带射流微小通道热沉的数值模拟及优化

本文对射流与微小通道结合的高热流密度热沉的性能进行了数值模拟。为比较不同结构尺寸的热沉性能,发展了一种同定流体泵功耗比较热源面温度的分析和优化方法,利用该方法对通道深度、喷口深度和通道宽度的影响规律进行了模拟分析和优化,结果表明这种热沉结构存在最优尺寸,最优尺寸和泵功有关。同时模拟结果也表明该热沉具有良好的散热性能,热...     

并联换热系统中冷媒分配的优化分析

为减小并联换热系统的质量,本文在一定的简化和假设之上,建立了其流动与传热的物理和数学模型;并以系统总换热面积最小为优化目标,通过对分配系数的变量转换,提出了一种可准确求解最佳分配系数的方法,并对计算结果进行了讨论,发现分配系数的结果与势容耗散最大基本一致.根据计算结果.本文给出了支路较少时分配系数与换热支路效能之间的近似关联式.     

微尺度下壁面粗糙度对面向导热影响研究

随着空间尺度的缩小,界面对导热的影响就会越来越明显。本文采用非平衡分子动力学模拟方法模拟了壁面的粗糙度对面向导热的影响,并给出微尺度下的粗糙度定义。在模拟中构造了不同的壁面粗糙度,得到了面向热导率随着壁面粗糙度增加而减小的结果。分析认为壁面的镜面反射率随着粗糙度增加而减小,而镜面反射率减小将导致热导率下降．     

Mechanism for Influence of Nose Bluntness on Asymmetric Vortices

Pressure distributions on slender bodies are measured at various roll angles; it is found that the side loads on the blunted-nose slender body are as small as one-third of that on a pointed-nose one, or even zero at some roll angles. Numerical simulation shows that different flow structures are generated on the leeside of the bodies with different noses. The results confirm that a structure of U-shaped horseshoe vortex develops on the top of the blunted nose due to the closed type of surface flow separation. The shear layer separated from the nose is entrapped into the horseshoe vortex core and forms two mainof this structure is to hold in the two main nose vortices andvortices on the two sides of the body. The function to restrict the emergence of asymmetry.     

管肋式辐射器排热特性的数值分析与优化设计

为得到按单面辐射方式布置的管肋式空间辐射器的排热特性，建立了相应的数学模型．采用数值模拟方法分析了管内流体温度、肋片几何尺寸和等效热沉温度对辐射器排热特性的影响，得到了不同参数值下辐射器单位面积排热量以及特定参数范围内的辐射器肋片最佳宽度和肋片效率．数值模拟结果对辐射器的工程结构设计以及空间站热管理方案的优化分析具有一定的参考价值．     

空间太阳能热动力系统的轻量化研究

为了降低系统的质量和阻力面积,运用系统分析的方法,建立了空间站太阳能热动力发电系统的物理和数学模型,提出了发射总重量的系统性能评价准则,并对不同条件下的系统部件质量进行了数值模拟,分析了不同操作参数对系统部件质量的影响规律。研究结果表明,操作参数对系统部件质量有正负两方面的影响,优化这些参数可以明显降低系统的发射总质量。     

Entropy resistance analyses of a two-stream parallel flow heat exchanger with viscous heating

Heat exchangers are widely used in industry, and analyses and optimizations of the performance of heat exchangers are important topics. In this paper, we define the concept of entropy resistance based on the entropy generation analyses of a one-dimensional heat transfer process. With this concept, a two-stream parallel flow heat exchanger with viscous heating is analyzed and discussed. It is found that the minimization of entropy resistance always leads to the maximum heat transfer rate for the discussed two-stream parallel flow heat exchanger, while the minimizations of entropy generation rate, entropy generation numbers, and revised entropy generation number do not always.     

A comparison of different entransy flow definitions and entropy generation in thermal radiation optimization

In thermal radiation, taking heat flow as an extensive quantity and defining the potential as temperature T or the black body emissive power U will lead to two different definitions of radiation entransy flow and the corresponding principles for thermal radiation optimization. The two definitions of radiation entransy flow and the corresponding optimization prin ciples are compared in this paper. When the total heat flow is given, the optimization objectives of the extremum entransy dissipation principles （EEDPs） developed based on potentials T and U correspond to the minimum equivalent temperature difference and the minimum equivalent blackbody emissive power difference respectively. The physical meaning of the definition based on potential U is clearer than that based on potential T, but the latter one can be used for the coupled heat transfer optimization problem while the former one cannot. The extremum entropy generation principle （EEGP） for thermal radiation is also derived, which includes the minimum entropy generation principle for thermal radiation. When the radiation heat flow is prescribed, the EEGP reveals that the minimum entropy generation leads to the minimum equivalent thermodynamic potential difference, which is not the expected objective in heat transfer. Therefore, the minimum entropy generation is not always appropriate for thermal radiation optimization. Finally, three thermal radiation optimization examples are discussed, and the results show that the difference in optimization objective between the EEDPs and the EEGP leads to the difference between the optimization results. The EEDP based on potential T is more useful in practical application since its optimization objective is usually consistent with the expected one.     

带孔硅纳米薄膜热整流及声子散射特性研究

本文基于非平衡的分子动力学模拟方法计算了带有三角形孔的硅纳米薄膜的界面热阻特性,结果表明300-1100 K范围内随着热流方向的改变,在含有三角形孔的硅纳米薄膜中存在热整流效应,热整流系数达28％.同时借助于声子波包动力学模拟方法,获得了不同频率下的纵波声子在三角形孔处的散射特性,结果表明纵波声子在散射过程中产生了横波声子,并且从三角形底部向顶部入射的声子能量透射系数比反向时平均低22％.不对称结构引起的声子透射率的差异是引起热整流效应的主要因素.