A SIMPLIFIED CALCULATING METHOD OF NONLINEAR FREQUENCY OF CABLE NET UNDER MEAN WIND LOAD

The cable net supported glass curtain wallas the most advanced technique in dot point supported glass curtain wall, is widely used in China. Because of its large deflection and high nonlinearity under wind load, the dynamic performance of the cable net is greatly different from that of the conventional linear structures. The continuous membrane theory is used to construct the nonlinear vibration differential equation of the cable net, and the harmonic balance method is used to solve the analytic formula of the nonlinear frequency. In order to verify the accuracy of the above analytic formula, the results of the formula and the nonlinear FEM time-history method are compared and found to be in good agreement. Furthermore, the nonlinear vibration differential equation and the nonlinear frequency obtained in this paper are the basis for the wind-induced response analysis of a cable net under fluctuating wind load.     

FREE VIBRATION OF ANISOTROPIC RECTANGULAR PLATES BY GENERAL ANALYTICAL METHOD

According to the differential equation for transverse displacement function of anisotropic rectangular thin plates in free vibration, a general analytical solution is established. This general solution, composed of the composite solutions of trigonometric function and hyperbolic function, can satisfy the problem of arbitrary boundary conditions along four edges. The algebraic polynomial with double sine series solutions can also satisfy the problem of boundary conditions at four corners. Consequently, this general solution can be used to solve the vibration problem of anisotropic rectangular plates with arbitrary boundaries accurately. The integral constants can be determined by boundary conditions of four edges and four corners. Each natural frequency and vibration mode can be solved by the determinate of coefficient matrix from the homogeneous linear algebraic equations equal to zero. For example, a composite symmetric angle ply laminated plate with four edges clamped has been calculated and discussed.     

具有弹性支座杆件的动力稳定性研究

研究了杆件具有弹性支座时直杆的动力稳定性问题，推导出了杆件的临界频率和动力不稳定边界，分析了弹簧刚度和阻尼对杆件动力稳定性的影响，研究表明杆件的侧向刚度愈大其结构的动力稳定性愈好，阻尼对杆的振动起有利作用，并提出了在实际工程中减小杆件振动的一些措施．     

双层旋转壳流固耦合振动有限元分析

本文采用旋转壳体元和流体元分析了双层旋转壳体流固耦合振动特性,基于Novozhilov壳体理论、水弹性理论以及Hamilton变分原理推导出耦合系统运动方程,计算结果与实测值比较表明本分析方法有较好的精度。     

NONLINEAR VIBRATION OF CIRCULAR SANDWICH PLATES UNDER CIRCUMJACENT LOAD

Based on von Karman plate theory, the issue about nonlinear vibration for circular sandwich plates under circumjacent load with the loosely clamped boundary condition was researched. Nonlinear differential eigenvalue equations and boundary conditions of the problem were formulated by variational method and then their exact static solution can be got. The solution was derived by modified iteration method, so the analytic relations between amplitude and nonlinear oscillating frequency for circular sandwich plates were obtained. When circumjacent load makes the lowest natural frequency zero, critical load is obtained.     

Regimes of vortex shedding from an in-line oscillating circular cylinder in the uniform flow

A finite volume method for the time dependent viscous incompressible flow around an in-line oscillating circular cylinder at Reynolds number of 200, 855 is presented in this paper. The Navier-Stokes equations in a finite volume form are solved with a moving grid system, based on a time dependent coordinate transformation. To investigate the vortex-shedding characteristics behind the circular cylinder and the effects of Reynolds number and other non-dimensional parameters such as reduced amplitude and reduced frequency， several numerical schemes have been tested with different amplitude and frequency close to Sto and a harmonic at each Reynolds number. Present numerical results indicate several types of vortex shedding mode which is known mainly depending on the reduced frequency and also the reduced amplitude, which is called synchronization or lock-on.     

斜拉索模态试验参数研究

试验模态分析是斜拉桥索力测试中广泛应用的方法。该方法的关键之一是采取合理的试验方案获取可靠的响应信号以识别出正确的索振动频率。本文通过试验,详细讨论了斜拉索模态测试中若干试验参数,如激振类型、激振位置、传感器位置以及频率分辨率对试验结果的影响;比较环境激励与锤击激励的效果,验证了环境激励的方法也可以准确识别索的频率;最后给出了较为合理的斜拉索模态试验方案,用该方案确定的索力与理论计算结果相差不超过 1. 5%。     

混合层强化混合的数值研究

受 Ｗａｎｇ ＆ Ｆｉｅｄｌｅｒ（１９９７）的实验的启发，采用高阶精度的差分格式，通过数值模拟的方法，研究了二维混合层及限于两平板间的二维混合层（二维受限混合层）入口处加振动对提高混合层混合效率的作用．计算结果表明：对二维混合层，振动的频率越低，在混合层中产生的大尺度涡结构的尺度越大，在频率很低时，涡具有相似性；对限于两平板间的二维混合层，在一定的振动频率下，混合层中产生的涡较大而且破碎得也较好，这将有利于混合．这一结论与 Ｗａｎｇ ＆ Ｆｉｅｄｌｅｒ（１９９７）的实验观测到的结果是一致的．     

大跨度斜拉桥动力特性分析

本文提出一种计算大距度钢桁梁斜拉桥动力特性的方法。文中分别采用桁段有限单元、空间梁元、空间杆元计算斜拉桥中桁架，桥塔、拉索的刚度矩阵与质量矩阵，采用子空间迭代法求解特征方程，所得结果可供设计参考。     

作大范围运动弹性梁刚—柔耦合动力学建模

利用弹性梁的变形理论和 Hamilton力学原理对作大范围运动弹性梁的刚 -柔耦合动力学建模理论进行了研究。分析了大范围运动对弹性梁的横向振动和纵向振动的影响 ,得到了大范围运动与弹性梁的中线耦合变形之间的耦合作用对该系统动力学性质有显著的影响 ,从而提出了作大范围运动弹性梁的刚柔耦合动力学模型