回转体表面条纹沟槽减阻水洞实验研究

本文在条纹沟槽表面减阻理论分析的基础上,对条纹沟槽表面回转体进行了大量的水洞实验研究。实验模型表面条纹沟槽采用直接加工方法,头部线型为双参数平方根圆头曲线,尾部线型为双参数尖尾曲线。实验结果分析表明,与相同形状、尺寸的光滑表面回转体相比,条纹沟槽表面回转体在一定速度范围内存在很好的减阻效果,最大减阻量超过6%,且在小攻角范围内减阻量基本稳定,对回转体升力特性也没有影响。对比不同尺寸条纹沟槽的减阻效果发现,降阻量不但随条纹沟槽宽度S变化,而且随来流速度U∞变化,即与无因次沟槽宽度S (文中近似取S =S.LRe2Ckx,其中k为总阻力Cx的修正因子)存在着一定的关系。对于V型条纹沟槽具有减阻效果的S 的范围在10到60之间。本文研究证明,条纹沟槽表面减阻技术在水下航行器设计领域有着很好的应用前景,同时文中所取得的研究成果对该技术的应用具有一定的促进作用。     

Ultrasonic devulcanization of waste rubbers: Experimentation and modeling

Continuous ultrasonic devulcanization of ground tire rubber (GRT) and styrene-butadiene rubber (SBR) is considered. Experiments are performed under various processing conditions. Two recipes of SBR with different amounts of polysulfidic linkages are utilized. Gel fraction and crosslink density of devulcanized rubbers are measured and a unique relationship between them is established. Die characteristics with and without imposition of ultrasonic waves are determined. Devulcanized samples are revulcanized and mechanical properties are measured. In some cases, properties of revulcanized SBR samples exceeded those of virgin vulcanizates. This is explained based on the presence of a double network in the revulcanized rubber. A modification of acoustic cavitation and flow modeling of ultrasonic devulcanization of SBR and GRT is proposed using a concept of effective viscosity characterizing the flow of vulcanized particles before devulcanization combined with a shear rate, temperature and gel fraction-dependent viscosity of devulcanized rubber. Velocity, shear rate, pressure, and temperature field along with gel fraction, crosslink density and number of bonds broken are simulated. Predicted data on gel fraction, crosslink density, and pressure using the present modification of the model are found to be closer to experimental data then previously reported.Dedicated to the memory of Professor Tasos C. Papanastasiou     

Experimental Determination of the Longitudinal Dispersivity During the Injection of a Micro-Cement Grout in a One-Dimensional Soil Column

In order to describe the basic phenomenon of miscible grout propagation during the injection in a saturated and deformable porous medium, a general mathematical model was proposed, which accounts for the existing coupling between the fluid flow analysis, the miscible grout transport, and the solid skeleton deformation, leading to a realistic prediction of the injected zone. The development of the model was made concurrently with laboratory experiments to determine the model parameters. This paper describes the determination of the longitudinal dispersivity during the transport of a micro-cement grout injected in a one-dimensional soil column, by relying on image processing analysis. The application concerned here is the injection of soils for improving their properties, that is, to reduce permeability, increase mechanical strength or reduce the deformability. The longitudinal dispersion coefficient is an essential parameter governing the mixing process and the evolution of the transition zone, and thus the injection efficiency. Finally, the comparison between simulated results from the developed model and experimental data, essential to validate the model from a phenomenological standpoint, is made.     

????????????????????????????????

 在条纹沟槽表面减阻的研究发展及其优点的基础上 对条纹沟槽表面减阻进行水洞实验,研究在航行器外表面加工条纹沟槽所具有的阻 力特性. 通过对光体、0.1mmV型条纹沟槽表面和0.2mmV型条纹沟槽表面3 种不同模型在零攻角、不同水流速度下进行阻力测量, 测得条纹沟槽表面减阻特 性曲线. 从特性曲线中可以看出减阻效果约为8.3%. 实验的结果表明, 条纹沟槽 表面能明显降低水下航行器的阻力.     

Parameter identification for viscoelastic materials

Starting from the general stress-strain relation for a linear Boltzmann-Volterra material, which is in agreement with the principle of inertia, a new identification procedure is proposed. Instead of running one long-range relaxation experiment, following asingle suitably specified deformation history, material characterization is done using the data ofn short relaxation experiments followingn different deformation histories. To interpret these data a direct non-iterative algorithm has been developed. Compared with other methods, for example curve fitting by using Gauss' method, this direct method is numerically stable and allows a simple direct evaluation of the error due to the scattering of experimental data. The method has been applied to the determination of the relaxation times of an unsaturated polyester material.     

Nonstationary deformation of an elastic plate with a notch under the action of a shock wave

The behavior of a thin elastic plate with a rectilinear notch under the action a weak shock wave in air is studied experimentally. A technique is developed for this purpose. The effect of the notch on the strain state of the plate is analyzed __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 11, pp. 99–104, November 2007.     

电磁热效应裂纹止裂的实验研究

通过本文给出的实验表明：利用电磁场的热效应对载流导体中的裂纹进行止裂是一种行之有效的方法。在电磁场作用瞬间,由于裂尖处的热集中效应,能够使其在附近一定范围内熔化形成微小焊口。由此,裂纹前缘处的曲率半径增加了2-3个数量级。同时,细化了裂纹前缘的显微组织,提高了材料的韧性,显著地减少了应力集中,阻止了干线裂纹源的形成,可有效地遏制了裂纹的扩展。文中介绍了实验原理、方法和结果;讨论了一些参数之间的关系。     

IUPAC-LDPE的流变性测试实验之间的相对滑动

以IUPAC—LDPE熔体在150℃下详细的流变学表征实验和毛细管挤出实验为基础考察了该熔体在挤出实验中的滑动问题．根据相对滑动特性给出了判断相对滑动存在和计算相对滑动速度的方法．用Wagner模型，PSM模型和Osaki模型计算的表观剪切速率，在10s^-1时的毛细管壁面剪切应力比毛细管挤出实验给出的应力值高出约15％-17％，这个结果意味着IUPAC—LDPE熔体在挤出实验中存在滑动现象．在表观剪切速率为0．1，1．0和10s^-1时，挤出实验条件下的流动与根据在旋转流变仪上测定的流变特性用PSM模型计算的流动相比，它们之间存在的相对滑动速度分别为0．004，0．071和1．343mm／s．用Wagner模型和Osaki模型计算的相对滑动速度与PSM模型的结果相近．     

功能铁磁材料的变形与断裂的研究进展

综述了近几十年, 特别是近十几年来铁磁材料的力磁耦合变形与断裂行为的研究概况. 传统铁磁弹性问题的研究已经有较长时间的积累, 文献中已有大量的研究结果发表. 近些年 来, 随着智能材料及结构应用与研究的兴起, 功能铁磁材料如稀土超磁致伸缩材料、铁磁相 变材料以及铁磁复合材料等的力学行为越来越受到重视, 人们在功能铁磁材料的变形与断裂 以及铁磁复合材料的有效性质等方面开展了大量的研究工作. 本文在简单介绍了经典铁磁弹 性和传统铁磁结构的力磁性能的研究背景基础上, 结合作者近年来在铁磁材料变形与断裂方 面所开展的工作, 着重评述了功能软铁磁材料在变形与断裂的实验研究,如实验设备和技术, 以及铁磁复合材料细观力学、软铁磁材料、铁磁功能材料的变形与断裂理论等方面的研究进 展, 并指出了需要进一步研究的方向.