Analytical applications of photon correlation spectroscopy for size distribution measurements of natural colloidal suspensions: capabilities and limitations

Particles are ubiquitous in all natural systems and play an important role in the control and fate of nutrients and pollutants. Currently, only limited information is available concerning particle number and size distributions, owing to the problems involved in their experimental determination. In the present paper, limitations and optimal conditions for particle size determinations of environmental samples using photon correlation spectroscopy are studied. The detection limit, the effects of polydispersity of the sample and the refractive index value are discussed based on results obtained with synthetic colloids. The photon correlation spectroscopic determination of particle size distributions in real aquatic systems is also presented in the second part of the paper.     

Nitroxide‐mediated radical polymerization in miniemulsion: Bimolecular termination in monomer‐free model systems

Bimolecular termination in nitroxide‐mediated radical polymerization in miniemulsion has been investigated through the heating of a polystyrene–2,2,6,6‐tetramethylpiperidinyl‐1‐oxy macroinitiator and its 4‐hydroxy‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy analogue in an aqueous toluene dispersion with sodium dodecyl benzenesulfonate as a surfactant at 125 °C. The level of bimolecular termination by combination, evaluated from the high‐molecular‐weight shoulder, was higher in miniemulsion than in solution and increased with decreasing particle size. Quantitative analysis revealed that these results cannot be rationalized solely by nitroxide partitioning to the aqueous phase. The results are explained by an interface effect, by which nitroxide is adsorbed or located at the aqueous–organic interface. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4995–5004, 2007     

Solvothermal Synthesis of Molybdenum Disulfide Hollow Spheres Modified by Cyanex 301 in Water–Ethanol Medium

Hollow spherical molybdenum disulfide has been successfully synthesized via a solvothermal method using Cyanex 301 as sulfur source and modification agent. The hollow spheres are characterized by transmission electron microscopy, scanning electron microscopy, X-ray diffraction and Energy-Dispersive X-ray analysis. The influences of reaction conditions are also discussed while a mechanism is proposed to explain the formation of the peculiar morphology.     

A strategy for synthesis of polymer-protective bimetallic colloids

A strategy for the synthesis of polymer-protective bimetallic sols is proposed which has the advantage of the strong protective effect of the polymer agent on one of the composites to stabilize the bimetallic colloidal particles. This strategy is certified to be useful to the predication of the formation of stable bimetallic colloids protected by polymer and to the control of the particle size to a certain extent. A series of new PVP-protective bimetallic colloidal dispersions containing noble metal element (Pt, Rh, Pd), light transition metal element (Co, Fe), and boron are obtained from the corresponding salts by the methods of reduction by stage and coreduction, using the NaBH4 as reductant. The TEM, XRD and EPMA measurements indicate the formation of bimetallic colloids. An interesting kind of coil aggregation is observed in the systems of PVP-Pt-Co and PVP-Rh-Co prepared by the method of reduction by stage.     

Aggregation of iron colloids in estuaries: a heterogeneous kinetics study using continuous mixing of river and sea waters

The kinetics of iron colloid aggregation in estuaries have been simulated with a model estuary in which seawater is continuously pumped into a reservoir initially containing river water. Profiles of colloidal Fe concentration versus salinity produced in this apparatus closely resembled field data for actual estuaries. Synthetic Fe colloids prepared by peptising Fe(OH)₃ with humic acid and phosphate showed very similar kinetic behaviour. Aggregation rate was found to be almost independent of velocity shear rate, implying that most aggregations are induced by brownian interparticle collisions. A heterogeneous kinetic model is proposed to explain the kinetic behaviour of Fe colloids during seawater-induced aggregation. This model describes kinetic behaviour in terms of a log-normal distribution of rate constants characterised by a mean value k and a standard deviation γ. Experiments showed that k is linearly related to the rate constant for salinity increase during mixing. This coupling of salinity changes and aggregation rate leads to Fe-salinity profiles that are nearly independent of the rate of salinity change, but which are dependent on γ.     

Charge and Size Dependence of Liposome Diffusion in Semidilute Biopolymer Solutions

The diffusion of liposomes and PL/DNA complexes in mucin and collagen solutions, considered to model ‘in vivo’ colloidal gene delivery vector transport, is studied with FCS. The diffusion of defined liposomes is investigated as a function of particle size, surface charge, and the deviation from the Stokes‐Einstein behavior. In all cases the self‐diffusion coefficient decreases exponentially with polymer concentration. The same surface charge dependence of diffusion is observed in mucin for PL/DNA complexes with either positive or negative excess charge. Incubation of positively‐charged PL/DNA complexes in a natural lung surfactant lipid increases the diffusion coefficients to almost the same as for the negatively‐charged PL/DNA complexes.

     

Synthesis of saccharidic polymer colloids via free radical mini‐emulsion polymerization

Polymer colloids based on 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐α‐D ‐glucofuranose (3‐MDG) and butyl acrylate (BA) were prepared via free radical mini‐emulsion polymerization. The kinetic and colloidal features of the copolymerization were investigated. The final particle size (D) of the sugar latexes is inversely proportional to the concentration of the anionic emulsifier (sodium dodecyl sulphate, SDS) and the non‐ionic one (alkyl polyglucoside, APG). It was also found that D is independent of the concentration of either the water‐soluble initiator (potassium persulfate, KPS), or the oil‐soluble initiator (2,2′‐azobisisobutyronitrile, AIBN). The rate of mini‐emulsion polymerization is lower in comparison with the conventional emulsion polymerization under the same conditions. The polymerization rate (R_p) and the total number of particles (N_p) are proportional to the 0.72th and 0.93th power of the SDS, and to the 1.40th and 2.22th of the APG concentration. Following reaction orders, 0.79/0.06 were obtained for R_p/N_p versus the concentration of KPS, and 0.22/?0.01 for AIBN, respectively. Copyright © 2004 John Wiley & Sons, Ltd.     

Immobilization of Polymer-Stabilized Noble Metal Colloids and Their Catalytic Properties for Hydrogenation of Olefins

Polymer-stabilized noble metal colloids were efficiently immobilized on silica by the addition of organic acids under mild conditions. The function of organic acids in the immobilization was studied by infrared spectroscopy. Transmission electron micrographs indicate that the immobilized colloids have a controlled particle size and size distribution. They serve as catalysts in the hydrogenation of cyclohexene and cyclopentadiene, the results of which show that this new type of immobilized colloid has high selectivity and good stability.     

A new aptameric biosensor for cocaine based on surface-enhanced Raman scattering spectroscopy

The present study reports the proof of principle of a reagentless aptameric sensor based on surface-enhanced Raman scattering (SERS) spectroscopy with "signal-on" architecture using a model target of cocaine. This new aptameric sensor is based on the conformational change of the surface-tethered aptamer on a binding target that draws a certain Raman reporter in close proximity to the SERS substrate, thereby increasing the Raman scattering signal due to the local enhancement effect of SERS. To improve the response performance, the sensor is fabricated from a cocaine-templated mixed self-assembly of a 3'-terminal tetramethylrhodamine (TMR)-labeled DNA aptamer on a silver colloid film by means of an alkanethiol moiety at the 5' end. This immobilization strategy optimizes the orientation of the aptamer on the surface and facilitates the folding on the binding target. Under optimized assay conditions, one can determine cocaine at a concentration of 1 muM, which compares favorably with analogous aptameric sensors based on electrochemical and fluorescence techniques. The sensor can be readily regenerated by being washed with a buffer. These results suggest that the SERS-based transducer might create a new dimension for future development of aptameric sensors for sensitive determination in biochemical and biomedical studies.