Adsorption kinetics and dynamics of small organic molecules on a silica wafer: Butane, pentane, nonane, thiophene, and methanol adsorption on SiO2/Si(1 1 1)

The adsorption kinetics (by thermal desorption spectroscopy) and adsorption dynamics (by molecular beam scattering) have been determined for a number of alkanes, methanol, thiophene, and water on a silica wafer—SiO₂/Si(1 1 1). No indications for bond activation were present, i.e., all probe molecules adsorb molecularly obeying 1st order kinetics. The coverage-dependent heat of adsorption has been determined accordingly. The adsorption dynamics are precursor-mediated with Kisliuk-like shapes of the adsorption probabilities at low impact energies and adsorbate-assisted adsorption at large impact energies.     

乙酰丙酮吸光光度法测定白酒中甲醇含量

乙酰丙酮法测定白酒中甲醇是一种新的测试方法。白酒样品用高锰酸钾氧化后，加草酸除去过量的氧化剂，在pH3～4范围内，加入乙酰丙酮溶液，在沸水浴中显色，于418nm波长处测量其吸光度。方法步骤简单，具有较高的灵敏度和较高的重现性。     

Poly(4-vinylpyridine) catalyzed hydrolysis of methyl bromide to methanol and dimethyl ether

The hydrolysis of methyl bromide with neutral water is performed in the presence and absence of various amines in a batch reactor at different temperatures (50–125 °C). Screening of poly(4-vinylpyridine) as a potential reusable solid amine catalyst showed maximum efficiency. This significant enhancement in efficiency is due to the capture of HBr by solid PVP and remains phase-separated driving the reaction forward. The major advantage of this process is that the polymer can be easily regenerated and reused without loss of activity making it a very effective catalyst for the conversion of methyl halides to methanol and dimethyl ether.     

MEA with double-layered catalyst cathode to mitigate methanol crossover in DMFC

Methanol permeation is one of the key problems for direct methanol fuel cell (DMFC) applications. It is necessary to change the structure of the cathode of membrane electrode assembly (MEA). Therefore, a novel MEA with double-layered catalyst cathode was prepared in this paper. The double-layered catalyst consists of PtRu black as inner catalyst layer and Pt black as outer catalyst layer. The inner catalyst layer is prepared for oxidation of the methanol permeated from anode. The results indicate that this double-layered catalyst reduced the effects of methanol crossover and assimilated mixed potential losses. The performance of MEA with double-layered catalyst cathode was 52.2 mW cm⁻², which was a remarkable improvement compared with the performance of MEA with traditional cathode. The key factor responsible for the improved performance is the optimization of the electrode structure.     

Quantum chemical investigation of the adsorption of methanol on a cluster model of faujasite

The adsorption of methanol in zeolites of the faujasite type with sodium and calcium counter ions is studied with quantum chemical methods. The zeolite is represented with a cluster model allowing calculations at the Møller-Plesset as well as the DFT level of theory. An adsorption energy of −62.4 kJ/mol is calculated at the MP2/TZVP//BP86/TZVP level of theory for one methanol molecule at one site II sodium cation. Insight into the adsorption process is obtained with a three-body decomposition which reveals a strong destabilisation of the adsorption strength by large, positive three-body terms, which is important for force field development.     

利用原位红外光谱与微分电化学质谱联用技术研究在Pt以及PtRu电极上发生的甲醇氧化反应

利用电化学衰减全反射原位傅里叶变换红外光谱与微分电化学质谱联用技术,在流动电解池环境以及恒电位条件下研究了Pt电极和Pt电极通过表面电沉积Ru形成的PtRu电极(Pt_xRu_y)上发生的甲醇氧化反应(反应电解质溶液为0.1 mol/L HClO₄+0.5 mol/L MeOH). 在0.3～0.6 V(参比电极为可逆氢参比)实验用到的所有电极上,CO是唯一能从红外光谱观察到的与甲醇相关的表面吸附物;在Pt_0.56Ru_0.44电极上可以观察到CO吸附在Ru原子形成的岛上和CO线式吸附在Pt电极表面红外波段,而其他电极上只能观察到Pt表面上线式吸附的CO;甲醇氧化活性按Pt_0.73Ru_0.27>Pt_0.56Ru_0.44>Pt_0.83Ru_0.17>Pt的顺序递减;在0.5 V 时,甲醇在Pt_0.73Ru_0.27电极上的氧化反应的CO₂电流效率达到了50%.     

无表面活性剂Pt和PtRu纳米粒子制备及其甲醇氧化活性

利用一种简单的方法制备不含任何表面活性剂并具有高甲醇氧化活性的Pt和PtRu纳米电催化剂. 以CO为还原剂, CO和多壁碳纳米管(MWCNT_s)为保护剂和载体,通过一步反应得到沉积在多壁碳纳米管上Pt纳米粒子,在制备过程中无需使用任何有机溶剂或表面活性剂. 利用循环伏安法和计时电流法表征了所合成催化剂的甲醇氧化活性,甲醇氧化的峰电位(ca. 0.9 V vs. RHE)处的电流密度和比质量电流高达11.6 mA/cm² 和860 mA/mg_Pt. 在Pt/MWCNT_s表面电沉积Ru后,催化剂在低电位处的甲醇氧化活性得到提高,其在0.5和0.6 V的稳态比质量电流分别达到了20和80 mA/mg.     

Preheated solvent exposure on P3HT:PCBM thin film: A facile strategy to enhance performance in bulk heterojunction photovoltaic cells

In this study, we explored the ability of a preheated solvent (methanol) to induce characteristic changes at the organic active layer/metal interface, thereby improving the performance of fabricated organic photovoltaic (OPV) cells composed of poly(3-hexylthiopene) (P3HT) and a [6,6]-phenyl-C₇₁-butyric acid methyl ester (PCBM) photoactive blend. Our results demonstrate that exposure to methanol (at room temperature, or preheated at 45 °C or 65 °C) improves the performance of the fabricated OPV cells. After preheated methanol exposure, the P3HT:PCBM thin films were tested for crystallinity, morphology, mobility, and photovoltaic characteristics. Our results revealed that use of the preheated solvent on the organic active layer significantly influences the micro/nano scale morphology and phase segregation of the P3HT:PCBM thin films, as well as the charge carrier mobility. It is hypothesized that the side chain ordering of P3HT and redistribution of PCBM could be results of the modified active layer. Consequently, OPV cells modified with the methanol preheated at 65 °C exhibited a power conversion efficiency (PCE) of 3.36%, with open-circuit voltage of 0.59 V, short-circuit current density of 13.83 mA/cm², and fill-factor of 0.41. In contrast, the unmodified P3HT:PCBM thin film (without methanol exposure) showed a PCE of only 2.13%.     

在Al-P-Ti-Si-O催化剂上由甲醇和邻苯二酚合成愈创木酚的研究

采用非均匀沉淀法制备了Al1P1.30TiaSib(a=0-0.51,b=0-0.90）复合催化剂,研究了邻苯二酚与甲醇在该催化剂上的气相o-甲基化反应。结果表明,催化剂组成、相结构和表面性质对催化剂的活性和选择性有很大影响。其中Al1P1.30Ti0.30si0.17催化剂的愈创木酚收率最高,在反应温度为553K时,邻苯二酚转化率和愈创木酚收率分别为92%和86%。     

吡啶甲酸锂-铑(Ⅰ)配合物催化甲醇羰基化反应

本文采用吡啶甲酸或吡啶二甲酸锂盐为配体,与铑形成顺二羰基配合物,用于催化甲醇羰基化制乙酸。研究表明,与通常的铑配合物相比,该类双金属配合物无论在催化活性或乙酸生成的选择性方面均有明显的提高。