基于多角度偏振特性的云相态识别及验证

云相态识别是云参数研究的重要组成部分,为了有效识别水云和冰云,根据水云和冰云微物理性质的差别,研究了水云和冰云的单次散射特性,采用基丁倍加累加法的,人量辐射传输方程模拟了水云和冰云的多角度偏振特件.模拟结果表明,光谱的多角度偏振特件能够体现山水云粒子和冰云粒子微物理性质的差异,云在特定方向反射的偏振辐射强度对云相态非常敏感,可以用米进行云相念的识别,在模拟的基础上进行了云相态识别算法的研究,并利用多角度偏振卫星数据--POLDER 0.865μm通道数据进行了实例分析.识别结果与MODIS云相态产品及其1.38μm卷云榆测结果进行了比较.分析结果表明,基于多角度偏振特性云相态识别算法可以有效地进行云相态识别.     

并联换热系统中冷媒分配的优化分析

为减小并联换热系统的质量,本文在一定的简化和假设之上,建立了其流动与传热的物理和数学模型;并以系统总换热面积最小为优化目标,通过对分配系数的变量转换,提出了一种可准确求解最佳分配系数的方法,并对计算结果进行了讨论,发现分配系数的结果与势容耗散最大基本一致.根据计算结果.本文给出了支路较少时分配系数与换热支路效能之间的近似关联式.     

Entanglement in One-Dimensional Random XY Spin Chain with Dzyaloshinskii--Moriya Interaction

The impurities of exchange couplings, external magnetic fields and Dzyaloshinskii-Moriya （DM） interaction considered as Gaussian distribution, and the entanglement in one-dimensional random XY spin systems is investigated by the method of solving the different spin-spin correlation functions and the average magnetization per spin. The entanglement dynamics at central locations of ferromagnetic and antiferromagnetic chains have been studied by varying the three impurities and the strength of DM interaction. （i） For the ferromagnetic spin chain, the weak DM interaction can improve the amount of entanglement to a large value, and the impurities have the opposite effect on the entanglement below and above critical DM interaction. （ii） For the antiferromagnetic spin chain, DM interaction can enhance the entanglement to a steady value. Our results imply that DM interaction strength, the impurity and exchange couplings （or magnetic field） play competing roles in enhancing quantum entanglement.     

活性靶技术熔合截面测量极限研究

天体环境中丰中子核素熔合反应率对研究中子星表面超级暴现象的点火机制有重要意义。由于次级束流强过低,无法使用传统固体靶实验技术测量垒下熔合反应截面。活性靶技术的发展为垒下丰中子核素熔合反应截面的测量提供了可行的途径。基于Geant4模拟详细地分析了多重采样电离室（MUSIC）与时间投影室（TPC）两种活性靶探测器中熔合反应与弹性散射的运动学性质,给出了4种熔合反应鉴别判据,并且计算了由这些判据误判引起的熔合截面系统误差。在E_cm=13.6 MeV时,MUSIC与TPC的弹性散射误判截面分别为0.5 mb和2.9×10-3 mb,都远小于此时熔合截面（877 mb）。在垒下,MSUIC的熔合截面系统误差已经超出实验测量要求,而TPC能够进行实验测量的能量可以降低至E_cm=4.7 MeV。Reaction rates of fusion reactions among neutron-rich nuclei in the astrophysical environment are of great significance to understand the ignition of superbursts on neutron stars. Since beam intensity is rather low for radioactive ion beams, it is extremely difficult to operate a direct measurement for cross sections of such fusion reactions below the Coulomb barrier using thick target technique. In this case, a novel technique, active target technique, has been developed recently. To study the energy limit for measurement below Coulomb barrier, the kinematics of elastic scattering and fusion reaction in MUSIC and TPC are discussed with Geant4 simulation. Four identification methods are used and uncertainties of cross sections resulted from misjudgments are calculated. With E_cm=13.6 MeV, the uncertainties of cross sections for MUSIC and TPC are 0.5 mb and 2.9×10-3 mb, respectively. The uncertainties for MUSIC become far beyond measurement when below coulomb barrier, while TPC remains to be a suitable detector for measuring fusion cross sections until E_cm=4.7 MeV.     

First principles study of ceramic materials (IVB group carbides) under ultrafast laser irradiation

Group IVB carbides have been applied in extreme aerospace environments as hard ceramic coatings; ZrC is being considered as a replacement for SiC in nuclear reactors. Therefore, a thorough understanding of the laser irradiation response of group IVB carbides is of clear significance. However, the existing knowledge on the fundamental properties of IVB group carbides is limited and insufficient with regard to both irradiated and non-irradiated characteristics. We investigate the effect of ultrafast laser irradiation on the lattice stability of ceramic materials(IVB group carbides) using the density functional perturbation theory(DFPT). The calculated phonon frequencies of TiC and ZrC at the ground state are in good agreement with previous calculations and experimental values. The phonon frequencies of IVB group carbides are positive, even though the electronic temperature reached 5 eV. Thus, IVB group carbides are more stable under ultrafast laser irradiation, which has greater benefits in nuclear and aeronautical applications compared to metals(W,Na), semimetals(Bi),and semiconductors(Si,SiC). The thermodynamic properties of ZrC are calculated as functions of their lattice temperature at different electronic temperatures. The elastic shear constants of IVB group carbides satisfy the Born stability criteria at Te = 5 eV. In addition, a comparison of the predicted melting temperatures of IVB group carbides, reveal that HfC is better suited for extreme high-temperature environments.     

异长春花苷内酰胺的光化学降解

报道了异长春花苷内酰胺在水溶液中经自然光照射后, 发生光氧化反应, 主要降解产物为(3S)-短小蛇根草苷. 采用通入氧气和日光灯照射的方法可加速异长春花苷内酰胺光降解, (3S)-短小蛇根草苷的产率为56%.     

CH3O和CO在Pd(111)表面偶联反应机理的理论研究

采用DMol³程序包中的GGA-PW91方法, 结合周期平板模型, 对CH₃O和CO在Pd(111)表面的反应进行了系统研究. 计算结果表明, 吸附在Pd(111)表面顶位上的CO分子中C原子所带正电荷最多, 容易与亲核试剂反应, 化学吸附能稍低, 有利于在表面上移动发生亲电插入反应; CH₃O 在Pd(111)表面fcc穴位吸附稳定, O原子上所带的负电荷较多, 易被亲电试剂进攻. 过渡态搜索表明, Pd(111)表面顶位上的CO与fcc穴位上CH₃O反应生成CH₃OOC的为放热反应, 反应能垒较低, 有利于偶联反应的进行.     

两步烧结法制备碳包覆的LiFePO4/C复合正极材料的研究

采用两步烧结法处理原位合成的碳包覆的LiFePO4/C复合正极材料,采用XRD、SEM对材料的结构及表面形貌进行了表征;通过CV、EIS及充放电测试仪进行电化学性能测试.结果表明,两步烧结法制备的材料具有良好的倍率性能及循环性能.0.2C时的首次放电比容量为142.5 mAh/g,循环30次后,放电比容量仍达到126.9 mAh/g;0.5 C时的首次放电比容量为122.9 mAh/g;1 C时的首次放电比容量为106.4 mAh/g;2 C时的首次充放电为81.3 mAh/g.     

应用型地方院校仪器分析实训教学的探索与实践——以导数紫外分光光度法实训为例

主要探讨将仪器实训教学引入到地方院校应用化学等相关专业的教学体系。尝试“任务领引型”实训模式,将所要学习的知识和实践技能蕴藏在一个或几个具体的任务中,让学生通过循序渐进完成一系列任务,提高学生的综合应用能力。通过教学实践获得较好效果。     

离子液体中聚(3-溴噻吩)的电化学合成和电色效应研究

以1-丁基-3-甲基咪唑六氟磷酸盐离子液体[BMIM]PF₆既作为溶剂又作为支持电介质, 通过恒电流、循环伏安等方法制备聚(3-溴噻吩)(PBrT)膜. 采用红外光谱(FT-IR)和扫描电子显微镜(SEM)对PBrT膜的结构和形貌进行表征, 用热重和差热分析法(TG-DTA)研究聚合膜的热稳定性, 并利用紫外-可见光谱(UV-Vis)、计时电流和计时吸收曲线研究该聚合膜电化学和电致变色的特性. 研究结果表明, 与传统方法比较, 在离子液体[BMIM]PF₆中制备的PBrT膜更致密、光滑, 具有良好的氧化还原可逆性和充放电能力, 电活性高, 热稳定性好. 以该方法制备的PBrT膜颜色变化明显, 响应时间快(0.5 s), 同时由于离子液体具有电位窗宽、导电率高、可循环利用等优点, 因此在电化学聚合等方面具有良好的应用前景.