异丙醇羧酸铝催化合成呋喃酚反应研究

选择了异丙醇羧酸铝催化2-(2-甲基烯丙氧基)苯酚合成呋喃酚；探讨异丙醇羧酸铝用量对合成呋喃酚反应的影响.实验结果表明,异丙醇羧酸铝可高效催化2-(2-甲基烯丙氧基)苯酚合成呋喃酚.当催化剂为异丙醇二乙酸铝,用量为2-(2-甲基烯丙氧基)苯酚的2.50％(物质的量比),呋喃酚的收率达到80.8％,高于目前工业上以异丙醇铝为催化剂的78.3％,具有应用价值.     

冷场扫描电镜结合X-射线光电子能谱解析表面活性剂对含聚油泥稳定结构的影响

为解决胜利油田孤岛聚合物产生的高稳定性含聚油泥难以处理的问题,采用冷场扫描电镜(SEM)结合X-射线光电子能谱(XPS),对含聚油泥体系的结构及不同类型表面活性剂对油泥的作用进行分析.结果表明,聚丙烯酰胺(HPAM)和聚合氯化铝(PAC)作用产生的Al-O键和N+-Cl键会形成空间网状沉淀物质,而此种空间网状沉淀物质正...     

Ti/Pr0.7Ca0.3MnO3/La0.67Sr0.33MnO3/Pt异质结电致电阻效应的改善

采用脉冲激光沉积技术制备了Ti/Pr_0.7Ca_0.3MnO₃/Pt和Ti/Pr_0.7Ca_0.3MnO₃/La_0.67Sr_0.33MnO₃/Pt异质结并研究了La_0.67Sr_0.33MnO₃功能插层对异质结电致电阻特性的影响. 实验结果表明La_0.67Sr_0.33MnO₃功能层的引入有效提高了器件的电阻转变特性,尤其是电阻转变率和疲劳性得到了极大的改善. 对La_0.67Sr_0.33MnO₃插层改善电致电阻转变特性的机理进行了定性的分析. 关键词： 电致电阻效应 电阻转变比率 疲劳特性     

Beam test of a one-dimensional position sensitive chamber on synchrotron radiation

A one-dimensional single-wire chamber was developed to provide high position resolution for powder diffraction experiments with synchrotron radiation. A diffraction test using the sample of SiO₂ has been accomplished at 1W2B laboratory of Beijing Synchrotron Radiation Source. The data of the beam test were analyzed and some diffraction angles were obtained. The experimental results were in good agreement with standard data from ICDD powder diffraction file. The precision of diffraction angles was 1% to 4.7%. Most of the relative errors between measured values of diffraction angles and existing data were less than 1%. As for the detector, the best position resolution in the test was 138 μm (σ value) with an X-ray tube. Finally, discussions of the results were given. The major factor that affected the precision of measurement was deviation from the flat structure of the detector. The effect was analyzed and the conclusion was reached that it would be the optimal measurement scheme when the distance between the powder sample and detector was from 400 mm to 600 mm.     

Superconductivity in self-flux-synthesized single crystalline R_2Pt_3Ge_5(R=La,Ce,Pr)

In order to study the basic superconductivity properties of R_2Pt_3Ge_5, we synthesized the single crystalline samples by the Pt–Ge self-flux method. R_2Pt_3Ge_5(R = La, Ce) were also grown for a systematic study. Zero-resistivity was observed in both the La-and Pr-based samples below the reported superconducting transition temperatures. However, magnetic susceptibility measurements showed low superconductivity volume fractions in both La_2Pt_3Ge_5 and R_2Pt_3Ge_5(less than2%). Ce_2Pt_3Ge_5 did not show any signature of superconductivity. From the specific heat measurements, we did not observe a superconducting transition peak in R_2Pt_3Ge_5, suggesting that it is not a bulk superconductor. The magnetic susceptibility and heat capacity measurements revealed two antiferromagnetic(AFM) orders in R_2Pt_3Ge_5 at T_(N1)= 4.2 K and T_(N2)= 3.5K, as well as a single AFM transition at TN= 3.8 K in Ce_2Pt_3Ge_5.     

轻质金属泡沫夹芯曲板的抗爆炸冲击响应研究

夹芯结构具有高比强度、高比刚度和优异的吸能能力,已经被广泛应用于工程结构用来抵御高强度的爆炸冲击载荷。本文采用有限元数值模拟方法研究了爆炸载荷作用下四边固支夹芯曲板的动力响应。比较了同等质量下夹芯曲板、夹芯平板、实体曲板和实体平板四种结构的抗爆炸冲击性能,讨论了不同曲率和非对称因子对结构动力响应的影响,得到了使得夹芯曲板抗爆炸性能最佳的非对称因子。研究结果表明：夹芯曲板的抗爆炸冲击性能优于等质量的夹芯平板、实体曲板和实体平板结构,增大夹芯曲板的曲率能够提高结构的抗爆炸冲击性能。     

基于复合结构的气体电子倍增器增益模拟和实验研究

气体电子倍增器(GEM)作为高性能的微结构气体探测器在高能物理相关领域内得到了广泛的研究和应用.其中增益是GEM探测器基本性能研究中的一个重要参数,该值的精确测量至关重要.增益的测量一般采用电流测量或者能谱测量方法,但均存在精度较低或者过程繁琐的问题,且无法精确测量低增益值.针对GEM探测器增益的精确测量,本文提出了一种由GEM探测器与微网结构气体探测器(MM)级联构成的复合结构探测器(GEM-MM).利用GEM-MM结构以相对方法实现GEM增益的精确测量.该方法既可以省去传统方法中复杂的电子学标定过程,同时不需要进行原初电离电子数的估算,保证了增益的精确测量,并且可以实现GEM低增益的测量.基于GEM-MM测量GEM增益的原理,本文首先对GEM-MM电荷输运过程进行了模拟研究,优化了合适的工作电压.比较了三种不同类型和配比工作气体下GEM增益模拟结果,并在Ar/iC_4H_(10)(95/5)气体中测量了单层GEM在3—24范围内的有效增益.不同Penning系数下GEM增益的模拟结果表明,Penning系数为0.32时GEM增益的模拟结果与实验测量结果符合得很好.由此可以确定一个大气压下的Ar/iC_4H_(10)(95/5)气体中,Penning系数为0.32±0.01.     

Canard轨迹原理

为了精确的求出Canard轨迹的描述方程,提出了一个分段表达的非线性模型,能直接求出一个非线性二阶自治方程的相轨迹方程的解析解,能定量求出Canard轨迹的描述方程和参数条件,可以用两类方程简单描述所有的Canard轨迹. 关键词： 非线性系统 Canard轨迹 弛张振荡     

散裂中子源高气压二维位置灵敏3He探测器的实验研究

为满足中国散裂中子源多功能反射谱仪中子探测器的基本物理要求:有效面积达到200 mm×200 mm、探测效率大于50%（2Å）、位置分辨好于2 mm等,中国科学院高能物理研究所研制了3He高气压二维多丝正比室位置灵敏中子探测器。该探测器采用二维多丝室结构,腔体内充3He/C₃H₈（6 atm/2.5 atm）的组合气体。本文首先利用Am/Be中子源完成对探测器全面积均匀性测试,均匀性指标达到了95.1%;探测器在中国散裂中子源的20号束流线站安装后,对其进行了在束测量,通过飞行时间选取波长2.8Å的慢中子,测量了探测器二维位置分辨和二维成像性能。在X方向（垂直于阳极丝的方向）的位置分辨为0.99 mm,Y方向（平行于阳极丝的方向）的位置分辨为1.36 mm,探测器具有很好的二维位置分辨和二维成像能力。测量结果表明探测器满足反射谱仪的研制要求。     

Kr2+辐照导致的Ca8LnNa(PO4)6F2(Ln=La,Nd和Sm)磷灰石结构陶瓷材料的非晶转变

采用传统固相烧结法成功制备出磷灰石结构材料Ca₈LnNa（PO₄）₆F₂（Ln=La,Nd和Sm）,并通过常规X射线衍射（X-ray diffraction,XRD）进行表征确定三种样品都为单一相。在室温条件下用800 keVKr2+对三种样品进行辐照实验,辐照后的样品利用掠入射X射线衍射（grazing incidence X-ray diffraction,GIXRD）进行表征获取其表面辐照损伤层的结构信息。发现在实验辐照剂量范围内（1.0×1014~7.0×1014cm-2）三种样品都发生了从晶体结构到非晶结构的转变,不过三种样品的抗辐照非晶性能却有差异,抗辐照非晶能力大小关系是Ca₈LaNa（PO₄）₆F₂ > Ca₈NdNa（PO₄）₆F₂ > Ca₈SmNa（PO₄）₆F₂。这是由于在Ca₈LnNa（PO₄）₆F₂中,当镧系核素半径越小时,将有更大概率占据Ca（2）位置与F形成比Ca-F更弱的离子键。因此,镧系核素半径越小,辐照下将有更多的点缺陷保留下来,更容易发生非晶相变。