任意二次型双曲面扁薄壳的基本解

本文对任意二次型双曲面扁薄壳的八阶偏微分方程采用平面波分解和小参数法导出了它的基本解。 在基本解的基础上,本文还得出边界为无限大时薄壳在集中荷载作用下的格林函数,适用于以边界积分方程法来分析具有任意边界条件的这类薄壳结构在任意荷载作用下的位移与内力,与一般有限单元法相比,它能较大的地节省计算机的内存和缩短分析时间。     

电子产品的模糊随机统计

电子产品,如电视机、收音机、录音机等,都是由成千上万个元器件组成的每一种元器件都有好或坏的问题.为了保证最终产品的质量,工厂从设计、生产到销售的各个环节,都有严格的质量管理制度,从而也日复一日、年复一年地进行着大量的统计.传统的统计方法和理论是建立在事件的随机性上的,但客观事物往往还有“模糊性”的一面. 一、模糊概率的概念 传统的概率论只研究事件的随机性.如某生产流水线的合格品率是99%,即任意抽取一件产品,有99%的可能抽到合格品.这里,“事件”是确定的。抽到合格品,但事件的出现与否是不确定的:有99%的可能出现,也有1%…     

单晶Cu(001)薄膜塑性变形的分子动力学模拟

使用分子动力学方法,模拟研究了单晶Cu(001)薄膜在双向等轴拉伸应变下的塑性变形行为.当应变超过一定值时,样品通过产生位错、层错及孪晶而发生塑性变形.当应变相对较低时,不全位错首先在薄膜表面形核并在密排面上滑移,留下堆积层错;当应变增加时,位错在表面与内部同时成核生长,层错数量也随之增加.分析了相邻滑移面上的位错之间相互作用形成孪晶的微观过程.材料内部形成大量堆积层错及孪晶后,较大孪晶的密排面上的原子也会发生滑移,形成孪晶内部的层错结构以释放残余应力.     

SiO2保护膜对高反膜激光损伤特性的改善

 为了研究高功率系统中高反膜的损伤机制,对高功率系统中最常用的基频高反膜进行了损伤实验。利用台阶仪、扫描电镜、表面轮廓仪等手段,对实验样品的典型损伤形貌进行了比较和分析。结果表明：保护膜的存在增强了样品的抗激光损伤能力;未加保护膜样品的典型破坏形貌是由材料热物特性差异导致的分层剥落损伤,这类损伤在后续的脉冲辐照下会迅速发展;有保护膜样品的典型破坏形貌是中心带有μm量级小坑的等离子体烧蚀损伤区,其主要是由缺陷受热力作用喷溅导致,小坑附近膜面的凸起是这种力学作用的宏观体现,这类损伤在后续的脉冲辐照中表现得相对比较稳定。保护膜的存在,在一定程度上抑制了分层剥落这种灾难性损伤的出现,改善了样品的损伤特性。     

Improving the precision of fluorescence lifetime measurement using a streak camera

Streak camera has high temporal resolution and high sensitivity, and is a powerful tool in biomedical study to measure fluorescence lifetime and perform fluorescence lifetime imaging. However, nonuniformity of the gain in the streak tube and nonlinearity of the sweeping speed limit the precision of fluorescence lifetime measurement, particularly when fluorescence lifetimes are short. We have constructed a two-photon excitation fluorescence lifetime measurement system that is based on a synchroscan streak camera and have developed accordingly a method to correct the effect of gain nonuniformity and nonlinearity of sweeping speed on the measurement precision. A continuous-wave laser of high stability is used to calibrate the gain of the streak camera, and a Fabry-Perot etalon is used to calibrate the nonlinearity of the sweeping speed. Fitting algorithms are used to correct the gain of the streak camera and nonlinearity of the sweeping speed respectively, which significantly improves the measurement precision of the system, as characterized through the fluorescence lifetime of the short-lived fluorescence dye, Rose Bengal. Experimental results show that the measurement fluctuation of the lifetime has been improved from more than 10% to 2% after correcting the effects of gain nonuniformity and sweeping speed nonlinearity.     

Laser Damage Mechanisms of Amorphous Ta2O5 Films at 1064, 532 and 355nm in One-on-One Regime

Ta2O5 films are deposited on fused silica substrates by conventional e-beam evaporation. Surface topography and chemical composition are examined by atomic force microscopy （AFM） and x-ray photoelectron spectroscopy （XPS）. The calculation of electron structures of Ta2O5 and Ta2O5-x is attempted using a first-principle pseudopotential method within the local density approximation. The laser-induced damage threshold （LIDT） is performed at 1064, 532 and 355 nm in 1-on-1 regime, respectively. The results show that the LIDT increases with the wavelength increasing, which is in agreement with the wavelength effect. However, the LIDT results are not consistent with the empirical equation （I（λ）=aλm）, which may be attributed to the intrinsic absorption of Ta2O5 at the wavelengths of 532 or/and 355 nm. Moreover, different damage morphologies are observed when the films are irradiated at different wavelengths. It is concluded that the laser damage at 1064 nm is the defect dominant mechanism and at 355 nm it is the intrinsic absorption dominant mechanism, whereas at 532 nm it is the combined defect and intrinsic absorption dominant mechanism.     

基于CPS模型的高中物理校本课程教学研究——以“中学物理与现代前沿应用”校本课程为例

为了填补国家课程物理课堂教学中核心素养落实的不足,尝试在物理学科类校本课程教学过程中融入核心素养,并重点突出创新实践能力,在基于CPS模型的《中学物理与现代前沿应用》这门校本课程的教学实施过程中,既能与常规物理课堂紧密联系,又始终立足于学生自主发展,为学生创新能力的提升以及个性化发展创设了丰富的机会,取得了比较明显的成效,积累了一定的经验.     

微量Co修饰的碳载超细Pt纳米粒子的制备及其在燃料电池氧还原催化中的应用

质子交换膜燃料电池(PEMFC)具有清洁、高效等优点,是一种理想的汽车动力电源.然而,由于其阴极氧还原反应(ORR)速率缓慢,需要使用大量的Pt基催化剂,导致燃料电池成本居高不下,严重制约了PEMFC的商业化发展.将Pt与过渡金属Fe, Co, Ni等形成合金,对表面Pt原子的几何结构和电子结构进行调变,可以有效提高催化剂的活性,实现Pt用量和燃料电池成本的降低.但是目前合金催化剂多采用溶剂热、浸渍-高温退火等制备方法,使用有毒有害试剂和难清洗的表面活性剂,且过程复杂、能耗高,不利于大规模化生产.此外,合金中过渡金属占比高,在燃料电池工况下,大量过渡金属溶解,加速了膜的降解,导致实际PEMFC性能的降低.对此,我们探索了一种简便有效的方法制备高活性、高稳定性的碳载Pt-Co催化剂.在没有添加表面活性剂的情况下,采用硼氢化钠辅助乙二醇还原法合成了具有超小尺寸和均匀分布的Pt-Co纳米颗粒,后续酸刻蚀处理去除不稳定的Co原子,重组双金属纳米颗粒的表面结构形成富Pt壳层,进一步提高了催化剂的活性和稳定性.通过电感耦合等离子体、X射线粉末衍射、透射电子显微镜、高分辨透射电子显微镜、高角环形暗场-扫描透射-元素分布及光电子能谱等物理表征证实了微量Co改性的碳载超细铂合金纳米颗粒的组成和结构.进一步对催化剂进行旋转圆盘电极和单电池测试,结果表明, Pt_(36)Co/C具有明显高于商业化Pt/C的有效电化学活性面积和电池性能.此外,加速衰减测试和衰减前后的电镜图片表明, Pt_(36)Co/C催化剂的稳定性相较于Pt/C亦有所增强.分析Pt-Co/C催化性能提高的原因,主要归于以下三点:(1)催化剂纳米颗粒在载体上分布均匀,且具有超小的粒径尺寸,提供了大量的三相反应界面位点;(2)双金属配体和电子效应的协同作用,降低了氧化物质在催化表面的吸附能力,加速了ORR的电催化动力学;(3)酸蚀刻导致的不稳定Co的溶解及催化剂表面结构的重排,形成了富Pt壳层结构,有利于提高催化剂的稳定性.这种简单有效的合金制备方法可以在电催化领域推广使用.     

Centrality dependence of pT spectra for identified hadrons in Au+Au and Cu+Cu collisions at √sNN= 200GeV

The centrality dependence of transverse momentum spectra for identified hadrons at midrapidity in Au+Au collisions at √s_NN= 200GeV is systematically studied in a quark combination model. The p_T spectra of π^±, K^±, p(p) and Λ(Λ) in different centrality bins and the nuclear modification factors (R_CP) for these hadrons are calculated. The centrality dependence of the average collective transverse velocity 〈β(r)〉 for the hot and dense quark matter is obtained in Au+Au collisions, and it is applied to a relative smaller Cu+Cu collision system. The centrality dependence of p_T spectra and the R_CP for π⁰, K_s⁰ and Λ in Cu+Cu collisions at √s_NN= 200GeV are well described. The results show that 〈β(r)〉 is only a function of the number of participants N_part and it is independent of the collision system.