Mixed micellization and surface properties of non-ionic/cationic surfactants

We investigate the surface properties of aqueous binary mixtures of our cationic surfactant O-dodecyl-N,N′-diisopropylisourea hydrochloride (ISO-DIC C₁₂) with commercially available nonionic surfactant polyoxyethylene p-(1,1,3,3-tetramethylbutyl)phenyl ether (TritonX-100) at different temperatures (288 to 303?K). The micellization behavior of the binary systems is studied by determining the surface tension and other important physicochemical parameters, such as the critical micelle concentration (CMC), surface tension at the CMC(γ_cmc), Krafft Temperature (T_K), maximum excess concentration (Γ_max), minimum surface area per molecule (A_min), surface pressure at the CMC (П_cmc), and the adsorption efficiency (pC20) at the air/water interface. The study has additionally covered the calculation of thermodynamic parameters of micellization, including the standard Gibbs free energy, the standard enthalpy, the standard entropy, the free energy, and the Gibbs free energy of adsorption at air/water interface. The CMC values of the binary systems determined by experimental data are used to evaluate the micellar composition in the mixed micelle, the interaction parameter β and the activity coefficients f₁(ISO-DIC C₁₂) and f₂ (polyoxyethylene p-(1,1,3,3-tetramethylbutyl)phenyl ether) using the theoretical treatment proposed by Clint and Rubingh. Our results reveal that the proposed binary systems possess enhanced surface activity compared to those of the individual surfactants.     

Aqueous phase behavior of ionic liquid-related gemini surfactant revealed by differential scanning calorimetry and polarized optical microscopy

An aqueous phase behavior was investigated for ionic liquid-related cationic gemini surfactant, [C₁₂im-4-C₁₂im][Br₂], in which two dodecylimidazolium parts are linked by a spacer composed of four methylene units. Differential scanning calorimetry was used to detect phase boundaries among various phases, from which a temperature−composition (T−X) phase diagram was constructed. Lyotropic liquid-crystalline phases appearing in this mixture were characterized by means of polarized optical microscopy. It was revealed that (1) two types of liquid-crystalline phases, lamellar (L_a {{\hbox{L}}_\alpha } ) and hexagonal (H₁), are formed; (2) H₁ phase coexists with micellar solution (L₁) over a wide concentration range from a few wt.% to ca. 80 wt.% of the surfactant; and (3) the hydrated solid with the composition of [C₁₂im-4-C₁₂im][Br₂]·2H₂O exhibits incongruent melting point at which the hydrated solid decomposes into H₁ phase and unhydrated surfactant solid.     

Aggregation and thermodynamic properties of ionic liquid-type gemini imidazolium surfactants with different spacer length

The aggregation behavior and thermodynamic properties of micellization for the ionic liquid-type gemini imidazolium surfactants with different spacer length ([C₁₂–s–C₁₂im]Br₂, s = 2, 4, 6) have been investigated by means of surface tension, electrical conductivity, dynamic light scattering and fluorescence measurements. The values of cmc, γ _cmc, Γ _max, A _min, π _cmc, pc₂₀ and cmc/pc₂₀ suggest that the shorter the spacer, the higher the surface activity of [C₁₂–s–C₁₂im]Br₂ is. The cmc and γ _cmc values are decreased significantly in the presence of sodium halides, and the values decrease in the order NaCl < NaBr < NaI. The thermodynamic parameters of micellization (, , ) indicate that the micellization of [C₁₂–2–C₁₂im]Br₂ and [C₁₂–4–C₁₂im]Br₂ is entropy-driven, whereas aggregation of [C₁₂–6–C₁₂im]Br₂ is enthalpy-driven at lower temperature but entropy-driven at higher temperature. Finally, the fluorescence measurements show that the micropolarity of micelles increases but the aggregation numbers decrease with increasing the spacer length of [C₁₂–s–C₁₂im]Br₂.     

Surface and volume properties of dodecylethyldimethylammonium bromide and benzyldimethyldodecylammonium bromide: II. Volumetric properties of dodecylethyldimethylammonium bromide and benzyldimethyldodecylammonium bromide

Density measurements were carried out for aqueous solutions of two cationic surfactants: dodecylethyldimethylammonium bromide (C₁₂(EDMAB)) and benzyldimethyldodecylammonium bromide (BDDAB). On the basis of the obtained results of the measurements the CMC and partial molar volumes of the surfactants studied were also determined. The obtained CMC values were also analyzed with those accounted on the basis of the surface tension data from the previous paper [J. Harkot, B. Jańczuk, J. Colloid Interface Sci. (2008), submitted for publication]. The values of CMC determined from the surface tension and density measurements for C₁₂(EDMAB) are equal to 9.9×10⁻³ and 1.5×10⁻² M and for BDDAB to 5.25×10⁻³ and 5.3×10⁻³ M, respectively. These obtained values are very similar. However, in the literature it is difficult to find the CMC values for C₁₂(EDMAB) and BDDAB determined by these two methods used by us—especially from the density measurements for BDDAB and surface tension measurements for C₁₂(EDMAB). In the case of the apparent molar volumes of C₁₂(EDMAB) there is a good agreement between the values obtained by us and those found in the literature. The CMC values for C₁₂(EDMAB) and BDDAB were also determined on the basis of their surface tension and free energy of electrostatic interactions between the polar heads of these surfactants and compared with those obtained from the surface tension and density measurements. It was found that the theoretically obtained CMC values were close to those determined from the density and surface tension data for the C₁₂(EDMAB) and that the ratios of the CMC values of the surfactants to their concentration at which the water surface tension decreased by about 20 mN/m proved that the presence of the aryl group in the BDDAB head instead of the methyl group caused that its micellization process was more inhibited in relation to its adsorption at air–water interface than that of C₁₂(EDMAB).     

Interfacial Properties of Aqueous Nonionic Fluorocarbon Surfactant Solutions

The equilibrium, dynamic surface tensions, and surface dilatational elasticity of aqueous solutions of nonionic fluorocarbon surfactant are reported. The critical micellar concentration, CMC (0.023 mM) and equilibrium surface tension (24.6 m N . m^?1) at CMC were measured by Wilhelmy plate method for aqueous solution of C₈F₁₇SO₂N(C₃H₇)(C₂H₄O)_nH (n=20), abbreviated as EF122A. The surface tension decay is slower for C₈F₁₇SO₂N(C₃H₇)(C₂H₄O)_nH (n=10) system, abbreviated as EF122B compared to the EF122A system over short time region, which indicates the slow transport of the surfactant molecules to the surface. The relaxation time for surface tension decay is estimated by fitting a series of exponentials to the dynamic surface tension data and it decreases with temperature for EF122A. Slow exchange of monomers between bulk and interface is reflected in the high elasticity value of the air‐liquid interface for EF122B compared with EF122A within measured frequency window (0.125–1.25 Hz).     

Micellization behavior of the ionic liquid lauryl isoquinolinium bromide in aqueous solution

The micellization behavior of the ionic liquid lauryl isoquinolinium bromide ([C₁₂iQuin]Br) in aqueous solution has been assessed using surface tension, electrical conductivity, and ¹H nuclear magnetic resonance (NMR) measurements. The results reveal that the critical micelle concentration (CMC) and constant surfactant tension (γ _cac) are lower than that of butyl isoquinolinium bromide ([C₄iQuin]Br), octyl isoquinolinium bromide ([C₈iQuin]Br, and lauryl pyridinium bromide ([C₁₂Pyr]Br). ¹H NMR spectra show the evidence of paralleled π-stacking of adjacent isoquinoline rings. To elucidate the effect of the π–π interactions on the aggregation process, thermodynamic parameters such as the standard free energy, enthalpy, and entropy of aggregation have been discussed. These parameters are evaluated from the CMC with temperature by fitting these values to expressions derived from a micellization thermodynamic model. The enthalpy–entropy compensation phenomenon has been observed in the micellization process of [C₁₂iQuin]Br in water, and the presence of isoquinoline cations is responsible for the decrease in the ΔH _mic ^? , compared with [C₁₂Pyr]Br which has the same alkyl chain and counter-ion.     

烷基咪唑离子液体对脂肪酶催化酯水解反应活性的影响

考察了1-烷基-3-甲基咪唑类离子液体对柱状假丝酵母脂肪酶(CRL)催化橄榄油水解反应活性的影响,利用电导法确定了磷酸盐缓冲液中Br^-,Cl^-,[BF₄]^-系列咪唑离子液体的临界胶束浓度(CMC)和[PF₆]^-系列咪唑离子液体的溶解度.结果显示,离子液体的阴、阳离子对酶活性的影响规律与离子液体的Kosmotropicity性质无明显关联,但与离子液体在体系中的含量密切相关,在最适离子液体含量时,酶活性达到最高;阳离子[C_nMIM]⁺中的n越大,可促进酶活性的离子液体适宜含量越低;Br^-,[BF₄]^-系列离子液体的浓度超过CMC时则抑制酶活;阴离子对酶活性的最大促进作用顺序为Br^->Cl^->[BF₄]^->[PF₆]^-.离子液体对酶活性的影响随体系pH和温度的不同而改变,在最适离子液体浓度时的最适pH均为7.000.在pH 7.000,30 ^oC以及[C₈MIM]Br离子液体浓度为47.6 mmol/L的最佳条件下,最高相对酶活力和比活力分别达到1734%和54.4 U/mg protein.     

Impact of imidazolium-based ionic liquid surfactant additions on dilational rheology properties of different protein adsorption layer

The interfacial behavior of β-casein and BSA solutions have been investigated in the presence of imidazolium-based ionic liquid surfactant ([C₁₄mim]Br) at the decane/water interface with the oscillating the drop and interfacial tension relaxation measurements. Both the electrostatic and the hydrophobic interaction between protein and [C₁₄mim]Br played crucial roles as [C₁₄mim]Br concentration increases. Furthermore, it was found that the dilational rheology parameters provided information of the adsorbed layers structure, and the dynamics properties of the adsorbed layers depend on the bulk [C₁₄mim]Br concentration. Moreover, with the concentration of [C₁₄mim]Br increasing, β-casein in the interfacial layer was subject to conformational changes where it gave space to [C₁₄mim]Br molecules in the form of co-adsorb; for BSA/[C₁₄mim]Br solutions, the globule protein BSA deformed and then co-adsorb with [C₁₄mim]Br molecules at the decane/water interface. These results will contribute to elucidation of the influence of the surfactant on the different structure proteins and the wide applications of protein/surfactant systems in practice.     

Adsorption and aggregation properties of novel star-shaped gluconamide-type cationic surfactants in aqueous solution

The adsorption and aggregation behavior of novel star-shaped gluconamide-type cationic surfactants N-dodecyl-N,N-bis[(3-D-gluconylamido)propyl]-N-alkylammonium bromide (C_nDBGB, where n represents hydrocarbon chain lengths of 10, 12, and 14) has been studied on the basis of static/dynamic surface tension, conductivity, dynamic light scattering (DLS), and transmission electron microscopy (TEM) data. The static surface tension of the C_nDBGB aqueous solution measured at the critical micelle concentration (CMC) is observed to be significantly lower than that of the corresponding monomeric surfactants. The dynamic surface tension results indicate that adsorption process of above CMC is a mixed diffusion–kinetic adsorption mechanism. From the results of temperature dependent conductivity measurements, we could obtain the degree of counterion binding (β) and the thermodynamic parameters such as standard free energy (ΔG _mic ⁰ ), enthalpy (ΔH _mic ⁰ ), and entropy (ΔS _mic ⁰ ) of aggregation. With a combination of the DLS and TEM data, a size transformation of the micelles is suggested to occur with an increase in the concentration.     

Micelle formation by N-alkyl-N-methylpyrrolidinium bromide in ethylammonium nitrate

The aggregation behavior of long-chain pyrrolidinium ionic liquids, N-alkyl-N-methylpyrrolidinium bromide (C_nMPB, n = 12, 14, and 16) was investigated by surface tension measurements in a protic room temperature ionic liquid, ethylammonium nitrate (EAN), at various temperatures. A series of parameters, including critical micelle concentration (CMC), surface tension at the CMC (γ_CMC), effectiveness of surface tension reduction (Π_CMC), maximum surface excess concentration (Γ_max), and the area occupied per surfactant molecule at the air/solution interface (A_min) were estimated. From these parameters, we demonstrated that the surface activity of C_nMPB is much lower in EAN than that in water. Comparing C_nMPB with alkylimidazolium bromides and alkylpyridinium bromides, the effect of the cationic group on micellization in EAN was also investigated. The thermodynamic analysis of micellization revealed that the micelle formation process for C_nMPB (n = 12, 14, and 16) is entropy-driven at low temperature and enthalpy-driven at high temperature. The micelle aggregation number estimated from the ¹H NMR data is about 21 for C₁₂MPB in EAN, which is much less than that in water. The results of the surface tension measurements and ¹H NMR spectra indicate that the [CH₃CH₂NH₃]⁺ cations of EAN exist around the head groups of C_nMPB when micelles are formed and the NO₃⁻ ions are adsorbed at the micelle surface.     

Effect of electrolytes on surface tension and surface adsorption of 1-hexyl-3-methylimidazolium chloride ionic liquid in aqueous solution

Surface and bulk properties of 1-hexyl-3-methylimidazolium chloride [C₆mim][Cl] as an ionic liquid (IL) have been investigated by surface tension and electrical conductivity techniques at various temperatures. Results reveal that the ionic liquid behaves as surfactant-like and aggregates in aqueous solution. Critical aggregation concentration (cac) values obtained by conductivity and surface tension measurements are in good agreement with values found in the literature. A series of important and useful adsorption parameters including cac, surface excess concentration (Γ), and minimum surface area per molecule (A_min) at the air + water interface were estimated from surface tension in the presence and absence of different electrolytes. Obtained data show that the surface tension as well as the cac of [C₆mim][Cl] is reduced by electrolytes. Also, values of surface excess concentration (Γ) show that the IL ions in the presence of electrolyte have much larger affinity to adsorption at the surface and this affinity increased in aqueous electrolyte solution in the order of I^? > Br^? > Cl^? for counter ion of salts that was explained in terms of a larger repulsion of chloride anions from interface to the bromide and iodide anion as well as difference in their excess polarizability.     

Determination of the Critical Micelle Concentration of Surfactant in Aqueous Solution by Twisted Intramolecular Charge Transfer Probe DMABN

With p-N,N-dimethylaminobenzonitrile (DMABN) as a probe, the variations of the intensity of its second fluorescence emission (I_a) and the corresponding characteristic wavelength (λ_a) with the surfactant concentration (c), here the examined surfactants (C₁₂TABr, SDS, C₁₂E₂₃, and C₁₂-3-C₁₂·2Br), were measured by Hitachi F4500 fluorescence spectrophotometer. The results showed that both the break points on the I_a–c curve and the minimum of the derivative variation corresponding to the λ_a–c curve agreed very well with the critical micelle concentration (cmc) of the surfactant in aqueous solution as measured by surface tension technique. Due to strong aggregation of C₁₂-3-C₁₂·2Br in aqueous solution, the information about loose micellar structure could be obtained by its λ_a–c curve.     

Effect of Organic Solvents on the Electrodeposition of Copper from Acidified CuSO4

Using Guerbet tetradecyl alcohol C₁₄GA (synthesized by Guerbet reaction using 1-heptanol as raw material) as intermediate, sodium Guerbet tetradecyl polyoxyethylene ether sulfates [C₁₄GA(EO)_nS, n = 1, 2, 4] were obtained through following steps: synthesizing Guerbet tetradecyl polyoxyethylene ether alcohols [C₁₄GA(EO)_nH, n = 1, 2, 4] by Williamson reaction, then esterifying with chlorosulfonic acid so as to form Guerbet tetradecyl polyoxyethylene ether alcohol sulfates [C₁₄GA(EO)_nSO₃H, n = 1, 2, 4], and finally neutralizing with sodium hydroxide; while sodium Guerbet tetradecyl sulfate(C₁₄GAS) was synthesized only through esterifying and neutralizing reactions. The structures of these anionic surfactants were determined by infrared, nuclear magnetic resonance, and element analysis. The surface activity of these surfactants was studied by means of surface tension. The results have shown that these surfactants possess higher surface activity than the common surfactant C₁₂H₂₅OSO₃Na. Branched-tail structure coming from Guerbet alcohol makes the anionic surfactant (C₁₄GAS) have higher critical micelle concentration (CMC) and better effectiveness in lowering the interface tension between air and water than their linear counterpart (C₁₄H₂₉OSO₃Na). Introducing oxyethyene group into the place between head group and tail group of the surfactant molecule with branched tail can lower the CMC, γ_cmc, and Krafft point. And the effectiveness for reducing the CMC, γ_cmc, Γ_max, and Krafft point of surfactant increased with the increase of oxyethylene group number (n = 1, 2, 4). The relationship between the molecular structure and surface activity of surfactant is discussed.     

反离子对离子液体氯化1-(2-羟乙基)-3-十二烷基咪唑在水溶液中自组装的影响

用表面张力法和荧光探针技术分别测定了阳离子型离子液体表面活性剂氯化1-(2-羟乙基)-3-十二烷基咪唑([C2OHC12im]Cl)在无机盐(NaX,X=Cl-,Br-,I-和Na2SO4)水溶液中的自组装参数。 结果表明,反离子通过结合[C2OHC12im]+并中和其表面电荷,使[C2OHC12im]+的临界胶束浓度(CMC)和胶束平均聚集数(Nm)等自组装参数明显改变;改变幅度按照Cl-＜Br-＜I-＜SO2-4次序递增;但是反离子(Cl-、Br-和SO2-4)种类对临界胶束平均聚集数(Nm,c)和胶束微极性([I1/I3]m)的影响不甚明显;随着Br-浓度增加,lg CMC线性减小,而Nm则以幂函数形式递增。     

Unveiling the binding interaction of zinc (II) complexes of homologous Schiff-base ligands on the surface of BSA protein: A combined experimental and theoretical approach

Four new zinc (II) complexes [Zn (HL¹H)Br₂] (1), [Zn (HL¹H)Cl₂] (2), [Zn₂(HL²)Br₃] (3), and [Zn (HL²)Cl] (4) have been synthesized by adopting template synthetic strategy and utilizing two homologous Schiff base ligands (H₂L¹ = 4-bromo-2-{[2-(2-hydroxyethylamino)-ethylimino]-methyl}-6-methoxyphenol, H₂L² = 4-bromo-2-{[3-(2-hydroxyethylamino)propylimino]methyl}-6-methoxyphenol), differing in one -CH₂- unit in the ligating backbone, by adopting template synthetic strategy. All the complexes have been characterized by single crystal X-ray diffraction analysis as well as by other routine physicochemical techniques. Ligand mediated structural variations have been observed and rationalized by density functional theoretical (DFT) calculations. Interaction of the complexes 1–4 with Bovine Serum Albumin protein (BSA) has been studied by different spectroscopic techniques. A complete thermodynamic profile (ΔH^o, ΔS^o and ΔG^o) was evaluated initially from the change in absorption and fluorescence spectra upon addition of BSA to the complexes. Appreciable binding constant values in the range ~ 0.94–4.51 × 10⁴ M⁻¹ indicate efficient binding tendency of the complexes to BSA with the sequence 1 ≅ 2 > 3 ≅ 4. Circular dichroism (CD), isothermal calorimetric titration experiments, molecular docking and molecular dynamics have been performed to gain deep insight into the binding regions of complex 1 to BSA. Experimental evidences suggest an interaction of zinc complexes at the surface of BSA protein and this particular binding has been exploited to determine unknown concentration of BSA protein. For this purpose complex 1 was explored as a BSA protein quantification tool.     

Synthesis and Performance of Novel Sulfonate Gemini Surfactant with Trialkyl Chains

A new type of sulfonate gemini surfactant with three lipophilic alkyl chains (3C₁₀-DS) was synthesized, and the structure of the product was confirmed by using the infrared spectrum and mass spectrum. Its critical micelle concentration (CMC) is 0.41 mmol/L, one order of magnitude lower than those of convectional (single-chain) surfactants, and the minimum surface tension is 27.6 mN/m. The interfacial tension (IFT) between the compound system of 3C₁₀-DS and petroleum sulfonate (PS) and the simulated oil reaches ultra-low levels (10^?3 mN/m), and there exists significant synergistic effect between 3C₁₀-DS and PS. The compound flooding system consisting of polymer and the mixture of 3C₁₀-DS and PS can effectively improve oil recovery for high-medium permeability cores and have a good application prospect in enhancing oil recovery.     

Effect of Organic Counterions on the Properties of N-Lauryl Diisopropanolamine Surfactants

The influence of counterions on the surface properties of N-lauryl diisopropanolamine surfactants is delineated using conductometry and surface tension measurements. Twelve types of organic counterions have been studied: C₁–C₁₂ monocarboxylic acids anions. The surface properties of the synthesized surfactants, including surface tension, critical micelle concentration (CMC), effectiveness (π_CMC), efficiency (pC₂₀), maximum surface excess (Γ_max), minimum surface area (A_min), Gibbs energy of micellization (ΔG_mic), and adsorption (ΔG_ad) processes in the aqueous. The biodegradability of the prepared surfactants was tested in river water using the die-away method. Petroleum-collecting and petroleum-dispersing capacities of the synthesized compounds on the surface of water of varying mineralization degree have been studied.     

Synthesis and properties of quaternary ammonium Gemini surfactants with hydroxyl groups

The article describes synthesis of four hydroxyethyl alkylene–double alkyl bromide through substitution of nucleophilic d iethanolamine, 1-bromododecane, and 1,4-dibromobutane. The structure of the new hydroxyl cationic surfactant (HDCS) was characterized by ¹H NMR and FTIR spectra. The aqueous solution of HDCS showed critical micelle concentration, i.e., 5.6 × 10^?2 mM, and could reduce oil/water interfacial tension to 3.28 × 10^?3 mN m^?1. The surface tension measurements provided a series of parameters, including critical micelle concentration (CMC), surface tension at the CMC (γ_CMC), adsorption efficiency (pC₂₀), and effectiveness of surface tension reduction (Π_CMC). In addition, maximum surface excess concentration (Г_max) and minimum surface area/molecule (A_min) at the air/water interface were obtained by the Gibbs adsorption isotherm. The influence of inorganic salts (sodium chloride, calcium chloride) and organic salts (sodium benzoate) on the surface tension of HDCS in aqueous solution was investigated. For wettability alteration measurement, contact angle measurement as a quantitative method was utilized. Meanwhile, foam ability, foam stability, and emulsifying property of the synthesized surfactant were also examined at different concentration. HDCS also had excellent viscosity property.