排序方式: 共有106条查询结果,搜索用时 22 毫秒
51.
52.
稀土材料的红外和可见量子剪裁对于寻找更好能量效率的发光材料来说都是一个激动人心的发展。发光效率的最大上限值能从100%提高到200%甚至更高。在第一代晶硅太阳能电池与第二代薄膜太阳能电池之后第三代的聚光太阳能电池已成为目前的重点发展方向。现在,利用稀土材料的近红外量子剪裁发光效应有可能较好的解决太阳光谱与太阳能电池光电响应之间存在的光谱失配的问题,因此有可能较大幅度的提高太阳能电池的发电效率,因而具有重要的意义与价值。研究了钒酸钇晶体基质中Yb3+离子的近红外量子剪裁发光现象,测量了从可见到红外的钒酸钇晶体的发光谱、激发谱与荧光寿命,测量发现钒酸钇晶体基质能带在约322.0nm光激发时能导致有效的从钒酸钇晶体基质到Yb3+离子的二级合作能量传递,进而导致了很强的Yb3+离子的985.5nm2 F5/2→2 F7/2的近红外量子剪裁发光,同时,钒酸钇晶体基质的位于430.0nm的发光强度大幅降低。测量发现:(A)Yb(1.5)∶YVO4晶体的430.0nm的荧光寿命值为τA=3.785μs;(B)YVO4晶体的430.0nm的荧光寿命值为τB=22.72μs;研究计算发现总的理论量子剪裁效率上限值为η1.5%Yb=183.3%。 相似文献
53.
本文报道了在自动控制直径条件下大尺寸YVO4晶体的提拉法生长研究。利用改进的上称重法生长大尺寸YVO4晶体,在提拉法单晶生长过程中,晶体扩肩部分采用斜率积分模式,转肩部分采用斜率积分过渡到直径积分模式,等径部分采用直径积分模式,应用这种分段控制方式成功地实现了YVO4晶体的自动化生长。采用4台50型自动化生长炉对YVO4晶体自动化生长工艺进行了长达一年的可靠性验证,预设技术目标为晶体直径大于40 mm,等径部分长度大于30 mm,B级晶体质量达 80%以上,采用自动控制方法生长晶体毛坯共计138个,晶体直径达标率为99.3%,等径部分长度达标率为53.6%,晶体生长良品率为88.4%。本文还讨论了影响晶体等径部分长度达标率的若干工艺因素。 相似文献
54.
55.
CHEN Jinkai YANG Wenqin WU Meiqin 《Chinese Journal of Lasers》2001,10(5):387-394
1 Introduction ThestudyontheYVO4crystalcanbetracedbackto 1 970′s.Howeverduetoitspoorheatconductivity ,ithasnotbeenconsideredasagoodcandidateforflashlamp pumpedlasersystem .Lately ,thedevelopmentofLDlaserandnarrowbandLD pumpingtechnologyaimedattheabsorption p… 相似文献
56.
Stability regime study of a nonlinear mirror mode-locked laser 总被引:1,自引:0,他引:1
A diode array pumped nonlinear mirror mode-locked (ML) laser is developed and the regime of the stable operation for such a system is found to occur for a little detuning of intra-cavity second harmonic phase-matching. The existing theory of mode-locking using a fast saturable absorber (FSA) is used to derive corresponding equivalent parameters for a fast nonlinear mirror saturable absorber. The condition for stable single pulse ML operation is evaluated in terms of small signal gain of the laser medium and small signal nonlinear loss. The analysis explains the experimental observations and differentiates the regime of operation in ML, Q-switching and cw mode-locking. 相似文献
57.
G.V. Vzquez M.E. Snchez-Morales H. Mrquez J. Rickards R. Trejo-Luna 《Optics Communications》2004,240(4-6):351-355
This work reports, for the first time to our knowledge, the formation of planar waveguides in Nd:YVO4 by either carbon or proton implantation. The waveguides are characterised using the dark mode method and by spectroscopic studies, indicating that there is a reduction of the refractive index at the end of the ion track. Particularly, carbon implantation generates a considerable variation in the guiding region. It is shown that the waveguiding structure preserves the spectroscopic properties of the Nd3+ ions, thus maintaining the crystal quality. 相似文献
58.
59.
采用溶剂热法成功地制备出了YVO4∶Tm3+纳米荧光粉,并用X射线衍射仪(XRD)、透射电子显微镜(TEM)、紫外分析仪、紫外可见(UV-Vis)吸收光谱和光致发光(PL)光谱对YVO4∶Tm3+纳米荧光粉进行测试和表征。实验结果表明,YVO4∶Tm3+纳米荧光粉可发出明亮的蓝光,色纯度和发光强度都很高,而且具有良好的热稳定性。因此,YVO4∶Tm3+纳米荧光粉是一种十分适用于场发射显示器的荧光粉。 相似文献
60.