ANALYSIS ON THE MAGNETO-ELASTIC-PLASTIC BUCKLING/SNAPPING OF CANTILEVER RECTANGULAR FERROMAGNETIC PLATES

An analysis of buckling/snapping and bending behaviors of magneto-elastic-plastic interaction and coupling for cantilever rectangular soft ferromagnetic plates is presented.Based on the expression of magnetic force from the variational principle of ferromagnetic plates,the buckling and bending theory of thin plates,the Mises yield criterion and the increment theory for plastic deformation,we establish a numerical code to quantitatively simulate the behaviors of the nonlinearly multi-fields coupling problems by the finite element method.Along with the phenom- ena of buckling/snapping and bending,or the characteristic curve of deflection versus magnitude of applied magnetic fields being numerically displayed,the critical loads of buckling/snapping, and the influences of plastic deformation and the width of plate on these critical loads,the plastic regions expanding with the magnitude of applied magnetic field,as well as the evolvement of deflection configuration of the plate are numerically obtained in a case study.     

正交各向异性压磁电弹性矩形板的稳定问题

从压磁电弹性力学的三维平衡方程和本构关系出发,推导得到了正交各向异性压磁电弹性矩形板稳定问题的状态方程。求解状态方程并结合边界条件得到了稳定问题的屈曲方程。给出了临界应力的算例。     

割口单向叠层板的拉伸应力集中与强度

基于剪滞理论,建立一种分层剪滞模型,分析了含割口的单向叠层板在拉伸载荷作用下的应力重新分布问题,获得了割口前缘完整纤维的应力集中因子.在此基础上,采用细观统计破坏理论,研究了割口单向叠层板的拉伸破坏强度,得到了与现有实验较吻合的结果.     

粘弹性基支粘弹板轴对称问题的动力响应

本文讨论粘弹性半空间地基上粘弹性圆板受轴对称载荷时的动力响应,将问题化为在Laplace变换空间中的第一类Fr积分方程,通过数值解和进行数值逆变换求得问题的解答。     

NONLINEAR VIBRATION OF CIRCULAR SANDWICH PLATES UNDER CIRCUMJACENT LOAD

Based on von Karman plate theory, the issue about nonlinear vibration for circular sandwich plates under circumjacent load with the loosely clamped boundary condition was researched. Nonlinear differential eigenvalue equations and boundary conditions of the problem were formulated by variational method and then their exact static solution can be got. The solution was derived by modified iteration method, so the analytic relations between amplitude and nonlinear oscillating frequency for circular sandwich plates were obtained. When circumjacent load makes the lowest natural frequency zero, critical load is obtained.     

圆板承受一般轴对称分布载荷的解析计算方法

 运用泰勒级数方法, 可计算圆板和圆环形板承受 不光滑, 不连续轴对称分布载荷的问题.     

Modeling the interaction of solitary waves and semi-circular breakwaters by using unsteady reynolds equations

A vertical 2 -D numerical wave model was developed based on unsteady Reynolds equations. In this model, the k-epsilon models were used to close the Reynolds equations, and volume of fluid( VOF) method was used to reconstruct the free surface. The model was verified by experimental data. Then the model was used to simulate solitary wave interaction with submerged, alternative submerged and emerged semi-circular breakwaters. The process of velocity field, pressure field and the wave surface near the breakwaters was obtained. It is found that when the semi-circular breakwater is submerged, a large vortex will be generated at the bottom of the lee side wall of the breakwater ; when the still water depth is equal to the radius of the semi-circular breakwater, a pair of large vortices will be generated near the shoreward wall of the semi-circular breakwater due to wave impacting, but the velocity near the bottom of the lee side wall of the breakwater is always relatively small. When the semi-circular breakwater is emerged, and solitary wave cannot overtop it, the solitary wave surface will run up and down secondarily during reflecting from the breakwater. It can be further used to estate the diffusing and transportation of the contamination and transportation of suspended sediment.     

有初内力的板的内共振

本文利用非线性时空有限方法和样条有限元技术对具有初内力的板的非线性频响特性进行了分析，计算了在不同初始内力下方板的大振幅自由振动、有阻尼强迫振动和矩形板的内共振。     

微幅振荡流体表面波图谱显示方法

本文介绍一种能够清晰显示微幅高频振荡的流体表面波图谱结构的方法和产生高达１００Ｈｚ频率、波幅为毫米以下的流体表面波的实验装置，即改进了ＦＡＲＡ－ＤＡＹ实验装置。用本实验装置和显示方法获得了精美的波幅图，并就几种波图作了简要说明。     

叠层靶板弹击实验及弹道侵彻机理的数值模拟研究

为了提高军盔等防护装备的防弹性能,采用非线性动态显式有限元分析软件ANSYS/LS DYNA5.6.1模拟了几种复合材料防弹靶板的抗弹道侵彻过程,弹头采用标准1.1g模拟弹片。结合v50弹击实验分析了靶板在此类弹击下的破坏机理和吸能方式,对靶板的选材、铺层顺序、层数和制造工艺等提出合理化建议,主要是沿靶板厚向应采用非均匀的三段式结构和工艺。