Tactile impression and friction of water on human skin

Water has a unique touch as well as characteristic physical properties. However, nobody knows the real identity of its touch. Here, we show that water creates a stick-slip feel when a small amount is rubbed using fingertip on an artificial skin that mimics the structure of human skin. The results of frictional analyses predict that this stick-slip feel is caused by a drastic change in frictional resistance. The present result is valuable for biologists and robot engineers as well as cognitive scientists and tribologists, because it is a new example of stick-slip phenomena on biological surfaces. The tactile texture of this most familiar material could also be applied to consumer products or virtual reality systems.     

On The Maximum Friction Law for Rigid/Plastic,Hardening Materials

For a rigid/plastic, hardening material model, it is shown that the velocity fields adjacent to surfaces of maximum friction must satisfy the sticking condition. This means that the stress boundary condition, the maximum friction law, may be replaced by the velocity boundary condition. Axisymmetric flows without rotation and planar flows are considered.     

Numerical simulation of storm surges in Bangladesh using a multi-level model

A comparative study with a vertically integrated model and the multi-level model has shown that the former can remain a good substitute for the latter in the prediction of sea-surface elevation as long as the bottom friction coefficients in the vertically integrated models are properly specified.     

The thermoelastic Aldo contact model with frictional heating

In the study of the essential features of thermoelastic contact, Comninou and Dundurs (J. Therm. Stresses 3 (1980) 427) devised a simplified model, the so-called “Aldo model”, where the full 3D body is replaced by a large number of thin rods normal to the interface and insulated between each other, and the system was further reduced to 2 rods by Barber's Conjecture (ASME J. Appl. Mech. 48 (1981) 555). They studied in particular the case of heat flux at the interface driven by temperature differences of the bodies, and opposed by a contact resistance, finding possible multiple and history dependent solutions, depending on the imposed temperature differences.The Aldo model is here extended to include the presence of frictional heating. It is found that the number of solutions of the problem is still always odd, and Barber's graphical construction and the stability analysis of the previous case with no frictional heating can be extended. For any given imposed temperature difference, a critical speed is found for which the uniform pressure solution becomes non-unique and/or unstable. For one direction of the temperature difference, the uniform pressure solution is non-unique before it becomes unstable. When multiple solutions occur, outermost solutions (those involving only one rod in contact) are always stable.A full numerical analysis has been performed to explore the transient behaviour of the system, in the case of two rods of different size. In the general case of N rods, Barber's conjecture is shown to hold since there can only be two stable states for all the rods, and the reduction to two rods is always possible, a posteriori.     

Slip-line modeling of machining with a rounded-edge tool—Part I: new model and theory

The effect of tool edge roundness attracts growing attention from the international machining research community due to ever accelerating applications of precision, super-precision, micro-, and nano-machining technologies in a wide variety of modern industries. A new slip-line model for machining with a rounded-edge tool and its associated hodograph are proposed in this paper. The model consists of 27 slip-line sub-regions, each sub-region having its own physical meaning. It is demonstrated that the model simultaneously takes into account nine effects, such as the shear-zone effect and the size effect, which commonly occur in machining. Eight groups of machining parameters, such as the ploughing (parasitic or non-cutting) force and the chip up-curl radius, can be simultaneously predicted from the model. Furthermore, the model incorporates eight slip-line models previously developed for machining during the last six decades as special cases. An additional special case that involves a parallel-sided shear zone can also be derived from the new model. A mathematical formulation of the model is established based on Dewhurst and Collins's (1973) matrix technique for numerically solving slip-line problems. A purely analytical equation is proposed to predict the thickness of the primary shear zone. This equation is also employed to predict the shear strain-rate in the primary shear zone.     

Reibung, Selbsthemmung, Selbsterregung: Überlegungen zum Painlevéschen Paradoxon

Equations of motion of certain rigid body mechanisms which contain Coulomb friction may fail for particular parameter regions, Painlevé's paradoxical results emerge. When small deformations are permitted, a set of singularly perturbed algebro-differential equations governs the motions. The number characteristic for the paradox discriminates between decaying small high-frequency oscillations and oscillations which possibly grow. In order to decide about stability in the second case, it is necessary to smoothen the frictional characteristic and to study the coupled high-frequency oscillations of the complete system. The paper outlines the individual steps of such an investigation for a simple example.     

Experimental and numerical investigations of pressure drop in a rectangular duct with modified power law fluids

Numerical solutions are presented for fully developed laminar flow for a modified power law fluid (MPL) in a rectangular duct. The solutions are applicable to pseudoplastic fluids over a wide shear rate range from Newtonian behavior at low shear rates, through a transition region, to power law behavior at higher shear rates. The analysis identified a dimensionless shear rate parameter which, for a given set of operating conditions, specifies where in the shear rate range a particular system is operating, i.e. in the Newtonian, transition, or power law regions. The numerical results of the friction factor times Reynolds number for the Newtonian and power law region are compared with previously published results showing agreement within 0.05% in the Newtonian region, and 0.9% and 5.1% in the power law region. Rheological flow curves were measured for three CMC-7H4 solutions and were found to be well represented by the MPL constitutive equation. The friction factor times Reynolds number values were measured in the transition region for which previous measurements were unavailable. Good agreement was found between experiment and calculation thus confirming the validity of the analysis.     

Front roughening in three-dimensional imbibition

We investigate the structure and dynamics of the interface between two immiscible liquids in a three-dimensional disordered porous medium. We apply a phase-field model that includes explicitly disorder and discuss both spontaneous and forced imbibition. The structure of the interface is dominated by a length scale ξ_× which arises from liquid conservation. We further show that disorder in the capillary and permeability act on different length scales and give rise to different scalings and structures of the interface properties. We conclude with a range of applications.     

Fluorination of diamond — C4F9I and CF3I photochemistry on diamond (100)

The radiation-induced decomposition of C₄F₉I and CF₃I overlayers at 119 K on diamond (100) surfaces has been shown to be an efficient route to fluorination of the diamond surface. X-ray photoelectron spectroscopy has been used for photoactivation as well as for studying the photodecomposition of the fluoroalkyl iodide molecules, the attachment of the photofragments to the diamond surface, and the thermal decomposition of the fluoroalkyl ligands. Measured chemical shifts agree well with ab initio calculations of both C 1s and F 1s binding energies. It is found that chemisorbed CF₃ groups on diamond (100) decompose by 300 K whereas C₄F₉ groups decompose over the range 300 to 700 K and this reactivity difference is rationalized on steric grounds. Both of these thermal decomposition processes produce surface C---F bonds on the diamond. The surface C---F species thermally decompose over a wide temperature range extending up to 1500 K. Hydrogen passivation of the diamond surface is ineffective in preventing free radical attack from the photodissociated products of the fluoroalkyl iodides; I atoms produced photolytically abstract H from surface C---H bonds to yield hydrogen iodide at 119 K allowing diamond fluorination. The attachment of chemisorbed F species to the diamond (100) surface causes band bending as the surface states are occupied as a result of chemisorption. This results in a shift to higher binding energy of the diamond-related C 1s levels present in the surface and subsurface regions which are sampled by XPS on the diamond. The use of photoactivation of fluoroalkyl iodides for the fluorination of diamond surfaces provides a convenient route compared to other methods involving the action of atomic F, molecular F₂, XeF₂ and F-containing plasmas.     

Accurate Turbine Inertia Measurement

High fidelity power measurements in free wheel devices require accurate inertia measurements. To evaluate the turbine efficiency, a new experimental technique to measure the momentum of inertia has been developed at the von Karman Institute (VKI). This experimental methodology allows the determination of the inertia of complex shape bodies without being dismounted from their rotating housing.