Experimental and Theoretical Study of NiII- and PdII-Promoted Double Geminal C(sp3)−H Bond Activation Providing Facile Access to NHC Pincer Complexes: Isolated Intermediates and Mechanism

We report the first examples of metal-promoted double geminal activation of C(sp³)−H bonds of the N−CH₂−N moiety in an imidazole-type heterocycle, leading to nickel and palladium N-heterocyclic carbene complexes under mild conditions. Reaction of the new electron-rich diphosphine 1,3-bis((di-tert-butylphosphaneyl)methyl)-2,3-dihydro-1H-benzo[d]imidazole ( 1 ) with [PdCl₂(cod)] occurred in a stepwise fashion, first by single C−H bond activation yielding the alkyl pincer complex [PdCl(PC ^HP)] ( 3 ) with two trans phosphane donors and a covalent Pd−C bond. Activation of the C−H bond of the resulting α-methine C H−M group occurred subsequently when 3 was treated with HCl to yield the NHC pincer complex [PdCl(PC^NHCP)]Cl ( 2 ). Treatment of 1 with [NiBr₂(dme)] also afforded a NHC pincer complex, [NiBr(PC^NHCP)]Br ( 6 ), but the reactions leading to the double geminal C−H bond activation of the N−CH₂−N group were too fast to allow identification or isolation of an intermediate analogous to 3 . The determination of six crystal structures, the isolation of reaction intermediates and DFT calculations provided the basis for suggesting the mechanism of the stepwise transformation of a N−CH₂−N moiety in the N−C^NHC−N unit of NHC pincer complexes and explain the key differences observed between the Pd and Ni chemistries.     

用均根拓扑指数与路径数预测链烷烃的沸点和热力学性质

以距离矩阵为基础，建构调和均根拓扑指数（K），以表征链烷烃分子的大小 和分支情况，85种链烷烃的沸点(T_b)、标准生成焓(Δ_rH_m~θ)、标准熵(S_m~θ )、标准生成自由能(Δ_fG_m~θ)与K及路径数(P_2, P_3)的回归方程为: ln(793- T_b) = 6.48346-0.10092K + 0.00131P_2-0.01110P_3, R = 0.9996; -Δ_fH_m~θ = 62.664 + 25.331 K + 6.597 P_2 - 0.678 P_3, R = 0.9984; S_m~θ = 170. 691 + 67.425 K - 4.712P_2 + 5.251 P_3, R = 0.9989; Δ_fG_m~θ = -45.677 + 10.060 K + 0.555 P_2 + 2.342P_3, R = 0.9935。它们的计算值与相应实验值 都非常吻合。结果表明，K对链烷烃具有良好的结构选择性和性质相关性。     

Selective skeletal isomerization of alkanes over partially reduced MoO<Subscript>3</Subscript>

The surface area and the pentane isomerization activity of Pt/MoO₃ were enlarged by H₂ reduction. The enlargements was observed only when the reduction proceeded through the formation of hydrogen molybdenum bronze, H_xMoO₃. The catalytic activities of H₂-reduced MoO₃ with different noble metals for pentane isomerization and 2-propanol dehydration depended on the ability of noble metal to produce the H_xMoO₃ phases. H₂-reduced Pt/MoO₃ was more active for pentane isomerization than Pt/H, and its activity was comparable to that of Pt/HZSM-5. In heptane isomerization, H₂-reduced Pt/MoO₃ exhibited a lower activity than Pt/H, although heptane was isomerized very selectively. Strong adsorption of heptane onto H₂-reduced Pt/MoO₃ is likely to be a reason for its lower heptane isomerization activity.     

The effect of the conditions of the photocatalytic carbonylation of pentane catalyzed by the Rh2Cl2(CO)4-PMe3 system on the yield of C6-aldehyde

The yield of C₆-aldehyde in the photocatalytic system Rh₂Cl₂(CO)₄-PMe₃ passes through a maximum as the CO pressure and PMe₃ concentration increase. The increase in the yield of aldehydes with increasing CO pressure is related to the increase in the carbonylation rate and to the retardation of the photodecomposition of the aldehydes. The rate of the photocatalytic carbonylation of pentane in this system is 20 times higher than in the presence of RhCl(PMe₃)₂(CO).Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1013–1015, June, 1994.     

应用分子电性距离矢量预测烷烃和一元醇的折光指数

应用分子电性距离矢量对81个烷烃、22个一元醇进行了结构表征,通过多元线性回归与逐步回归的方法建立了分子电性距离矢量与折光指数的定量结构性质模型,模型的相关系数分别为0.980和0.979.采用留一法对模型进行交互检验复相关系数R2cv分别为0.927和0.898.说明定量结构性质模型具有很好的稳定性和预测功能.     

重烷基苯磺酸盐的界面性质和驱油机理

重烷基苯磺酸盐是在三次采油中广泛采用的表面活性剂之一，但重烷基苯原料组成复杂导致最终磺化产物的驱油效果差异很大.实验通过柱层析的方法将重烷基苯分离成6个族组分，并对其中的二烷基苯、单烷基苯和二烷基茚萘满、烷基萘、多苯烷进行磺化，中和提纯后对各磺酸盐进行界面张力测定.通过对比不同矿化度下界面张力以及各组分复配后的界面张力，对原油等效烷烃数(EACN)以及各组分碳数最低值(nmin)测定，得出各组分之间协同效应的规律和复配机理，从而阐明了重烷基苯磺酸盐的驱油机理.通过研究十二烷基苯磺酸钠(LAS)与各组分之间的复配作用对上述规律和机理进行了进一步验证.     

Excess enthalpies of mixtures containing n-heptane,methanol and methyl tert-butyl ether (MTBE)

Molar excess enthalpies H ^E have been measured for the binary mixtures MTBE+methanol, MTBE+n-heptane and methanol+n-heptane using a quasi-isothermal flow calorimeter. The measurements have been performed at atmospheric pressure and at 25 and 40°C for all the mixtures and for MTBE+methanol also at 50°C. The experimental results for MTBE methanol and MTBE+n-heptane are compared with those calculated using the NRTL equation.Communicated at the Festsymposium celebrating Dr. Henry V. Kehiaian's 60^th birthday, Clermont-Ferrand, France, 17–18 May 1990     

不同温度予处理Pt／Al2O3催化剂对其表面结构和反应性能的影响

由于链烷烃在Pt/Al_2O_3催化剂上反应的复杂性,许多学者为了深入研究包括催化剂制备、反应机理等的内在规律,进行了大量的研究,取得了许多重要成果。近几年来,较多的工作着重从分散态金属的几何和电子因素,及金属同担体的相互作用进行考察,在催化剂制备方面,更多的注意添加第2、第3组元、杂质或毒物等对金属催化性能的调变作用,以期开发出高选选择性催化剂。而对不同气氛、不同还原温度下     

高硅分子筛ZSM-23催化裂解C4烷烃制乙烯丙烯的研究

采用廉价的硅溶胶作为硅源,吡咯烷为模板剂,静态水热晶化法合成出不同硅铝比的ZSM-23分子筛.采用XRD,SEM,吡啶吸附红外光谱等技术,对合成的ZSM-23分子筛的结构、形貌、表面酸性质进行了表征.并进行了所制样品对C4烷烃催化裂解制乙烯丙烯反应催化性能的研究.本文详细考察了硅铝比、反应温度、反应空速以及催化剂稳定性等各种因素对催化性能的影响.结果表明,ZSM-23分子筛的乙烯丙烯收率达到56.0%,丁烷转化率达到88.9%.     

一种基于数据挖掘的计算机自动识别饱和脂肪烃的方法

通过对Nist107标准物质中饱和脂肪烃的质谱数据进行挖掘,发现了新的饱和脂肪烃的谱图特征。利用这些特征设置分步问答,使用MatLab编程实现并优化建立了自动识别饱和脂肪烃的方法。利用库内分子量小于450的标准质谱数据和本实验室测定的齿叶铁线莲(根)挥发油数据进行检验。库内检验结果表明:第一类错误(弃真错误)率为0.503%,第二类错误(存伪错误)率为0.008%。正构烷烃的误识率为0。实验数据验证结果表明:此法能准确识别饱和脂肪烃,用于识别正构烷烃时可克服因夹角余弦相似匹配中相似度接近而无法正确定性的缺点,为植物挥发成分测定、汽油样品的PONA分析和空气颗粒物中饱和脂肪烃的识别和总量的测定提供了一种新的快速的方法。