Two-dimensional model of elastically coupled molecular motors

A flashing ratchet model of a two-headed molecular motor in a two-dimensional potential is proposed to simulate the hand-over-hand motion of kinesins.Extensive Langevin simulations of the model are performed.We discuss the dependences of motion and efficiency on the model parameters,including the external force and the temperature.A good qualitative agreement with the expected behavior is observed.     

具有三核Cd(Ⅱ)簇单元和螺旋链的脯氨酸类单一手性金属-有机框架材料的合成、 结构和性质

在溶剂热反应条件下, 使用含氮辅助配体1,4-二(4-吡啶基)苯(1,4-DPB)和半刚性脯氨酸衍生物配体(R)-5-(2-羧基吡咯烷-1-羰基)间苯二甲酸[(R)-H₃PIA]或(S)-5-(2-羧基吡咯烷-1-羰基)间苯二甲酸[(S)-H₃PIA]与Cd²⁺构筑了单一手性金属-有机框架材料[Cd_1.5((R)-PIA)(1,4-DPB)_1.5]·0.75H₂O·xGuest(1-D)和[Cd_1.5((S)-PIA)(1,4-DPB)_1.5]·0.75 H₂O·xGuest(1-L). 配合物1-D和1-L呈具有开放孔道的三维柱层式框架结构, 含有三核镉簇单元 Cd₃(CO₂)₆与两种螺旋链构建的波浪形Cd-PIA层. 分别对上述化合物进行了粉末X射线衍射、 热重分析、 圆二色谱和荧光光谱等测试. 测试结果显示配合物1-D和1-L都是以纯晶体的形式存在, 2种配合物的热失重曲线接近, 圆二色谱有明显的正负吸收峰, 符合其对映体的结构特征.     

整体式固相微萃取搅拌棒-分光光度法测定孔雀石绿

以开发新型吸附萃取搅拌棒为目的,利用环氧树脂、二乙基三胺和聚乙二醇（PEG 1540）通过原位逐步聚合反应制备了内封磁芯的搅拌棒.以孔雀石绿（MG）为目标分析物,详细优化了该搅拌棒吸附萃取的实验条件.在搅拌棒转速为450r？min-1和pH值为7的条件下吸附30min,然后用体积比为7：3的乙腈：乙酸铵缓冲溶液（pH 4~5）作为解吸液解吸20min.以紫外-可见分光光度计为检测手段,测定解吸液中MG的含量.该方法在0.01~5μg？mL-1的浓度范围呈现较好的线性关系,精密度和回收率较为满意.     

聚苯胺衍生物电致变色薄膜的制备与物性研究

采用循环伏安电化学沉积方式分别制备了聚邻甲氧基苯胺(1)和聚邻甲氧基苯胺/邻硝基苯胺(2)电致变色薄膜, 并通过UV-Vis、分光光度仪、场发射扫描电子显微镜(SEM)对其进行性能表征. 结果显示: 变色膜1在不同电压下能实现湖绿色(U＝－0.5 V)和淡紫色(U＝0.9 V)变化, 响应时间约15 s, 最大透光率变化(DT_max)约10% (500 nm)|变色膜2在不同电压下能实现橄榄绿色(U＝－0.9 V)和深酞蓝色(U＝1.4 V)变化, 响应时间约2 s, 最大透光率变化(DT_max)约为20% (497 nm)|SEM测试得到薄膜2的厚度约550 nm, 且不同颜色状态下其表面形貌及导电性能有较大的差别. 由以上结果可以看出: 电致变色薄膜2比1具有更快的响应速度和较好的颜色对比度, 因此薄膜2是更好的电致变色材料.     

基于原理实例检索的可变功能产品功能升级再设计

针对可变功能产品随市场变化导致其功能和性能存在不足之处的情况, 提出了用于该类产品功能升级再设计的“原理实例检索法”. 首先, 归纳总结出功能升级的4种基本类型, 依据总结出的功能升级类型, 从功能需求的角度出发, 提出了一个功能升级辅助再设计软件原型系统, 用以进行原理实例的检索. 若检索结果无相关原理或实例支持功能升级, 则对升级功能进行TRIZ(发明问题解决理论)工程参数转化, 通过构建冲突矩阵获得创新原理解. 以电动工具为例, 建立的功能升级辅助再设计系统搜集了用于实现电动工具常见功能的基本原理和实例, 并利用Access数据库和Visual Basic 6.0对设计信息进行存储和原型系统构建. 其次, 对升级功能结构和原共享结构间的匹配情况进行分析, 得出结构匹配可能出现的5类基本情况. 最后, 以电钻“打磨固体”升级功能设计为实例, 利用上述功能升级再设计方法, 设计出了磨砺性能良好的“去锈打磨盘”, 验证了所提出的可变功能产品功能升级再设计方法的可行性.     

可变功能产品功能使用模型及基于模型的关联耦合性分析

开展可变功能产品的构件关联性与功能耦合性的研究对设计该类产品有着重要的实用价值. 针对现有研究未能考虑功能使用情况的不足, 提出了可变功能产品功能使用模型的概念, 通过对各可变功能附加使用情况信息, 构建了可用以描述同一产品不同使用情况的功能使用模型; 随后将功能使用模型与功能-构件关联矩阵相结合, 提出了一种考虑功能使用情况的构件关联性与功能耦合性的量化方法. 最后, 通过一可变功能料理机的案例, 阐述了该方法的可行性及实施过程, 并基于构件关联性和功能耦合性的求解结果, 得出了对设计面向使用的产品或对现有产品进行改进设计具有指导意义的结论.     

6H-SiC衬底上AlGaN基垂直结构紫外LED的制备

利用金属有机物化学气相沉积方法,在n型6H-SiC衬底上制备了15对Si掺杂Al_(0.19)Ga_(0.81)N/Al_(0.37)Ga_(0.63)N DBR,并采用低温AlN缓冲层有效抑制了DBR结构中裂纹的产生,得到了表面均方根粗糙度仅为0.4 nm且导电性能良好的n型DBR,其在369 nm处峰值反射率为68%,阻带宽度为10 nm。在获得导电DBR的基础上,进一步在n型6H-SiC衬底上构建了有、无DBR的垂直结构紫外LED。对比两者电致发光光谱,发现DBR结构的引入有效增强了LED紫外发光强度。     

Review on second-harmonic generation of ultrasonic guided waves in solid media (I):Theoretical analyses

Considering the high sensitivity of the nonlinear ultrasonic measurement technique and great advantages of the guided wave testing method, the use of nonlinear ultrasonic guided waves provides a promising means for evaluating and characterizing the hidden and/or inaccessible damage/degradation in solid media. Increasing attention on the development of the testing method based on nonlinear ultrasonic guided waves is largely attributed to the theoretical advances of nonlinear guided waves propagation in solid media. One of the typical acoustic nonlinear responses is the generation of second harmonics that can be used to effectively evaluate damage/degradation in materials/structures. In this paper, the theoretical progress of second-harmonic generation (SHG) of ultrasonic guided wave propagation in solid media is reviewed. The advances and developments of theoretical investigations on the effect of SHG of ultrasonic guided wave propagation in different structures are addressed. Some obscure understandings and the ideas in dispute are also discussed.     

Analysis of Second-Harmonic Generation of Low-Frequency Dilatational Lamb Waves in a Two-Layered Composite Plate

We analyze the effect of second-harmonic generation(SHG) of primary Lamb wave propagation in a two-layered composite plate, and then investigate the influence of interfacial properties on the said effect at low frequency. It is found that changes in the interfacial properties essentially affect the dispersion relation and then the maximum cumulative distance of the double-frequency Lamb wave generated. This will remarkably influence the efficiency of SHG. To overcome the complications arising from the inherent dispersion and multimode natures in analyzing the SHG effect of Lamb waves, the present work focuses on the analysis of the SHG effect of low-frequency dilatational Lamb wave propagation. Both the numerical analysis and finite element simulation indicate that the SHG effect of low-frequency dilatational Lamb wave propagation is found to be much more sensitive to changes in the interfacial properties than primary Lamb waves. The potential of using the SHG effect of low-frequency dilatational Lamb waves to characterize a minor change in the interfacial properties is analyzed.