Conversion of Mg‐Li Bimetallic Alloys to Magnesium Alkoxide and Magnesium Oxide Ceramic Nanowires

Technologically important composites with enhanced thermal and mechanical properties rely on the reinforcement by the high specific strength ceramic nanofibers or nanowires (NWs) with high aspect ratios. However, conventional synthesis routes to produce such ceramic NWs have prohibitively high cost. Now, direct transformation of bulk Mg‐Li alloys into Mg alkoxide NWs is demonstrated without the use of catalysts, templates, expensive or toxic chemicals, or any external stimuli. This mechanism proceeds through the minimization of strain energy at the boundary of phase transformation front leading to the formation of ultra‐long NWs with tunable dimensions. Such alkoxide NWs can be easily converted in air into ceramic MgO NWs with similar dimensions. The impact of the alloy grain size and Li content, synthesis temperature, inductive and steric effects of alkoxide groups on the diameter, length, composition, ductility, and oxidation of the produced NWs is discussed.     

Achieving Superior Electrocatalytic Performance by Surface Copper Vacancy Defects during Electrochemical Etching Process

Vacancy defects of catalysts have been extensively studied and proven to be beneficial to various electrocatalytic reactions. Herein, an ultra‐stable three‐dimensional PtCu nanowire network (NNW) with ultrafine size, self‐supporting rigid structure, and Cu vacancy defects has been developed. The vacancy defect‐rich PtCu NNW exhibits an outstanding performance for the oxygen reduction reaction (ORR), with a mass activity 14.1 times higher than for the commercial Pt/C catalyst (20 %.wt, JM), which is currently the best performance. The mass activity of the PtCu NNW for methanol oxidation reaction (MOR) is 17.8 times higher than for the commercial Pt/C catalyst. Density‐functional theory (DFT) calculations indicate that the introduction of Cu vacancies enhances the adsorption capacity of Pt atoms to the HO* intermediate and simultaneously weakens the adsorption for the O* intermediate. This work presents a facile strategy to assemble efficient electrocatalysts with abundant vacancy defects, at the same time, provides an insight into the ORR mechanism in acidic solution.     

Ag@Au Core‐Shell Nanowires for Nearly 100 % CO2‐to‐CO Electroreduction

Electrochemical reduction of carbon dioxide (CO₂) to CO is regarded as an efficient method to utilize the greenhouse gas CO₂, because the CO product can be further converted into high value‐added chemicals via the Fisher–Tropsch process. Among all electrocatalysts used for CO₂‐to‐CO reduction, Au‐based catalysts have been demonstrated to possess high selectivity, but their precious price limits their future large‐scale applications. Thus, simultaneously achieving high selectivity and reasonable price is of great importance for the development of Au‐based catalysts. Here, we report Ag@Au core–shell nanowires as electrocatalyst for CO₂ reduction, in which a nanometer‐thick Au film is uniformly deposited on the core Ag nanowire. Importantly, the Ag@Au catalyst with a relative low Au content can drive CO generation with nearly 100 % Faraday efficiency in 0.1 m KCl electrolyte at an overpotential of ca. ?1.0 V. This high selectivity of CO₂ reduction could be attributed to a suitable adsorption strength for the key intermediate on Au film together with the synergistic effects between the Au shell and Ag core and the strong interaction between CO₂ and Cl^? ions in the electrolyte, which may further pave the way for the development of high‐efficiency electrocatalysts for CO₂ reduction.     

AlN纳米线宏观阵列的制备

借助二次模板法成功的合成了AlN纳米线宏观阵列,并进行了表征.主要研究CVD法制备有一定取向,直径均匀的AlN纳米线宏观阵列的过程.通过气相沉积法和利用PS球自组装模板制备了金属纳米颗粒模板;再以模板上的金属纳米颗粒作为催化剂,利用化学气相沉积在模板上合成AlN纳米线宏观阵列.借助SEM,TEM观察所得样品,AlN纳米线阵列面积约为0.3 mm×0.2 mm,直径和长度分布均匀,平均直径约为41 nm,平均长度为1.8 μm左右,分散密度和覆盖率大的六角结构AlN纳米线宏观阵列.得到了可控制备AlN纳米线 关键词： AlN纳米线阵列 模板法 CVD法 SEM     

Highly Flexible and Nonflammable Inorganic Hydroxyapatite Paper

A highly flexible and nonflammable inorganic hydroxyapatite (HAP) paper made from HAP ultralong nanowires is reported. The paper can be used for printing and writing and is promising for the permanent and safe storage of information, such as archives and important documents. The HAP paper is also an excellent and recyclable adsorbent for organic pollutants.     

Assembly of Na3V2(PO4)3 Nanoparticles Confined in a One‐Dimensional Carbon Sheath for Enhanced Sodium‐Ion Cathode Properties

Structural and morphological control is an effective approach for improvement of electrochemical properties in rechargeable batteries. One‐dimensionally assembled structure composed of NASICON‐type Na₃V₂(PO₄)₃ nanoparticles were fabricated through an electrospinning method to meet the requirements for the development of efficient electrode materials in Na‐ion batteries. High‐temperature treatment of electrospun precursor fibers under an argon flow provides a nonwoven fabric of nanowires comprising crystallographically oriented nanoparticles of NASICON‐type Na₃V₂(PO₄)₃ within a carbon sheath. The mesostructure comprising NASICON‐type Na₃V₂(PO₄)₃ and carbon give a short sodium‐ion transport pass and an efficient electron conduction pass. Electrochemical properties of NASICON‐type Na₃V₂(PO₄)₃ are improved on the basis of one‐dimensional nanostructures designed in the present study.     

直流电弧自催化合成β-SiC纳米线

采用C,Si和SiO₂为反应原料,利用直流电弧法制备出长直的β-SiC纳米线。纳米线的直径为100～200 nm,长度为10～20 μm,并且沿着<111>方向生长。通过X射线衍射(XRD)、扫描电子显微术(SEM)、透射电子显微术(TEM)、拉曼光谱等手段,对β-SiC纳米线进行表征。探讨了β-SiC纳米线自催化气-液-固(VLS)生长机制。     

Fabrication of Sensitive Potentiometric Cholesterol Biosensor Based on Co3O4 Interconnected Nanowires

Highly sensitive, selective, reliable and inexpensive cholesterol biosensors are highly demanded for the routine monitoring of cholesterol molecules in order to prevent heart failure incidents. In this study, Co₃O₄ nanostructures are synthesized using polyvinyl pyrrolidone surfactant as growth template by a low temperature aqueous chemical growth method. The morphology of nanostructures was investigated by scanning electron microscopy and X‐ray diffraction techniques. The nanostructures exhibit interconnected nanowires like morphology with interconnected network of nanowires. The nanostructures of Co₃O₄ are polycrystalline. The cholesterol oxidase was physically adsorbed on the interconnected nanowires of Co₃O₄ for the chemical sensing of cholesterol molecules. The sensor device detected a wide range of cholesterol from 1×10^?7 M to 1×10^?3 M concentrations with sensitivity of ?94.031 mV/decade. A detection limit of 0.035×10^?7 M cholesterol concentration was observed and a fast response time of 10 s was also noticed. The fabricated device is highly stable, selective, sensitive, reproducible and repeatable. All the collected information about presented cholesterol biosensor indicates its potential application for the monitoring of cholesterol concentrations from human blood serum and real‐life samples.