer time between LAB and PPO with different concentrations can be obtained via another model. We also show that the LAB-based liquid scintillator has good (n, γ) and (α, γ) discrimination power.     

N=28丰中子核的形变和形状共存研究

利用同位旋依赖的尼尔逊势,在宏观-微观理论框架下,计算了幻数N=28同中子链上原子核的性质,研究了N=28同中子链上原子核的形变和形状共存现象. 研究结果表明,N=28这个幻数在Na,Mg, Al同位素链上有着强的形状共存现象. 此外,计算表明⁴²Si的基态为扁椭球,同时在Si同位素链上的形状共存现象相对较弱. 关键词： 同位旋 幻数 形变 形状共存     

Simulation of Viscoelastic Fluid Flows in Expansion Geometry Using Finite Volume Approach简

The simulation results on viscoelastic fluid flows in sudden expansion geometry with different expansion ratios are presented. Oldroyd-B, linear Phan-Thien-Tanner （L-PTT） and Finitely Extensible Nonlinear Elastic （FENE-P） based constitutive equations were applied in two-dimensional Cartesian coordinates. The governing equations in transient and fully developed regions were solved using open source software called OpenFOAM. The flow patterns, including velocity profiles, shear stresses and first normal stress differences in some horizontal and vertical sections are illustrated. In addition, effects of the fluid type, flow dynamics and expansion ratio on the flow and vortex patterns in transient and fully developed regions are presented and discussed. The presented results show that existences of vortices cause the inverse velocity and negative stresses in expansion regions of the channel which increase with increment of expansion ratio and Weissenberg number （We）. Furthermore, some dead spaces can be observed at channel expansion regions close to the wall which are also increased. The results also show that at low We numbers all fluids show close behavior while at high We numbers the FENE-P fluid behavior shows high divergence from that of the two other fluids.     

Steric Effects in the Cl＋CHD3（v1=1） Reaction

A recent study has revealed a full 3-dimentional reactive scattering picture of the reaction CI＋CHD3（v1=1） as the C1 atoms attack CHD3 from various directions respective to the C-H stretching bond. The reported polarization-dependent differential cross sections provide the most detailed characterization of the influences of reagent alignments on reactivity. To convey the stereo-specific information more accessible to general chemists, we show here, by proper symmetry considerations, how to retrieve from the measurements the relative integral and differential cross sections of two most common collision geometries： the end-on versus side-on attacks. The results, albeit coarse-grained, provide an appealing picture that not only reinforces our intuition about chemical reactivity, but also sheds more light on the conventional （unpolarized） attributes.     

任意横截面柱形热斗篷研究与设计

基于变换热力学,导出了具有非共形任意横截面的柱形热斗篷热导率表达式,并在此基础上设计了具有非共形横截面的柱形热斗篷.全波仿真结果表明,热斗篷迫使外部热流绕过斗篷,导致隐身区域热通量为零,从而具有热保护功能;同时,热流绕过斗篷后将恢复原来的温度场分布,使其具有完美热隐身功能.此外,基于所导出的变换媒质热导率表达式,设计并求解了具有规则共形和非规则共形横截面的柱形热斗篷,发现它们同样具有热保护和完美热隐身功能.这表明通过选择适当的边界函数,所得变换媒质热导率表达式可用于设计任意横截面柱形热斗篷,具有普遍的适用性,这种技术在计算机芯片、卫星和航天器等的热保护中有潜在应用.     

流化床非球颗粒混合的形状效应研究

本文建立了横截面200 mm×200 mm,高1200 mm三维冷态流化床实验装置,实验研究非球颗粒形状效应对其混合特性的影响.针对异型颗粒外形差异和尺寸区别,分别设计两组实验,从固体废弃物颗粒特性方面研究其在流化床内的混合规律,重点考察了颗粒自身形状、尺寸对混合质量的影响,并结合颗粒混合动态过程进行研究.结果表明,颗粒球形度越大,在流化床内混合质量越好;密度较大的非球颗粒,其混合质量受形状影响更加明显;非球形颗粒种类增加,混合质量变差,流化气速的适当提高可改善混合质量;低密度非球颗粒及其混合物在床内混合表现出浮升组分特性,受形状影响不明显.     

Simulation and Optimization of Miniature Ring-Endcap Ion Traps

With the decrease in dimension of ion traps employed in optical frequency standards and precision spectroscopy, the sensitivity of trapping behavior to trap geometry is more and more prominent. We present a guide for the design and construction of a miniature trap for a single ion confinement, and propose an optimized combination of Tring/Tendcap ≈0.5 and z0≈ ro within the range of To = 0.7 ± 0.2 mm. Compared with the trap used by Huang et al. [Phys. Rev. A 84 （2011）053841], the design can lead to an increase in trap pseudo-potentiM of more than 20% and a reduction on potential anharmonicity of more than 90%. The improvements make the trap closer to an ideal hyperboloidal trap to confine a single ion tightly with the benefit of weaker micro-motion. Considering the imperfection of electrodes machining and traps Mignment, we also demonstrate the importance of trap symmetry, especially on two endcap electrodes.