让数学“学讲课堂”不失“数学味”——函数的教学设计及反思

函数的概念是初中数学的重要概念,也是学生难以理解的一个概念.本教学设计是让学生在充分的实例感知的基础上,体会函数概念产生的必要性,通过自主学习和微课感知函数模型的构建过程.这节课是苏科版八上6.1函数的第一课时,它是笔者到邵店中学用"学讲方式"上的一节公开课.     

碳辅助金属配合物热解法制备高含量Fe-N4单原子催化剂用于氧还原反应

单原子催化剂凭借其超高的原子利用率及在某些反应中表现出的出色催化效果,被认为是最有前途的电催化剂之一,引起了研究人员的极大热情和兴趣.制备高金属含量的单原子催化剂是基础研究和实际应用的前提和关键.然而,由于原子表面自由能随着尺寸的减小而急剧增加,在制备和催化过程中,单原子催化剂的金属原子很容易聚集成团簇甚至颗粒,因此如何制备高负载量的单原子催化剂仍然是一个不小的挑战.在众多单原子催化剂中,非贵金属中铁基单原子被认为是燃料电池中的Pt催化剂的有效替代品.在燃料电池的核心反应–电化学氧还原反应中,Fe-N_x被证明是铁单原子催化剂中的主要活性中心.因此,为了获得更好的氧还原性能,提高铁单原子催化剂中Fe-N_x的含量就显得非常关键.前期已报道了一些关于制备高Fe含量的铁单原子催化剂材料的策略,例如空间限域策略和配位合成策略.其中卟啉和葡萄糖作为配位剂,双氰胺和三聚氰胺可热解成氮掺杂碳材料以捕获金属原子,形成M-N_x.同时,具有高比表面积的富氧碳载体可以通过掺杂氮来作为固定金属原子的位点.我们开发了一种简单直接的方法,通过碳辅助金属配合物热解法制备高金属含量的Fe-N4单原子催化剂,即在最佳碳化温度800℃、三聚氰胺存在下对氮掺杂多孔碳辅助分散铁邻苯二胺配合物进行热解.在该方法中,氮掺杂多孔碳是一种具有丰富氮缺陷,高表面积(1267 m²?g^–1)和良好分散性的多孔生物质碳材料.邻苯二胺作为含两个氨基的二齿配体,可以很容易地与过渡金属配位,形成稳定的平面四配位络合物.此外,由于在高温条件下过渡金属的催化作用,邻苯二胺也被用作氮掺杂碳的前体.因此,氮掺杂多孔碳和邻苯二胺是合成高金属含量铁单原子催化剂的关键前驱体.通过X射线光电子能谱,大角度环形暗场扫描透射电子显微镜和X射线吸收精细结构光谱表征,发现所制备的铁单原子催化剂中铁原子以单个原子的形式锚固在碳载体上,并与碳基质的四个掺杂氮原子配位,得到Fe-N₄的构型.通过调节Fe前驱体量,铁单原子催化剂中Fe的最高负载量达到7.5 wt%,在目前已经报道的铁单原子催化剂中排第四.电化学氧还原测试表明,在0.10 M KOH溶液中,随着铁含量的增加,铁单原子催化剂的氧还原性能逐渐提高.其中250Fe-SA/NPC-800样品表现出最高起始电位0.97 V和最正的半波电位0.85 V,可与市售的40%Pt/C催化剂相媲美.和已报道的铁单原子催化剂相比,由于我们制得的催化剂的比表面积较低,只有247 m²?g^–1,所以制约了催化剂的性能.在混合动力学势域中,根据Koutecky-Levich方程计算得出的电子转移数约为3.6,表明250Fe-SA/NPC-800主要催化四电子转移过程,这可以归因于以Fe-N₄活性中心降低了四电子过程中关键中间体的形成能垒及过程的自由能变化.此外,250Fe-SA/NPC-800展现了较高的电化学稳定性.连续工作6 h后,250Fe-SA/NPC-800保留了超过87%的电流密度,而Pt/C表现出明显的衰减,仅保留了49%.     

核心素养下开展变式教学的实践与思考

通过生活实例归纳基本事实,体会数学与现实世界的联系;让学生根据基本事实给直线、射线、线段命名,发展合情推理能力;借助课本习题,通过改变点的个数构建变式问题系列,渗透分类讨论的数学思想,培养学生的质疑、反思意识和提出问题、发现问题的能力,落实“四基四能”;在实际问题抽象、转化为数学问题的过程中,发展学生的数学抽象、数学建模等核心素养.     

深度挖掘教材素材 创新整合原创命题

教材是课堂教学的主要载体,也是命题的良好素材.深度挖掘教材素材,创新整合,合理拓展,使之成为具有评价意义的试题,更好地评价教师的教与学生的学,也能促进教师对教材例题、习题的研究与深挖,具有重要的促进作用.近期笔者命制了一道几何压轴题,从三道教材原题入手,将其整合、创新,推广延伸,本文介绍命题过程及心得体会.     

带有相依重尾冲击的Poisson噪音过程尾的一致渐近性质

本文考虑了带有某种相依重尾冲击的Poisson噪音过程尾的一致渐近性质.当冲击是二元上尾渐近独立的非负随机变量具有长尾和控制变化尾分布且噪音函数具有正的上下界时,得到了过程尾概率的一致渐近公式.进而,当冲击具有连续的一致变化尾分布时,去除了噪音函数具有正的下界的限制.对于噪音函数不一定具有正的上界的情形,当冲击具有两两负象限相依结构时,也得到了一致渐近性结果.     

He+等离子体辐照下钨丝表面He通量分布的数值模拟

在He等离子体辐照条件下,钨纳米丝的形成对材料的抗辐照性能及钨丝间隙内He的分布产生显著影响。根据钨丝层中He离子的碰撞过程,建立了He⁺辐照下钨纳米丝表面He通量分布的模型。研究表明钨丝表面He通量随着深度的增大而减小,在深度3.3μm处,钨丝表面He通量是表层的百分之一。钨丝表面He通量随着注入离子通量的增加呈线性增长,但是与注入离子的能量几乎无关。钨丝层厚度越大,钨丝表面He通量越小;随着钨丝半径的增大,钨丝表层的He通量会明显增大。     

原子系统中偶极-偶极相互作用对量子存储支撑熵不确定度的调控研究

本文研究了Markovian过程和non-Markovian过程两种情况下,原子系统中偶极-偶极(D-D)相互作用和失谐量对两原子系统量子存储支撑(QMA)熵不确定度的调控作用.与Markovian过程相比,在non-Markovian过程中,由于库环境的记忆效应使得具有D-D相互作用的两原子系统QMA熵不确定度的演化行为呈现出振荡上升现象,且熵不确定度的上升趋势得到减缓,从而抑制了由系统量子噪声引起的退相干效应.此外,D-D相互作用对两原子系统QMA熵不确定度具有显著的调控能力,且D-D相互作用比失谐量的调控能力更强.     

CH4裂解制备C2H2过程气体空芯光纤增强拉曼光谱检测研究

基于空芯反谐振光纤设计搭建了光纤增强拉曼光谱检测平台,实现了95%的激光耦合效率;提出CCD和小孔协同降噪方法,使信噪比提高约6倍;相比于未使用光纤时,信噪比提高约270倍。基于单一标准浓度气体分析,确定了用于气体定性的特征拉曼谱峰及标定模型并建立了过程气体定量分析模型,实现了CH₄裂解制备C₂H₂过程气体现场样本的同时检测分析,主要成分包含H₂、CO、CO₂、CH₄、C₂H₂、C₂H₆和C₂H₄。各气体同时最小检出限分别达到6.3、26.6、1.2、2.2、4.2、3.9、9.1μL/L·bar,各气体含量分别为560 588.51μL/L、230 678.21μL/L、33 107.65μL/L、56 086.77μL/L、77 945.56μL/L、1 307.19μL/L、1 823.55μL/L,各气体浓度与色谱仪标...     

基于混酸回流制备碳点的中和过程

Carbon dots (C dots) are relatively novel carbon nanomaterials that have attracted significant interest due to their unique photoluminescence, good biocompatibility, and stability. The preparation methods of C dots was usually summarized into "top-down" and "bottom-up", and mixed acid reflux is a top-down strategy that can be used to synthesize C dots, during which neutralization is a necessary step that can significantly influence the properties and potential applications of the final product. Previously, this research area mainly focused on tuning the properties of C dots by changing the starting materials and/or varying the reaction conditions; the influence of the reagents used during neutralization has been largely ignored. As the previously reported C dots prepared by mixed acid reflux were obtained from different starting materials under varied conditions, a meaningful comparison is difficult. Herein, yellow-emitting C dots were prepared by mixed acid-refluxing a carbon-rich material derived from fullerene carbon soot. For the same batch of as-prepared C dots, the influences of four reagents, i.e., NaOH, Na₂CO₃, K₂CO₃, and NH₃·H₂O, during neutralization on the structures and photoluminescence of the resulting C dots were investigated in detail. The results of thermogravimetric analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy clearly showed that the reagent used during neutralization can affect the degree of dissociation of the acidic functional groups on the C dots. This is further supported by examination of the C dot/surfactant mixtures where subtle changes in the phase behavior were observed. Structural changes of the C dots cause variations in their surface states, ultimately altering the optical characteristics, including UV-vis absorption and fluorescence. Among the treated C dots, the sample prepared with Na₂CO₃ showed the strongest emission under the same excitation wavelength, while that prepared with NH₃·H₂O exhibited a distinct red shift (~8 nm) in the emission curve. The results presented herein provide clear evidence that neutralization reagent selection is important for optimizing the properties of the resulting C dots obtained by mixed acid reflux. In addition, the photoluminescence of the C dots can be influenced by their counterions, providing a novel method for tuning the properties of C dots while explaining their behavior in saline solutions. In short, the basicity of the neutralizing reagent and the type of counterions affect the structure of the C dots surface, which brings different performances. This work reminds researchers that it is necessary to use the type of neutralizing reagent as an experimental condition when preparing C dots in the future.     

MULTIPLE SCATTERING AND DYNAMIC STRESS ANALYSIS OF ELASTIC WAVES IN A FIBER—REINFORCED COMPOSITE WITH INTERFACES

Based on the theory of elastic dynamics, multiple scattering of elastic waves and dynamic stress concentrations in fiber-reinforced composite are studied. The analytical expressions of elastic waves in different regions are presented. The mode coefficients of elastic waves are determined in accordance with the continuous conditions of displacement and stress on the boundary of the multi-interfaces. By using the addition theorem of Hankel functions, the formula of scattered wave fields in different local coordinates are transformed into those in one local coordinate to determine the unknown coefficients and dynamic stress concentration factors (DSCFs). The influences of the distance between two inclusions, material properties and structural size on the DSCFs near the interfaces are analyzed. As examples, the numerical results of DSCFs near the interfaces for two kinds of fiber-reinforced composites are presented and discussed. The project supported by the National Natural Science Foundation of China (19972018)