量子点标记荧光免疫分析测定雌三醇

采用包被雌三醇完全抗原竞争免疫分析模式,以量子点标记羊抗兔抗体为荧光探针,建立了一种测定雌三醇的量子点标记的荧光免疫分析新方法.方法测定雌三醇的线性范围为0.01～10 000μg/L;检出限为0.007 5μg/L.此法用于尿液样品的分析,并利用高效液相色谱法进行对照,测定结果一致。     

Sr3SiO5∶Eu^2＋和Sr3SiO5∶Eu^2＋,Dy^3＋荧光粉的黄色长余辉性质

用高温固相法制备了Sr3SiO5∶Eu2 和Sr3SiO5∶Eu2 ,Dy3 荧光粉。在紫外光辐照后,Sr3SiO5∶Eu2 和Sr3SiO5∶Eu2 ,Dy3 荧光粉具有明亮的黄色长余辉,源于Eu2 的4f65d-4f7的跃迁。紫外光激发停止后,Sr3SiO5∶Eu2 的余辉时间是4 h以上。余辉衰减曲线和热释光曲线说明了引入Dy3 离子可以产生大量的深陷阱和浅陷阱。产生的深陷阱使余辉时间延长到6 h以上。由热释发光曲线,根据热释光的通用级公式拟合了陷阱深度。Sr3SiO5∶Eu2 和Sr3SiO5∶Eu2 ,Dy3 荧光粉是有应用前景的黄色长余辉材料。     

烟草中多酚类物质的超高效液相色谱指纹图谱及聚类分析

利用超声萃取-超高效液相色谱法对30个烟草样品（4个品种）的多酚类物质进行了快速分离与检测。实验以7个主要共有峰为评价指标,采用“计算机辅助中药指纹图谱相似度计算软件”计算处理,建立了不同种类烟草中多酚类物质的UPLC指纹图谱,并对烟草样品进行了聚类分析。结果表明：这种基于烟草多酚指纹图谱的分析策略是一种可同时实现整体性、模糊性分析且简便易行的方法模式,为烟草识别及烟草制品的质量控制提供了部分科学依据。同时该方法具有操作简单快速,精密度、稳定性和重现性良好等优点。     

电感耦合等离子体-原子发射光谱法测定塑料中的铅的不确定度评价

对电感耦合等离子体-原子发射光谱法测定塑料中的铅含量的不确定度进行了评定.建立了该方法的定量数学模型并推导出不确定度计算公式,找出了该检测过程中的不确定度来源,并且计算了公式中各个变量的不确定度,最后计算出了检测结果的合成标准不确定度和扩展不确定度.     

Gd3+掺杂TiO2纳米复合材料的可见光响应性能

采用溶胶-凝胶技术,在钛酸四丁酯(TBOT)的水解过程中,加入硝酸钆(Gd(NO₃)₃),得到具有可见光响应活性的Gd³⁺/TiO₂复合材料。应用TEM、XRD、TG-DTA和UV-Vis等手段对纳米TiO₂复合材料进行了表征。当Gd³⁺的掺杂量为0.5%时,Gd³⁺/TiO₂复合材料在550 nm附近产生宽强吸收带。Gd³⁺进入TiO₂晶格中,形成了新的掺杂能级(E_g=1.27 eV)。适量Gd³⁺掺杂的纳米TiO₂复合材料的光催化性能优于纯TiO₂粉体材料。     

Stacking-faults-free zinc blende GaAs/AlGaAs axial heterostructure nanowires during vapor-liquid-solid growth

Pure zinc blende structure GaAs/AlGaAs axial heterostructure nanowires (NWs) are grown by metal organic chemical vapor deposition on GaAs(111) B substrates using Au-catalyzed vapor-liquid-solid mechanism.Al adatom enhances the influence of diameters on NWs growth rate.NWs are grown mainly through the contributions from the direct impingement of the precursors onto the alloy droplets and not so much from adatom diffusion.The results indicate that the droplet acts as a catalyst rather than an adatom collector.     

Guided modes in asymmetric metal-cladding left-handed material waveguides

We investigate guided modes in the asymmetric waveguide structure with a left-handed material (LHM) layer surrounded by air and metal. A graphical method is proposed to determine the guided modes. New properties of the oscillating and surface guided modes, such as absence of the fundamental mode, coexistence of the oscillating and surface guided modes, fast attenuation of the surface guided modes, and mode degeneracy, are analyzed in detail. We also investigate dispersive characteristics of the metal-LHM- air optical waveguide. The propagation constant increases with decreasing slab thickness for the first-order oscillating mode, which is different from that in traditional metal-cladding waveguides.     

Photon tunneling and transmittance resonance through a multi-layer structure with a left-handed materialvspace2pt

This paper investigates the photon tunneling and transmittance resonance through a multi-layer structure including a left-handed material(LHM). An analytical expression for the transmittance in a five-layer structure is given by the analytical transfer matrix method. The transmittance is studied as a function of the refractive index and the width of the LHM layer. The perfect photon tunneling results from the multi-layer structure, especially from the relation between the magnitude of the refractive index and the width of the LHM layer and those of the adjoining layers. Photons may tunnel through a much greater distance in this structure. Transmittance resonance happens, the peaks and valleys appear periodically at the resonance thickness. For an LHM with inherent losses, the perfect transmittance is suppressed.     

Y3Al5O12:Ce3+,Cr3+和Y3Al5O12:Ce3+,pr3+,Cr3+荧光粉体系中的能量传递

通过在YAG:Ce3+和YAG:Ce3+,pr3+荧光粉体系中分别掺入Cr3+离子来提高蓝光管芯白光LED的显色指数.Cr3+离子的加入,增加了红光发射,这归因于Cr3+的2E-4 A2跃迁的零声子线和声子边带发光.Ce3+→Cr3+的能量传递是增强红光发射的重要方式,在YAG:Ce3+,Cr3+体系中,由发射光谱得到...     

荧光粉(Ca2.94-xLuxCe0.06)(ScMg)Si3O12的晶体结构和荧光性质

利用高温固相反应制备了一种由Lu改进的黄色荧光粉(Ca2.94-x LuxCe0.06)(ScMg)Si3O12(缩写为CKSMS:Ce3+),其中,0≤x≤0.94.同时研究了Lu含量对荧光粉的晶相、发光性质以及温度特性的影响.结果表明,Lu的引入导致荧光增强,其原因是由于Ce3+吸收增强而不是荧光粉内量子效率增加....