Oscillatory electrocatalytic oxidation of methanol on an Ni(OH)2 film electrode

A film of Ni(OH)₂ deposited cathodically on a roughened nickel substrate consists of even nanoparticles, which were characterized by atomic-force microscopy (AFM). The mechanism of potential oscillations in the electrocatalytic oxidation of methanol on this film electrode in alkaline medium was studied in situ by means of Raman spectroscopy in combination with electrochemical measurements. The redox change of the nickel hydroxide film, the concentration distribution of methanol in the diffusion layer, and the oxidation products of methanol were characterized in situ by time-resolved, spatial-resolved, and potential-dependent Raman spectroscopy, respectively. Electrochemical reactions, i.e. methanol oxidation and periodic oxygen evolution, coupling with alternately predominant diffusion and convection mass transfer of methanol, account for the potential oscillations that occur during oxidation of methanol above its limiting diffusion current. This mechanism is totally different from that of methanol oxidation on platinum electrodes, for which surface steps, i.e. formation and removal of CO_ad, are essential.This work is dedicated to Professor Gyorgy Horanyi on the occasion of his 70th birthday in recognition of his numerous contributions to field of electrochemical oscillations and electrocatalysis at Ni-hydroxide electrodes.     

Combustion and microexplosion of collision-merged methanol/alkane droplets

The combustion characteristics of freely falling droplets, individually generated by the merging of colliding methanol and alkane droplets, were investigated and compared with those for pure methanol and alkanes. The merging of the nominally immiscible methanol and alkanes was manifested in an apparently adhesive, but unmixed, manner in all test conditions. An air bubble was found to be trapped at the colliding interfaces where they were “adhered,” with the trapping favored for head-on or near head-on collision orientations. The trapped air bubble ostensibly induced heterogeneous nucleation of the methanol, being facilitated by the relatively low limit of superheat of methanol. Consequently, the droplet exploded almost immediately upon ignition, leading to an extremely short overall lifetime. For collision orientations that were more off-centered, bubble trapping and thereby heterogeneous nucleation were not favored. However, delayed, albeit strong, microexplosion occurred through homogeneous nucleation of methanol at the contacting interface. The global burning rate was therefore again augmented. In general, microexplosion was facilitated for high-boiling-point alkanes such as hexadecane and tetradecane. The co-vaporization of methanol and alkane from their respective hemispherical segments constituting the adhered droplet also led to flame colors that were more bluish than yellowish, indicating the reduction of soot from alkane burning in the presence of methanol vapor. In light of the difficulty of forming stable methanol/oil emulsions, the potential of separate injection of oil and methanol in opposed jet arrangement, in direct-injection engines to facilitate collision, is suggested.     

甲醇在不同形态ZrO2上吸附行为的FTIR研究

用FTIR技术考察了甲醇在不同形态氧化锆上的吸附和活化转化行为.甲醇吸附在无定型和四方氧化锆上生成线式和桥式甲氧基物种,而在单斜氧化锆上还出现锥桥式甲氧基物种.在单斜和无定性氧化锆上的桥式羟基活泼而四方氧化锆上的线式羟基活泼.氧化锆表面吸附的甲氧基物种在晶格氧的作用下进一步转化,在单斜和无定性氧化锆上生成甲酸盐,并且可以进一步氧化为碳酸盐物种;而在四方氧化锆表面,甲氧基物种可以直接氧化为碳酸盐物种,这表明四方氧化锆的晶格氧比其他两种氧化锆上的更为活泼.     

New FIR Laser Lines from CHD2OH Methanol

We have investigated CHD₂OH methanol as source of far-infrared (FIR) laser radiation using the optical pumping technique. Our new waveguide pulsed CO₂ laser, with peak powers as high as some kW, has allowed us to observe 12 new lines. Each of them is characterized in wavelength, relative polarization, intensity, optimum operating pressure and pump offset from the center of the exciting CO₂ line.     

激光溅射Ni等离子体与气相CH3OH团簇的反应

用激光溅射 分子束技术研究了气相中Ni的等离子体与甲醇分子团簇的反应 .观察到Ni+ (CH3 OH) n、NiO+ (CH3 OH) n、H+ (CH3 OH) n、H3 O+ (CH3 OH) n 四个种类的团簇正离子和CH3 O-(CH3 OH) n(n≤ 2 5 )一种团簇负离子 .详细考察了激光烧蚀等离子体作用于脉冲分子束的不同位置时 ,对团簇产物种类和团簇尺寸大小的影响 .发现NiO+ (CH3 OH) n 是由Ni+ (CH3 OH) n 团簇内的脱甲烷反应生成的 ,而H+ (CH3 OH) n、H3 O+ (CH3 OH) n主要是激光等离子体中的电子与甲醇团簇碰撞电离产生的     

Fourier transform spectroscopy of CH3OH: rotation-torsion-vibration structure for the CH3-rocking and OH-bending modes

High-resolution Fourier transform spectra of CH₃OH have been investigated in the infrared region from 930 to 1450 cm⁻¹ in order to map the torsion-rotation energy manifolds associated with the ν₇ in-plane CH₃ rock, the ν₁₁ out-of-plane CH₃ rock, and the ν₆ OH bend. Upper-state term values have been determined from the assigned spectral subbands, and have been fitted to power-series expansions to obtain substate origins and effective B-values for the three modes. The substate origins have been grouped into related families according to systematic trends observed in the torsion-vibration energy map, but there are substantial differences from the traditional torsional patterns. There appears to be significant torsion-mediated spectral mixing, and a variety of “forbidden” torsional combination subbands with |Δυ_t|>1 have been observed, where υ_t denotes the torsional quantum number (equivalent to υ₁₂). For example, coupling of the (υ₆,υ_t)=(1,0) OH bend to nearby torsionally excited (υ₇,υ_t)=(1,1) CH₃-rock and (υ₈,υ_t)=(1,1) CO-stretch states introduces (υ₆,υ_t)=(1,0)←(0,1) subbands into the spectrum and makes the ν₇+ν₁₂−ν₁₂ torsional hot band stronger than the ν₇ fundamental. The results suggest a picture of strong coupling among the OH-bending, CH₃-rocking, and CO-stretching modes that significantly modifies the traditional energy structure and raises interesting and provocative questions about the torsion-vibration identity of a number of the observed states.     

Molecular and crystal structure of Cp2Mo(mto), mto=monothiooxalate

Compoundl, Cp₂Mo(mto) is obtained by the reaction of Cp₂MoCl₂ with methanol solutions of potassium dithiooxalate in air. Red platelike crystals of Cp₂Mo(mto) were grown by the slow diffusion of pentane into a CH₂Cl₂ solution ofl and have been studied by X-ray crystallography: space group, P2₁/n,a=7.578(1),b=10.551(2),c=14.090(3) Å, =94.38(2)°,V=1123.1(4) ų,Z=4. The mto ligand chelates to the Mo atom through one oxygen atom and the sulfur atom. The two Cp rings form dihedral angles of 24° with the least-squares plane of the mto ligand. The Mo–O and Mo–S bond distances are 2.193(5) and 2.449(2) Å, respectively.     

Electrochemically Co‐deposited Teeth‐like Virus‐Platinum Nanohybrids as an Electrocatalyst for Methanol Oxidation Reaction

M13 virus (M13) as scaffolds has a major appeal, owing to their mono‐dispersed, fibrillar morphology and engineerable surface reactive sites. Herein we had developed a facile electrocatalyst for energy application. Platinum nanostructures are directly co‐deposited from a wild‐type M13 (or) two different engineered M13 mixed electrolytes onto the ITO electrodes. The engineered M13 with 4E peptides could specifically nucleate Pt precursor thereby enables the efficient growth of teeth‐like structures at the ITO electrode. The electrocatalytic activity of the resulting electrocatalyst toward methanol oxidation in alkaline medium was investigated and found enhanced mass activity (0.321 A/mg_Pt) relative to the catalyst prepared from wild‐type M13, Y3E peptides engineered M13 and without M13. Our novel electrocatalyst fabrication can be extended to other metal and metal oxides and its application might be useful to develop novel clean and green energy generating and storage materials.     

Production of hydrogen by oxidative steam reforming of methanol over Cu/SiO2 catalysts

Selective production of hydrogen by oxidative steam reforming of methanol (OSRM) was studied over Cu/SiO₂ catalyst using fixed bed flow reactor. Textural and structural properties of the catalyst were analyzed by various instrumental methods. TPR analysis illustrates that the reduction temperature peak was observed between 510?K and 532?K at various copper loadings and calcination temperatures and the peaks shifted to higher temperature with increasing copper loading and calcination temperature. The XRD and XPS analysis demonstrates that the copper existed in different oxidation states at different conditions: Cu₂O, Cu⁰, CuO and Cu(OH)₂ in uncalcined sample; CuO in calcined sample: Cu₂O and metallic Cu after reduction at 600?K and Cu⁰ and CuO after catalytic test. TEM analysis reveals that at various copper loadings, the copper particle size is in the range between 3.0?nm and 3.8?nm. The Cu particle size after catalytic test increased from 3.6 to 4.8?nm, which is due to the formation of oxides of copper as evidenced from XRD and XPS analysis. The catalytic performance at various Cu loadings shows that with increasing Cu loading from 4.7 to 17.3?wt%, the activity increases and thereafter it decreases. Effect of calcination shows that the sample calcined at 673?K exhibited high activity. The O₂/CH₃OH and H₂O/CH₃OH molar ratios play important role in reaction rate and product distribution. The optimum molar ratios of O₂/CH₃OH and H₂O/CH₃OH are 0.25 and 0.1, respectively. When the reaction temperature varied from 473 to 548?K, the methanol conversion and H₂ production rate are in the range of 21.9–97.5% and 1.2–300.9?mmol?kg^?1?s^?1, respectively. The CO selectivity is negligible at these temperatures. Under the optimum conditions (17.3?wt%, Cu/SiO₂; calcination temperature 673?K; 0.25 O₂/CH₃OH molar ratio, 0.5 H₂O/CH₃OH molar ratio and reaction temperature 548?K), the maximum hydrogen yield obtained was 2.45?mol of hydrogen per mole of methanol. The time on stream stability test showed that the Cu/SiO₂ catalyst is quite stable for 48?h.