基于双色镜光谱合成9.6 kW合成光源

通过光纤激光光谱合成技术,可以打破单个光纤激光器输出功率受非线性因素制约的限制,实现更高功率的激光输出。通过梳理光谱合成技术的发展历程并分析其现状,对其原理及优劣势进行分析,结合自身研究,设计了一款便携式3路合成系统,通过设计及优化光纤激光器的放大结构,严格把控参与合束的子束光源的质量,将1 055、1 070和1 085 nm三路高功率窄线宽光纤激光进行合束,对合成系统中采用的双色镜进行研究,对其膜系指标进行严格的设计,对高陡度截止滤光膜的设计方法以及制备工艺进行分析,对其热损伤规律及控制技术进行研究,优化整个合成系统,最终实现合成功率9 650 W的高功率激光输出,合成效率92%,光束质量M2为1.7,并对未来双色镜光谱合成进行了展望。     

应用于单纵模光纤激光器的复合环腔滤波器的理论仿真

提出了一种用于单纵模激光器选模的基于光纤耦合器的光纤复合环腔（CRC）滤波器的仿真方法,利用该方法对两种新型双耦合器双环CRC(DCDR-CRC)滤波器及三耦合器双环CRC(TCDR-CRC)滤波器进行了理论仿真,通过引入游标原理,分析了两种滤波器在不同环长差下的滤波特性,并通过调整DCDR-CRC及TCDR-CRC的耦合比、环长及环长差,对有效自由光谱范围（FSR）、抑制比（SR）及主透射峰带宽进行优化,计算结果表明优化后环腔的有效FSR可有效抑制波长选择器传输通带内的增益竞争,较低的SR可以抑制CRC滤波器相邻透射峰之间的增益竞争,较窄的主透射峰可以保证仅有一个激光器的纵模被选择。     

带套筒构件埋地燃气管道绝缘接头的密封性研究

本文对直径为100mm带套筒构件埋地燃气管道绝缘接头的强度进行了计算和实验分析研究.计算研究中根据在符合实际工程下确定带套筒构件埋地燃气管道绝缘接头密封部位的应力和位移,以及对管道密封性能的影响;实验研究中根据对直径为100mm带套筒构件埋地燃气管道绝缘接头进行符合实际工况的试验,测量绝缘接头密封部位的应力和位移,以及密封圈的受损程度.对计算和实验结果进行分析比较,确定带套筒构件埋地燃气管道绝缘接头在装配中的最小预紧力,分析在不同因素作用下管道绝缘接头的安全性,并为其它直径类型带套管构件埋地燃气管道绝缘接头的设计提供可靠的依据.     

光纤传感器测量FRP加固结构的损伤

A distributed fiber optic sensor is developed for condition monitoring of civil infrastructure sys-tems. The fiber optic sensor is especially useful in applications involving structures strengthened by fiberreinforced polymer (FRP) composites. The sensor principles are simple and therefore, practical for detec-tion of cracks, debonding and deformation measurements. Structural monitoring capability of the sensor     

100 W全光纤声光调Q光纤激光器实验研究

 报道了一台全光纤结构主振荡功率放大(MOPA)型掺镱脉冲光纤激光器,以光纤光栅为腔镜,光纤型声光调Q的光纤激光器为种子源,通过两级掺镱双包层光纤放大器实现功率放大。对声光调Q的光纤激光器输出特性进行了研究,比较了不同泵浦波长、不同重复频率对激光输出功率和脉冲宽度的影响,并实现了最短脉冲宽度25 ns、单脉冲能量45 μJ的脉冲激光输出。在重复频率50 kHz时,对脉冲宽度130 ns、平均功率0.6 W的种子光进行放大,得到了平均功率102.5 W、脉冲宽度约240 ns的激光输出。     

120 W的二极管泵浦Nd:YAG绿光激光器

对激光二极管泵浦的NdYAG声光调Q腔内倍频固体激光器的折叠腔型进行了研究,当泵浦功率达800 W时,在V型腔上实现了脉宽为80 ns、重复频率为10 kHz、发散角为6 mrad、绿光功率为112 W的输出;在Z型腔上实现了脉宽为95 ns、重复频率为10 kHz、发散角为4 mrad、绿光功率为120 W的输出.比较两种腔型的实验结果可看出,Z型腔由于插入的光学元件较多,腔长较长,输出激光的脉宽较宽,但输出激光的光束质量有明显的提高.     

A theoretical and experimental study on all-normal-dispersion Yb-doped mode-locked fiber lasers

We report on a theoretical and experimental study of an all-normal-dispersion (ANDi) Yb-doped mode-locked fiber laser, in which nonlinear polarization rotation (NPR) is used to realize mode-locking without any dispersion compensation. Based on the coupled nonlinear Schrdinger (CNLS) equation, a model simulating the mode-locked process of an allnormal-dispersion ring fiber laser is developed, which shows that the achievement of stable mode-locking depends on the alignment of the polarization controller (PC) along the fast-polarization axis of the fiber, the birefringence intensity, and the net cavity dispersion. According to the theoretical analysis, stable mode-locked pulses with pulse duration 300 ps and average output power 33.9mW at repetition rate 36MHz are obtained.     

Two-Layer Feedback Neural Networks with Associative Memories

We construct a two-layer feedback neural network by a Monte Carlo based algorithm to store memories as fixed-point attractors or as limit-cycle attractors. Special attention is focused on comparing the dynamics of the network with limit-cycle attractors and with fixed-point attractors. It is found that the former has better retrieval property than the latter. Particularly, spurious memories may be suppressed completely when the memories are stored as a long-limit cycle. Potential application of limit-cycle-attractor networks is discussed briefly.     

Removing paint from a metal substrate using a flattened top laser

In this paper,we investigate laser cleaning using a flattened top laser to remove paint coating from a metal substrate.Under the irradiation of a flattened top laser,the coating paint of the metal substrate can be removed efficiently by laser induced ablation,stress,and displacement force.The temperature distribution,stress,and displacement are calculated in the coating layer and substrate using finite element analysis.The effects of a Gaussian laser and a flattened top laser and the results of different diameters of laser spot are compared.The investigation shows that the flattened top laser can reduce the substrate damage and enhance the cleaning efficiency.This method meets the need of large area industrial cleaning applications by optimizing the flattened top laser parameters.     

一种简单的大功率激光二级管阵列参量测试方法

本文详细介绍了一种测试大功率激光二极管阵列用金属光导管的设计原则及测试方法,它具有结构简单、操作方便、精度较高等一系列优点.文章最后还给出了通过这种方法测试大功率激光二极管阵列输出功率及发射光谱的一些实验结果.