Volt-ampere characteristics of a nitrogen DC plasma arc with anode melting

The characteristics of a nitrogen arc using a graphite cathode and a melting anode in a pilot-scale plasma furnace are investigated. The voltage is examined as a function of current and apparent plasma length. The voltage increases non-linearly with the increase of apparent plasma length, with the current fixed. The experimental data so obtained are compared with the predictions of the Bowman model for the electric arc, and with numerical simulations as well. The level of agreement between the experimental data at the melting anode and the numerical predictions confirms the suitability of the proposed the Bowman model. These characteristics are relevant to the engineering design and evaluation of a DC plasma furnace and reactor for the treatment of hazardous fly ash waste.     

Single-Photon Emission from a Single InAs Quantum Dot

Excitation power-dependent micro-photoluminescence spectra and photon-correlation measurement are used to study the optical properties and photon statistics of single InAs quantum dots. Exciton and biexciton emissions, whose photoluminescence intensities have linear and quadratic excitation power dependences, respectively, are identified. Under pulsed laser excitation, the zero time delay peak of second order correlation function corresponding to exciton emission is well suppressed, which is a clear evidence of single photon emission.     

Temperature Dependence of Photoluminescence from Single and Ensemble InAs/GaAs Quantum Dots

We investigate the temperature dependence of photoluminescence from single and ensemble InAs/GaAs quantum dots systematically. As temperature increases, the exciton emission peak for single quantum dot shows broadening and redshift. For ensemble quantum dots, however, the exciton emission peak shows narrowing and fast redshift. We use a simple steady-state rate equation model to simulate the experimental data of photoluminescence spectra. It is confirmed that carrier-phonon scattering gives the broadening of the exciton emission peak in single quantum dots while the effects of carrier thermal escape and retrapping play an important role in the narrowing and fast redshift of the exciton emission peak in ensemble quantum dots.     

地基高频加热激励ELF/VLF波对辐射带高能电子的准线性散射

地球内、外辐射带电子通量的变化对于空间飞行器,尤其是中低轨卫星的防护有着非常重要的影响.基于回旋共振波粒相互作用的准线性理论,使用地基高频发射器发射电波调制低电离层背景电流可以人工激励ELF/VLF波,这些波能使辐射带相对论电子发生抛射角散射沉降进入大气层从而降低其生存期.为了定量地分析人工激励ELF/VLF波散射辐射带高能粒子的可行性,针对内、外辐射带,本文选取了两个典型区域：L=4.6和L=1.5.数值计算结果表明,在内、外辐射带由于ELF/VLF波的人工注入而造成的高能电子损失时间尺度很大程度上取决于冷等离子体参量α^*(∝B²/N₀,这里B是背景磁场,N₀是电子数密度)、电波频谱特性和功率,以及与波发生回旋共振的电子能量.一般来讲,在外辐射带人工ELF/VLF哨声波散射相对论电子使之沉降到大气层要容易得多;低能量的高能电子(200keV)要比高能量的相对论电子(500keV)更有效地通过抛射角散射进入大气层.考虑到高频电波加热电离层激励的ELF/VLF波可能会被捕获在磁层空腔中,来回反射从而得到增强,因此在适当的条件下,地基高频加热装置发射足够的电波功率进入电离层诱导大幅度ELF/VLF波注入到内磁层,能够在1至3天的时间尺度内快速散射外辐射带相对论电子使之沉降,也能够在10天量级的时间尺度里散射生存周期一般为100天甚至更长的内辐射带相对论电子. 关键词： 地基高频加热电离层 ELF/VLF波激励 高能电子散射和沉降 共振波粒相互作用     

分光计测定光栅常数

针对分光计测定光栅常数实验中入射光线偏离光栅法线的情形,提出了计算光栅常数的一个近似表达式。在不增加额外测量的前提下,使实验结果更接近于实际值。     

Rational Design of Two-Dimensional Magnetic Chromium Borides Based on First-Principles Calculation

Two-dimensional(2D) magnetic materials have been experimentally recognized recently,however,the Curie temperatures(TC) of known 2D systems are quite low.Generally,magnetic systems can be seen as constituent magnetic elements providing spins and the non-magnetic elements providing frameworks to host the magnetic elements.Short bond lengths between the magnetic and non-magnetic elements would be beneficial for strong magnetic interactions and thus high TC.Based on this,we propose to combine the magnetic element Cr and the non-magnetic element boron to design novel 2D magnetic systems.Using our self-developed software package IM2 ODE,we design a series of chromium-boride based 2D magnetic materials.Nine stable magnetic systems are identified.Among them,we find that CrB4-Ⅰ,CrB4-Ⅱ and CrBs-Ⅰ with common structural units [CrB8] are ferromagnetic metals with estimated TC of 270 K,120 K and 110 K,respectively.On the other hand,five CrB3 phases with structural units [Cr2B12] are antiferromagnetic metals.Additionally,we also find one antiferromagnetic semiconductor CrB2-Ⅰ.Our work may open new directions for identifying 2D magnetic systems with high TC.     

First-principles investigation on ideal strength of B2 NiAl and NiTi alloys

For B2 NiAl and NiTi intermetallic compounds, the ideal stress–strain image is lack from the perspective of elastic constants. We use first-principles calculation to investigate the ideal strength and elastic behavior under the tensile and shear loads. The relation between the ideal strength and elastic constants is found. The uniaxial tension of NiAl and NiTi along <001> crystal direction leads to the change from tetragonal path to orthogonal path, which is driven by the vanishing of the shear constant C(66). The shear failure under {110}{111} shear deformation occurring in process of tension may result in a small ideal tensile strength(~ 2 GPa) for NiTi. The unlikeness in the ideal strength of Ni Al and Ni Ti alloys is discussed based on the charge density difference.     

N型TOPCon晶硅太阳能电池光注入退火增效的研究

N型隧穿氧化层钝化接触(Tunnel Oxide Passivating Contacts,TOPCon)太阳能电池完成印刷烧结后,再经过光注入,效率有明显提升,主要表现在V_oc(开路电压)及FF(填充因子)的提升。其机理在于通过温度和光照强度调节费米能级变化,控制H总量及价态来提高钝化性能。钝化膜层的质量、硅基体掺杂浓度、光注入退火时的工艺温度等对光注入退火工艺提升效率有很大影响。实验证明转换效率越低的电池片经过光注入后效率提升幅度越大;转换效率越高的电池片缺陷会更小,经过光注入退火工艺后几乎无增益。另外同心圆在经过光注入退火工艺后会明显消除。本文主要研究温度、光强、基体电阻率、正表面金属接触面积大小、poly-Si(多晶硅)厚度对光注入退火工艺增效的影响。