弹塑性板壳结构非线性有限元分析

本文根据塑性流动理论的基本公式，由隐式积分导出了与路径无关的变量更新算法和一致切线模量。采用单元广义应力应变直接离散塑性流动定律，构造了杂交应力单元一致切线刚度矩阵的显式表达式，编制了结构有限元程序ＳＡＦＥ，数值算例表明：本文的计算方法和计算程序是正确可靠的，可用于弹塑性板壳结构的非线性分析，计算结果屈曲临界载荷和极限承载能力。     

一种用于计算板中缺陷兰姆波散射的混合边界元法

本文介绍了一种将传统边界元法和兰姆波的本征模式函数相结合的混合边界元法，用此方法解决兰姆波在板材中传播时遇到缺陷发生的散射问题，计算了兰姆波通过缺陷后的反射与透射系数。文中给出了若干兰姆波信号幅度与板中不同深度缺陷的相互关系。     

非均匀弹性支承Reissner板分析的域外奇点法

本文基于Ｒｅｉｓｎｅｒ厚板理论，采用域外奇点法分析了非均匀弹性支承的厚板该法能方便地应用于工程计算中，处理诸如筏形基础筏板、桩数较多的桩基承台和高层建筑转换厚板等工程问题     

肋板系肋的抗扭刚度对抗弯刚度的贡献

本文从理论上对肋板系肋的抗扭刚度对抗弯刚度的贡献给以证明.它使文献[1]采用的正交构造异性板刚度的实用算法有了依据.尤其无内横肋的肋板系桥跨计算时,需计入该贡献.     

混合状态Hamiltonian元的半解析解和叠层板的计算

本文给出混合状态方程的一种强有力的半离散半解析解法,并给出了矩形域和叠层板的算例,讨论了可能的发展和应用。     

EFFECT OF VERTICAL BAFFLES ON PARTICLE MIXING AND DRYING IN FLUIDIZED BEDS OF GROUP D PARTICLES

This study reports the effect of vertical baffles on the group D powder mixing and drying characteristics in a batch fluidized bed dryer. Results obtained in this study showed that operating the fluidized bed dryer with vertical baffles gave better particle mixing. This is due to the fact that the vertical baffles acted to limit the growth of small bubbles into large bubbles and the small bubbles caused more vigorous mixing in the bed of particles before finally erupting at the bed surface. Thus, insertion of vertical baffles is a useful way to process group D particles in a fluidized bed, especially when the fluidized bed is large.     

多孔饱和半空间上刚体垂直振动的轴对称混合边值问题

研究圆柱形刚体在多孔饱和半空间上的垂直振动．首先应用Ｈａｎｋｅｌ变换求解多孔饱和固体的动力基本方程———Ｂｉｏｔ波动方程．然后按混合边值条件建立多孔饱和半空间上刚体垂直振动的对偶积分方程，用Ａｂｅｌ变换化对偶积分方程为第二类Ｆｒｅｄｈｏｌｍ积分方程．文末给出了多孔饱和半空间表面动力柔度系数的计算曲线．     

阶梯圆形和环形薄板的大幅度基础振动

利用修正迭代法求出了具有多个阶梯厚度圆形和环形薄板轴对称大幅度自由振动的一种新的解析解，导出了振幅和非线性振动基频的解析关系式，给出了较完善的数值计算结果，所得结果可供工程设计时参考。     

静载荷作用下柔韧圆板的大幅度振动

本文首先给出了均布载荷作用下柔韧圆板的大幅度振动方程，按文中给出的时间模态假设导了该问题的非线性耦合的代数和微分特征方程组，利用修正迭代法求出了该方程组的近似解析解，得到了柔韧圆振动的幅频－载荷特征关系，讨论了静载荷对其振动性态的影响。     

ANALYTICAL EVALUATION OF PERMANENT DEFLECTION OF A THIN CIRCULAR PLATE STRUCK NORMALLY AT ITS CENTER BY A PROJECTILE

The permanent deflection of a thin circular plate struck normally at its center by a projectile is studied by an approximate theoretical analysis,FEM simulation and experiment.The plate made of rate sensitive and strain-hardening material undergoes serious local deformation but is not perforated during the impact.The theoretical analysis is based on an energy approach, in which the Cowper-Symonds equation is used for the consideration of strain rate sensitive effects and the parameters involved are determined with the aid of experimental data.The maximum permanent deflections predicted by the theoretical model are compared with those of FEM sim- ulation and published papers obtained both by theory and experiment,and good agreement is achieved for a wide range of thickness of the plates and initial impact velocities.