陶瓷基功能材料载体纤维增强效果及机理

以陶瓷基功能材料载体为研究对象,按照其生产工艺配方,研究了纤维种类(莫来石、氧化铝、氧化锆)及其添加量对陶瓷基功能材料载体性能的影响.在相同实验条件且不影响其功能化参数前提下,将其与未添加纤维的空白试样力学性能进行对比.结果表明,试样经1200℃烧成后,相比莫来石与氧化铝纤维增强的陶瓷基功能材料载体,氧化锆纤维的增强效果最好.当氧化锆纤维的添加量为0.8 wt;时,试样的吸水率和气孔率均较低,分别为2.0;、4.0;,相比空白对比试样抗折强度增强了42.4;.     

硫化镉反蛋白石光子晶体制备及光解水制氢

对硫化镉反蛋白石结构光子晶体薄膜进行了可控合成,用巯基乙酸修饰的纳米晶和P(St-MMA-SPMAP)高分子小球共组装,成功地构筑了反蛋白石结构并用于可见光光解水产氢。结果表明,在可见光(λ≥420 nm)照射下,Cd S-310反蛋白石结构薄膜的光解水产氢性能比硫化镉纳米颗粒提高了一倍。这主要是因为等级孔结构反蛋白石光子晶体特性对催化剂的光催化性能的提升:首先,反蛋白石的周期性结构增加了光子在材料中的传播,提高了催化剂对太阳光的利用率;同时,大孔孔壁是由纳米颗粒堆积而成的,在反应中提供了更多的反应活性位点;此外,孔结构有利于物质的传输和分子的吸附。     

基于NiCo2O4纳米片电极的非对称混合电容器

The looming global energy crisis and ever-increasing energy demands have catalyzed the development of renewable energy storage systems. In this regard, supercapacitors (SCs) have attracted widespread attention because of their advantageous attributes such as high power density, excellent cycle stability, and environmental friendliness. However, SCs exhibit low energy density and it is important to optimize electrode materials to improve the overall performance of these devices. Among the various electrode materials available, spinel nickel cobaltate (NiCo₂O₄) is particularly interesting because of its excellent theoretical capacitance. Based on the understanding that the performances of the electrode materials strongly depend on their morphologies and structures, in this study, we successfully synthesized NiCo₂O₄ nanosheets on Ni foam via a simple hydrothermal route followed by calcination. The structures and morphologies of the as-synthesized products were characterized by X-ray diffraction, scanning electron microscopy, and Brunauer-Emmett-Teller (BET) surface area analysis, and the results showed that they were uniformly distributed on the Ni foam support. The surface chemical states of the elements in the samples were identified by X-ray photoelectron spectroscopy. The as-synthesized NiCo₂O₄ products were then tested as cathode materials for supercapacitors in a traditional three-electrode system. The electrochemical performances of the NiCo₂O₄ electrode materials were studied and the area capacitance was found to be 1.26 C·cm^-2 at a current density of 1 mA·cm^-2. Furthermore, outstanding cycling stability with 97.6% retention of the initial discharge capacitance after 10000 cycles and excellent rate performance (67.5% capacitance retention with the current density from 1 to 14 mA·cm^-2) were achieved. It was found that the Ni foam supporting the NiCo₂O₄ nanosheets increased the conductivity of the electrode materials. However, it is worth noting that the contribution of nickel foam to the areal capacitance of the electrode materials was almost zero during the charge and discharge processes. To further investigate the practical application of the as-synthesized NiCo₂O₄ nanosheets-based electrode, a device was assembled with the as-prepared samples as the positive electrode and active carbon (AC) as the negative electrode. The assembled supercapacitor showed energy densities of 0.14 and 0.09 Wh·cm^-3 at 1.56 and 4.5 W·cm^-3, respectively. Furthermore, it was able to maintain 95% of its initial specific capacitance after 10000 cycles. The excellent electrochemical performance of the NiCo₂O₄ nanosheets could be ascribed to their unique spatial structure composed of interconnected ultrathin nanosheets, which facilitated electron transportation and ion penetration, suggesting their potential applications as electrode materials for high performance supercapacitors. The present synthetic route can be extended to other ternary transition metal oxides/sulfides for future energy storage devices and systems.     

立方相KNbO3晶体本征空位点缺陷的电子结构研究

利用第一性原理从头计算方法对立方相KNbO3晶体的肖特基缺陷的稳定性、能带结构、电子态密度和磁性性质进行了研究.发现含本征点缺陷的KNbO3体系结构稳定;K,Nb空位诱导KNbO3缺陷晶体产生铁磁性;O空位则无此性质.K空位诱导KNbO3缺陷晶体磁性源于O原子2p轨道退简并;Nb空位诱导KNbO3缺陷晶体磁性源于O-2p电子极化.     

爆炸荷载下沉箱重力式码头模型毁伤效应

在野外条件下开展了不同爆炸荷载条件下沉箱重力式码头模型毁伤效应实验，得到了沉箱重力式码头模型在1 kg TNT当量空中爆炸、水下爆炸以及结构内部爆炸后的毁伤模式，并针对不同毁伤模式给出了相应的抢修建议。实验结果表明:空中爆炸荷载下码头仅面板局部破坏形成爆坑；水下爆炸荷载下码头迎爆面及相近区域形成大量裂缝；结构内部爆炸荷载下码头仓格大变形破坏且中间面板被掀飞；从横向对比来看，在相同爆炸当量下空中爆炸荷载下码头毁伤程度最小，结构内部爆炸荷载下码头毁伤程度最大。     

保温层结构对感应加热制备太阳能级多晶硅影响的数值模拟研究

定向凝固技术是制备太阳能级多晶硅的主要制备技术.在该技术路线之中,优化多晶铸锭炉的热场结构和控制硅熔体的对流形态是获得高品质多晶硅的有效途径之一.本文设计了三种热场保温层,通过分析不同保温层下坩埚内硅熔体的热场、流场、固液界面、氧含量等的变化,确定了优化的保温层结构.研究发现,在传统固化碳毡保温层中引入石墨层可以使多晶炉内形成两个“热源”,提高多晶炉的热效率,使其能耗降低了38.5;;在洛伦兹力的作用下硅熔体中仅存在一个上下贯通的涡流,有利于硅中杂质原子的挥发.同时,添加石墨保温层后固液界面的形状由“W”状转变为凹状,其上的氧含量有所降低,并且V/Gn值在整个固液界面范围内均大于临界值,可以有效抑制氧沉淀.可见,在感应加热多晶硅生长系统中,采用固化碳毡+石墨保温层时,有利于降低多晶硅的生产成本并提高多晶硅的品质.     

GGA+U法研究稀土(La、Ce、Pr、Nd)掺杂对ZnO电子结构和光学性质的影响

基于GGA+U的第一性原理方法,分析了La、Ce、Pr、Nd四种元素掺杂的ZnO结构,对晶体的结构、电子结构和光学性质进行了对比分析.由键布局分析可知,掺杂体系Zn-O键共价性的强弱与杂质掺入原子的序数成正比.掺杂后体系的类型仍为直接跃迁,能级整体下移;随着Pr、Nd掺入,出现了杂质能级,这是由稀土元素的4f电子态所导致.在光学性质方面,掺杂体系的吸收系数、静介电常数都比纯ZnO的高,体系的吸收边都向低能方向移动,其中Zn7LaO8的红移程度最高、静介电常数最大,说明其光催化能力和极化能力都最强.     

偏缠绕模的Frobenius性质

主要给出了偏缠绕模的Frobenius性质，推广了缠绕模相应的性质。     

基于苯基喹啉配体修饰的铱磷光配合物及其高效纯红光有机电致发光器件EI北大核心CSCD

通过对2,4⁃2R⁃苯基⁃4⁃甲基喹啉主配体进行修饰,在苯基空间位阻较小的2位和4位引入供或吸电子能力的取代基(甲基,Me或甲氧基,MeO),分别合成了2种铱磷光配合物(2,4⁃2Me⁃mpq)_(2)Ir(acac)和(2,4⁃2MeO⁃mpq)_(2) Ir(acac),采用元素分析、核磁共振谱和单晶X射线衍射对其组成和化学结构进行了表征与确认。它们的光致发光光谱发射波长分别为610 nm和580 nm,光致发光量子产率分别为75%和80%,HOMO/LUMO能级差分别为2.04 eV和2.19 eV。以纯红光发射的磷光配合物(2,4⁃2Me⁃mpq)_(2)Ir(acac)为客体材料,制备了结构为ITO/TAPC(30 nm)/CBP∶(2,4⁃2Me⁃mpq)_(2)Ir(acac)(30 nm)∶x%/TPBi(30 nm)/Liq(2 nm)/Al的OLED器件,并优化了掺杂浓度,在10%的优化浓度下实现了高效红光OLED发光。器件的发射波长为607 nm,CIE坐标为(0.63,0.37),最大亮度为25980 cd/m^(2),电流效率为23.11 cd/A,外量子效率(EQE)高达20.28%。