高岭石基复合材料在光催化领域应用的研究进展

环境污染和能源紧缺已成为当今社会亟须解决的重大问题。高岭石基复合材料光催化处理技术因绿色环保、经济安全、无二次污染而备受关注。鉴于高岭石在光催化领域的研究现状,本文介绍了高岭石的层状硅酸盐结构特征及其在光催化领域的应用优势,综述了高岭石基光催化材料的主要类型、基本特征、合成方法、改性过程、光催化特点及其应用进展与优势,最后,提出了高岭石基复合材料在光催化领域应用的重点研究方向。以期获得制备工艺简单、光催化性能优异、原料易获取且无环境污染的高岭石基光催化复合材料,从根本上解决环境污染问题,缓解能源紧缺危机。     

石墨烯负载的氧配位钴单原子稳定金属锂负极

Lithium (Li)-based batteries are the dominant energy source for consumer electronics, grid storage, and electrified transportation. However, the development of batteries based on graphite anodes is hindered by their limited energy density. With its ultrahigh theoretical capacity (3860 mAh∙g⁻¹), low redox potential (−3.04 V), and satisfactorily low density (0.54 g∙cm⁻³), Li metal is the most promising anode for next-generation high-energy-density batteries. Unfortunately, the limited cycling life and safety issues raised by dendrite growth, unstable solid electrolyte interphase, and "dead Li" have inhibited their practical use. An effective strategy is to develop a suitable lithiophilic matrix for regulating initial Li nucleation behavior and controlling subsequent Li growth. Herein, single-atom cobalt coordinated to oxygen sites on graphene (Co-O-G SA) is demonstrated as a Li plating substrate to efficiently regulate Li metal nucleation and growth. Owing to its dense and more uniform lithiophilic sites than single-atom cobalt coordinated to nitrogen sites on graphene (Co-N-G SA), high electronic conductivity, and high specific surface area (519 m²∙g⁻¹), Co-O-G SA could significantly reduce the local current density and promote the reversibility of Li plating and stripping. As a result, the Co-O-G SA based Li anodes exhibited a high Coulombic efficiency of 99.9% at a current density of 1 mA∙cm⁻² with a capacity of 1 mAh∙cm⁻², and excellent rate capability (high current density of 8 mA∙cm⁻²). Even at a high plating capacity of 6 mAh∙cm⁻², the Co-O-G SA electrode could stably cycle for an ultralong lifespan of 1300 h. In the symmetric battery, the Co-O-G SA based Li anode (Co-O-G SA/Li) possessed a stable voltage profile of 18 mV for 780 h at 1 mA∙cm⁻², and even at a high current density of 3 mA∙cm⁻², its overpotential maintained a small hysteresis of approximately 24 mV for > 550 h. Density functional theory calculations showed that the surface of Co-O-G SA had a stronger interaction with Li atoms with a larger binding energy, −3.1 eV, than that of Co-N-G SA (−2.5 eV), leading to a uniform distribution of metallic Li on the Co-O-G SA surface. More importantly, when matched with a sulfur cathode, the resulting Co-O-G SA/lithium sulfur full batteries exhibited a high capacity of 1002 mAh∙g⁻¹, improved kinetics with a small polarization of 191 mV, and an ultralow capacity decay rate of 0.036% per cycle for 1000 cycles at 0.5C (1C = 1675 mA∙g⁻¹) with a steady Coulombic efficiency of nearly 100%. Therefore, this work provides novel insights into the coordination environment of single atoms for the chemistry of Li metal anodes for high-energy-density batteries.     

铟镓共掺杂对n-ZnO纳米棒/p-GaN异质结生长行为和光电性能的影响

利用低温水热法在p-GaN薄膜上生长了铟(In)和镓(Ga)共掺杂的ZnO纳米棒。X射线衍射(XRD)、X射线光电子能谱(XPS)和X射线能量色谱仪(EDS)结果表明,In和Ga已固溶到ZnO晶格中。扫描电子显微镜(SEM)结果表明, ZnO纳米棒具有良好的c轴取向性,随着In和Ga共掺杂浓度的增加,纳米棒的直径减小,密度增加。XRD结果表明,In和Ga共掺杂引起ZnO晶格常数增大,导致(002)衍射峰向低角度方向偏移。同时,ZnO的光学性质受到In和Ga共掺杂的影响。与纯ZnO相比, 共掺杂ZnO纳米棒的紫外发射峰都出现轻微红移,这是表面共振和带隙重整效应综合作用的结果。I-V特性曲线表明,随着In和Ga共掺杂浓度的增加,n-ZnO纳米棒/p-GaN异质结具有更好的导电性。     

地球化学模拟在高放废物地质处置中的应用与发展

随着核能事业的发展,高放废物的处理和处置问题日益突出.其中,研究高放废物在环境介质中的吸附、扩散和迁移行为是获取放射性核素对周围环境和人群健康影响的基础参数的最重要和最直接的途径.近年来,人们利用已有的实验数据及核素的基础热力学和动力学数据,附以相应的数学模型,建立了一些地球化学模拟软件,用于分析核素在地质介质中可能发生的连续性和长期性变化.目前,国内外常用的地球化学模拟软件有十多种.本文从热力学平衡计算原理、种态分布计算方法和表面配位模型假设等几个方面对地球化学模拟软件进行了简要介绍,对近年来地球化学模拟软件在核素种态分布计算和表面配位模型模拟两方面的应用进行了举例分析,并以Ca-U-CO3配合物为例,说明完备的热力学数据对地球化学模拟软件发展的重要性,以期促进我国地球化学模型的应用和发展.     

A multi-functional polymer coating that is heat-resistant,hydrophobic and transparent

A multi-functional polymer film with high hydrophobicity and transparency was formed by simple casting of a polycarbonate solution onto a substrate having micro-scale roughness.The high hydrophobicity was heat-resistant,which can be retained up to 390 ℃.The polymer film may have potentially wide-ranging applications in industry and high technology.     

微波消解ICP-MS测试锌精矿中的铟和锗

本文提出了锌精矿通过微波消解,上ICP-MS测试得到铟和锗含量的方法。通过对样品分解方式的选择和质谱干扰扣除以及加标回收实验,得到铟的回收率在96.26%-98.70%,锗的回收率在99.6%-101%。通过检出限实验得到铟的检出限为0.001ug/g,锗的检出限为0.02ug/g。验证了本方法的可靠性。     

光触发自修复聚合物研究进展

近几年,由于光触发自修复聚合物具有可控快速等优势,其在自修复聚合物领域中占据了重要的地位。光触发自修复聚合物实现自修复的方法主要分为3类,分别是基于光交联反应的自修复、基于光触发交换反应的自修复和基于光热效应的自修复。本文主要从光触发自修复聚合物的修复机制以及修复过程中涉及的化学本质两个方面,重点阐述了上述3类光触发自修复方法的最新研究进展,强调3种光触发自修复之间的联系和共同点。同时,对光触发自修复聚合物未来的发展前景进行了展望。     

M区块不同配制水质对聚驱开发效果影响研究

M区块目前应用聚驱三次采油技术来进一步提高原油采收率,研究不同水质配制的聚合物溶液对驱油效果的影响,运用数值模拟方法,在历史拟合的基础上对试验区剩余油分布进行了描述,并设计了4种不同水质条件下的聚合物配制方案,进行聚驱效果影响研究.研究结果表明,在聚合物浓度和注入速度均相同的前提下,清配清稀配制的聚合物溶液驱油效果最好,污配污稀曝氧后驱油效果略好于污配污稀曝氧前,清配污稀驱油效果最差,与水驱相比采收率提高值分别为10.11%、9.04%、8.59%和8.18%.     

碱性电解液中K3[Fe(CN)6]在锌阳极上的自发还原和吸附延长锌镍电池的循环寿命

In view of the continuously worsening environmental problems, fossil fuels will not be able to support the development of human life in the future. Hence, it is of great importance to work on the efficient utilization of cleaner energy resources. In this case, cheap, reliable, and eco-friendly grid-scale energy storage systems can play a key role in optimizing our energy usage. When compared with lithium-ion and lead-acid batteries, the excellent safety, environmental benignity, and low toxicity of aqueous Zn-based batteries make them competitive in the context of large-scale energy storage. Among the various Zn-based batteries, due to a high open-circuit voltage and excellent rate performance, Zn-Ni batteries have great potential in practical applications. Nevertheless, the intrinsic obstacles associated with the use of Zn anodes in alkaline electrolytes, such as dendrite, shape change, passivation, and corrosion, limit their commercial application. Hence, we have focused our current efforts on inhibiting the corrosion and dissolution of Zn species. Based on a previous study from our research group, the failure of the Zn-Ni battery was caused by the shape change of the Zn anode, which stemmed from the dissolution of Zn and uneven current distribution on the anode. Therefore, for the current study, we selected K₃[Fe(CN)₆] as an electrolyte additive that would help minimize the corrosion and dissolution of the Zn anode. In the alkaline electrolyte, [Fe(CN)₆]^3– was reduced to [Fe(CN)₆]^4– by the metallic Zn present in the Zn-Ni battery. Owing to its low solubility in the electrolyte, K₄[Fe(CN)₆] adhered to the active Zn anode, thereby inhibiting the aggregation and corrosion of Zn. Ultimately, the shape change of the anode was effectively eliminated, which improved the cycling life of the Zn-Ni battery by more than three times (i.e., from 124 cycles to more than 423 cycles). As for capacity retention, the Zn-Ni battery with the pristine electrolyte only exhibited 40% capacity retention after 85 cycles, while the Zn-Ni battery with the modified electrolyte (i.e., containing K₃[Fe(CN)₆]) showed 72% capacity retention. Moreover, unlike conventional organic additives that increase electrode polarization, the addition of K₃[Fe(CN)₆] not only significantly reduced the charge-transfer resistance in a simplified three-electrode system, but also improved the discharge capacity and rate performance of the Zn-Ni battery. Importantly, considering that this strategy was easy to achieve and minimized additional costs, K₃[Fe(CN)₆], as an electrolyte additive with almost no negative effect, has tremendous potential in commercial Zn-Ni batteries.