A multi-axial, multimechanism based constitutive model for the comprehensive representation of the evolutionary response of SMAs under general thermomechanical loading conditions

We present a fully general, three dimensional, constitutive model for Shape Memory Alloys (SMAs), aimed at describing all of the salient features of SMA evolutionary response under complex thermomechanical loading conditions. In this, we utilize the mathematical formulation we have constructed, along with a single set of the model’s material parameters, to demonstrate the capturing of numerous responses that are experimentally observed in the available SMA literature. This includes uniaxial, multi-axial, proportional, non-proportional, monotonic, cyclic, as well as other complex thermomechanical loading conditions, in conjunction with a wide range of temperature variations. The success of the presented model is mainly attributed to the following two main factors. First, we use multiple inelastic mechanisms to organize the exchange between the energy stored and energy dissipated during the deformation history. Second, we adhere strictly to the well established mathematical and thermodynamical requirements of convexity, associativity, normality, etc. in formulating the evolution equations governing the model behavior, written in terms of the generalized internal stress/strain tensorial variables associated with the individual inelastic mechanisms. This has led to two important advantages: (a) it directly enabled us to obtain the limiting/critical transformation surfaces in the spaces of both stress and strain, as importantly required in capturing SMA behavior; (b) as a byproduct, this also led, naturally, to the exhibition of the apparent deviation from normality, when the transformation strain rate vectors are plotted together with the surfaces in the space of external/global stresses, that has been demonstrated in some recent multi-axial, non-proportional experiments.     

人造柱状冰特性的研究

由于地形的变化,冰特性的研究对研究冰川、河、湖、海冰的动力过程以及破冰均有重要意义.本文对人造柱状冰的特性进行研究和分析,给出了人造柱状冰的制备过程和利用压力试验机对人造冰特性进行的测定,主要包括冰冻模具的制作、冰试样的制备和加工以及对于纯水冰柱和含沙冰柱的特性研究.在冰柱的冰冻温度为-10℃、-20℃、-30℃和-4...     

撞击载荷下Nomex蜂窝夹芯梁的变形模式研究

本文研究了Nomex蜂窝夹芯结构在不同冲量下的变形模式和失效模式.实验采用子弹撞击的加载方式,对Nomex蜂窝夹芯梁施加大小不同的冲量,使用激光位移传感器测量每个试件后蒙皮的变形位移.分析了同芯层厚度,不同蒙皮厚度的Nomex蜂窝夹芯梁在不同冲量作用下抵抗变形的能力,以及冲量大小与蒙皮厚度对夹芯梁抵抗撞击能力的影响,计算分析了蒙皮与芯层的吸能性.实验结果表明:增加蒙皮的厚度能够改善夹芯梁在撞击荷载下抵抗变形的能力,在撞击过程中芯层吸收了50％左右的能量,且冲量越大,芯层吸收的能量越多.     

Thermal loading induced near-infrared broadband upconversion emission of Sm-doped β-NaYbF4 nano-phosphors

A non-closed hydrothermal synthetic processing is improved to synthesize Sm³⁺ doped β-NaYbF₄ nano-phosphors at 98 °C without any high-temperature and high-pressure treatments as a final step. Novel green, red, and near-infrared broadband (799-873 nm) upconversion emissions of Sm³⁺-doped β-NaYbF₄ nano-phosphors under 980 nm excitation are observed. These UC emissions can be assigned to the Sm³⁺ transitions of ⁴G_J, ⁴F_3/2 and ⁶F_11/2→⁶H_J. The half-width of 873 nm emission band is broadened nearly two-fold through the annealing treatment for nano-phosphors. The upconversion process in Yb³⁺-Sm³⁺ system is discussed based on energy transfer mechanisms.     

Correlation between microstructure and property of electroless deposited Pt counter electrodes on plastic substrate for dye-sensitized solar cells

Flexible Pt counter electrodes (CEs) were prepared on indium-doped tin oxide coated polyethylene naphthalate (ITO-PEN) substrate by electroless deposition. The correlation between the microstructure and the property of the Pt CEs was investigated. Results showed that isolated Pt nanoparticles were uniformly distributed on the ITO surface at a short deposition duration, and then grew with the deposition duration, leading to the interconnection of adjacent Pt nanoparticles. The interconnection of Pt nanoparticles was beneficial to the electrical property of the Pt CEs, while it was unfavorable to the electrocatalytic property of the Pt CEs. A microstructure model was proposed to explain the correlation between the microstructure and the property of the Pt CEs. In addition, the Pt CEs showed low charge transfer resistance (1.66-0.58 Ω cm²), which was comparable to that (1.16 Ω cm²) of the conventional sputtered Pt CE. The high electrocatalytic property of the electroless deposited Pt CEs makes the assembled DSCs present comparable energy conversion efficiency of the DSCs using sputtered Pt CE.     

PEG接枝氧化石墨烯的制备与细胞成像

通过酯化反应将不同分子量的聚乙二醇(PEG)接枝到氧化石墨烯(GO)表面,得到系列GO-PEG。利用傅里叶变换红外光谱(FTIR)、拉曼光谱(Raman)、扫描电子显微镜(SEM)对GO-PEG的结构和形貌进行了表征,用热重分析(TGA)测定了GO-PEG中PEG的接枝量。SEM结果表明GO-PEG的剥离程度高于GO。GO-PEG在磷酸盐缓冲溶液中具有良好的分散稳定性,稳定性与接枝量呈正相关。GO-PEG通过非共价键合作用对荧光素(Flu)的负载量可达1.75 mg·mg-1,且负载量受接枝量影响;另外,GO-PEG对Flu的释放行为具有pH值触发药物释放性能。将接枝PEG的端羟基与Flu共价键合,所得GO-PEG6000-Flu荧光探针实现了对HepG2细胞的成像。     

Effect of mobile phase anionic additives on selectivity,efficiency, and sample loading capacity of cationic drugs in reversed-phase liquid chromatography

In the present work, we study the effect of mobile phase anionic additive type and concentration on the selectivity, efficiency, and sample loading capacity of cationic drugs in reversed-phase liquid chromatography (RPLC). The type and concentration of an anionic additive are known to have a strong effect on the absolute retention of cations in RPLC; in contrast they have only a small effect on the selectivity of one cation relative to a second as seen here. This is mainly due to the similarity of the ion pair formation constants between the selected cations. The limiting retention factors of cations (i.e. the retention factor of the fully ion-paired analyte at very high additive concentration) are roughly proportional to their inherent hydrophobicities (i.e. the retention factor of the analyte in the absence of the anionic additive). With a given anion, differences in ion pairing strength between the solutes are required for effective selectivity adjustment. Based on the Wade–Lucy–Carr (W–L–C) kinetic model of overload peaks, the approach we developed in our previous work was used to study the effect of mobile phase anionic additives type and concentration on the limiting plate count (N₀) and sample loading capacity (ω_0.5) of various cationic drugs. Under linear chromatographic conditions, where the analyte exhibits its smallest peak width and thus maximum apparent plate count, the type and concentration of anionic additives have almost no effect on peak width. In comparison to neutral analytes the sorption isotherms of cationic species are very easily overloaded even when many fewer moles of cations as compared to neutrals are injected. We showed that different anionic additives profoundly affect the cations’ “overload profiles” (i.e. plots of plate count versus amount injected) by changing the sample loading capacities. The increase in sample loading capacities with different anions show the same order as the extent of ion pairing between the anions and the basic analytes. The detrimental effect of sample overloading on peak width can be greatly diminished by using either a stronger ion pairing agent or a higher concentration of a given ion pairing agent. Both effects operate by increasing the sample loading capacity, thereby allowing more solute to be injected. We believe that the increase in sample loading capacity described above is due in part to the increase in the number of ion-exchange sites as more anions sorb to the stationary phase. At the same time, the formation of a neutral ion-paired analyte also increases the amount of cation which can be loaded onto the stationary phase by allowing a greater fraction of the analyte to be present in the stationary phase as an electrically neutral (i.e. ion-paired) species.     

Fracture characteristics of concrete subjected to impact loading

This paper takes concrete as a four-phase composite made of the intact matrix and three mutually perpendicular groups of penny-shaped micro-cracks. The intact matrix is assumed to be elastic,homogeneous and isotropic,and the micro-cracks are penny-shaped. Combined with the failure mechanism of concrete subjected to impact loading,a dynamic constitutive model for concrete is developed based on Mori-Tanaka's average stress concept and Eshelby's equivalent inclusion theory. Experimental results show that concr...     

Elastodynamic analysis of a thin layer bonded on a visco-elastic medium under combined in-plane and lateral pulse loads

An analytic solution of a thin layer bonded on a visco-elastic medium under the action of in-plane and lateral pulse loads is presented. The analysis is based on double integral transforms with respect to space and time. Representative examples are studied and discussed to determine the influence of the (a) damping and elastic coefficients of visco-elastic medium, and (b) in-plane compression and stretching of the thin layer on wave propagation.