一种模拟沸石分子筛扩散反应的Monte Carlo方法

在考虑了沸石分子筛中吸附、脱附、扩散和反应的特点的基础上，发展了一种模拟沸石分子筛中扩菜反应的ＭｏｎｔｅＣａｒｌｏ方法。用Ｌａｎｇｍｕｉｒ吸附等温式验证了该方法的合理性，并证明了轰击频率λ代表了反应物气相压力，而吸附、脱附几率之比即为吸附平衡常数。同时，通过改变轰击频率λ和反应几率Ｐｔ，得到了吸附等温线和有效因子随Ｔｈｉｅｌｅ模数变化的曲线。     

低热固相反应的反应机理研究(1)--冷融熔机理和冷溶熔机理的模型

本文提出了低热固相反应的冷融熔机理和冷溶熔机理,其中冷融熔机理主要针对于不含结晶水的反应体系,冷溶熔机理主要针对于含结晶水的反应体系,并对低热固相反应动力学提出冷融熔/冷溶熔、扩散、反应、成核、生长的五步机理.两种机理都避开了分子在固相晶格中的扩散,从而对低热固相反应的扩散问题进行了有效的解释,并给出了低热固相反应的热力学和动力学判据.     

一个新颖三维配位聚合物Pb(1，4-napdc)(DMF)的合成、结构及热稳定性研究

A novel 3D metal-organic coordination polymer Pb(1,4-napdc)(DMF) (1,4-napdc=naphthalene-1,4-dicarboxylate) was synthesized at room temperature using slow vapor diffusion method to grow single crystal that has been analyzed by X-ray diffraction. The crystal belongs to orthorhombic with space group P2₁2₁2₁. The unit cell parameters are as fellows: a=0.701 3(2) nm, b=1.407 6(3) nm, c=1.521 5(4) nm, V=1.501 8(6) nm³ and Z=4. In the crystal structure of Pb(1,4-napdc)(DMF), the square grids constructed with paddle-wheel units of Pb(Ⅱ) and 1,4-napdc links stack over each other to generate infinite 3D network, which has square apertures (1.158×1.158 nm²) along the crystallographic a-axis. The thermal stability of compound was investigated by differential scanning calorimetry and thermogravimetric analysis. CCDC: 293617.     

室温熔盐二(三氟甲基磺酸酰)亚胺锂-尿素体系的分子动力学模拟

应用分子动力学模拟了25 ℃和50 ℃时新型室温熔盐二(三氟甲基磺酸酰)亚胺锂[LiN(SO2CF3)2, LiTFSI]与尿素(摩尔比为1:3.6)体系的结构与动力学性质. 在两个温度下体系的微观结构基本相同, Li+的配位数约为5, 且都是与溶剂和阴离子中的氧原子发生配位. 对TFSI-的研究表明, 每个TFSI-只提供四个氧中的一个与Li+配位; 而且在Li+的配位层中, TFSI-具有顺、反和gauche 等不同的构象, 并且不同构象出现的几率会随着温度的改变而改变.     

带电胶体离子扩散与交换动力学的比较

Taking soil colloid and hydrated silica (quartz sand) as the experimental material, the comparative study has been made on the kinetics of ion diffusion and ion exchange in charged colloid and charged coarse disperse systems. The results showed that ion exchange kinetics in the two systems conform to the kinetic law of ion diffusion. Besides, through this comparative study on the kinetics of ion exchange and ion diffusion, a method has been advanced theoretically to estimate the quantity of adsorbed ion that is located in the inner of the Helmholtz layer. As far as hydrated silica is concerned , there were about 33 per cent of the total adsorbed quantity of Mg2+that were located in the inner of the Helmholtz layer under the given experimental conditions, bu tfor soil colloid the percentage was only 7.5.     

聚乙撑二氧噻吩膜在氧化态的充电过程及电容研究

In this paper, the chronoamperometry was used to study the charging processes of polyethylenedioxythiophene (PEDOT) modified electrodes in the potential range where PEDOT was in the oxidized state. The results show that the charging behaviors of the PEDOT films are well agreed with the exhausted finite diffusion model. The dependence of the capacitance values of the films on potential and concentration of solution was also studied in this potential range.     

铌酸锂单晶光纤包层研究

通过镁离子内扩散铌酸锂单晶光纤，以改变晶纤表层的折射率，首次在国内实现了沿不同轴向生长、不同掺杂的铌酸锂单晶光纤的芯－包层波导结构。通过匹配扩散温度、扩散时间、ＭｇＯ膜厚等扩散参数及选择合适的晶纤直径，实现了晶纤具有阶跃和抛物折射率分布的包层，并对包层晶纤的模式特性进行了观察，得到低次模传输。     

利用湿法反应制备的LiV3O8的锂离子扩散特性

利用V2O5•nH2O湿凝胶和Li2CO3作原料,通过溶液反应和低温焙烧的方法合成了用于锂离子电池正极的LiV3O8.对其前驱体和产品分别进行DTA-TG、XRD表征.LiV3O8用作锂离子电池正极的电化学性能利用恒电流充放电测试进行研究.实验表明活性材料LiV3O8具有较高的充放容量和良好的循环性能.LiV3O8电极的锂离子化学扩散系数由恒电位间歇滴定技术(PITT)来确定，其值依据Li1＋xV3O8中x值的不同在10－8～10－10 cm2•s－1的变化范围内.获得的锂离子的扩散活化能为：Ea=25～42 kJ•mol－1(x=0.18～2.5).认为锂离子扩散的最大活化能是由锂离子在Li4V3O8相中的扩散决定的.     

反应性复合乳液的合成、表征及其交联反应

利用种子半连续乳液聚合方法合成了核层或壳层带有环氧基以及壳层带有羧基的3种不同核/壳结构的乳胶粒子,通过物理共混带环氧基和羧基的乳胶粒子,得到了两种反应性复合乳液.利用透射电镜和激光动态光散射对乳胶粒子进行了表征,其粒径分布较窄,粒径分布的多分散系数为0.062,平均粒径约76 nm,乳胶粒子具有明显的核/壳结构.通过胶膜的凝胶率和膨胀率的测定和红外光谱分析对反应性复合乳液中乳胶粒子的扩散及交联反应进行了研究,并探讨了不同核壳结构复合乳液对涂膜机械性能的影响.研究表明,当反应性复合乳液中的环氧基和羧基分别分布在乳胶粒子的核层和壳层时,有利于聚合物分子链的充分扩散和化学交联反应的进行,从而提高涂膜的物理化学性能,当甲基丙烯酸缩水甘油酯(GMA)含量为10 wt%时,涂膜的拉伸强度达20.3 MPa.     

On the Integration by Parts and Characterization of a Fractional Diffusion Process北大核心CSCD

本文研究分数扩散过程和其分部积分公式的关系.首先利用Bismut方法给出拉回公式,进而得到分数扩散过程的分部积分公式。反过来,证明了分数扩散过程可由其分部积分公式唯一刻画.