由正交表变换得到的2阶平衡的相关免疫函数

本本文给出了一种运用正交表变换来得到2阶相关免疫函数的特征矩阵的新方法,构造出10个不同的(8,4,2,2)特征矩阵,得到了几个相关结论。     

Low-loss terahertz waveguide with InAs-graphene-SiC structure

We demonstrate a low-loss terahertz waveguide based on the InAs-graphene-SiC structure. By analyzing the terahertz waveguide proposed in this paper, we can obtain that it is the characteristic of a low transmission loss coefficient(αloss≈0.55 dB/m) for fundamental mode(LP01) when the incident frequency is larger than 3.0 THz. The critical radii of the inside and outside cylinders have been found for the high-quality transmission. The large inside radius and the high transmission frequency result in a flat transmission loss coefficient curve. As a strictly two-dimensional material, the double graphene surface rings perform better to improve the quality of transmission mode. These results provide a new idea for the research of the long-distance THz waveguide.     

应用在线近红外光谱分析复烤前后原烟及片烟的质量特性

应用在2012年"中华"专用分拣复烤生产线中采集的7个产地的复烤前原烟和复烤后片烟的在线近红外光谱为试验资料,通过建立不同产地近红外光谱的投影分析模型,并结合方差及相关分析等,研究烟叶复烤前后的均一性及相似性等品质特征的变化,为客观的掌握烟叶原料质量及卷烟产品配方提供技术支撑。本研究结果表明,从数量庞大的在线近红外光谱中,按等间隔采样时间筛选约1万条左右用于建模分析可行,取样代表性充分;经人工分拣、打叶、复烤后的各产地烟叶近红外光谱的均一性提高幅度可达10%~35%,烟叶品质的均质化程度显著提高;同时复烤后各产地烟叶所体现的相似性关系亦发生了变化,从整体上其相似性显著降低,即由产地体现的风格品质差异显著提升,为优质卷烟的原料配方设计提供了更大空间,体现了我国烟草企业生产优质中式卷烟需要消耗大量财力、人力进行烟叶复烤加工的必要性。传统的化学分析等手段需要花费大量的时间和精力,难以对整个加工环节进行控制,近红外光谱技术以其快速、无损的优势,不仅能够实现待测样品成分含量等的实时检测与质量控制,而且应用生产过程中的大量近红外光谱,可以从多角度进行有关产品品质信息的充分挖掘,是一种在众多行业特别是农产品和食品加工行业中极具应用前景的在线分析检测技术。     

3d过渡金属Co掺杂核壳结构硅纳米线的第一性原理研究

基于密度泛函理论的第一性原理计算,研究了横截面为五边形和六边形的核壳结构硅纳米线的过渡金属Co原子替代掺杂.通过比较形成能发现,核心位置掺杂、壳层单链掺杂以及外壳层全替代掺杂的硅纳米线都具有稳定性,其中核心位置掺杂结构的稳定性最高.掺杂体系均呈现金属性,随着掺杂浓度的增加,电导通道数增加.Co原子掺杂的硅纳米线呈现铁磁性,具有磁矩.Bader电荷分析表明,电荷从Si原子转移至过渡金属Co原子.与自由态时过渡金属Co原子的磁矩相比,体系中Co原子的磁矩有所降低,这主要是由Co原子4s轨道向3d/4p轨道的电荷转移以及4s,3d,4p的上自旋电子转移至下自旋导致的.     

不同工艺尺寸CMOS器件单粒子闩锁效应及其防护方法

基于建立的不同工艺尺寸的CMOS器件模型,利用TCAD器件模拟的方法,针对不同工艺CMOS器件,开展了不同工艺尺寸CMOS器件单粒子闩锁效应(SEL)的研究。研究表明,器件工艺尺寸越大,SEL效应越敏感。结合单粒子闩锁效应触发机制,提出了保护带、保护环两种器件级抗SEL加固设计方法,并通过TCAD仿真和重离子试验验证防护效果,得出最优的加固防护设计。结果表明,90nm和0.13μm CMOS器件尽量选用保护带抗SEL结构,0.18μm或更大工艺尺寸CMOS器件建议选取保护环抗SEL结构。     

Quantum oscillations in a hexagonal boron nitride-supported single crystalline InSb nanosheet

A gated Hall-bar device is made from an epitaxially grown, free-standing InSb nanosheet on a hexagonal boron nitride (hBN) dielectric/graphite gate structure and the electron transport properties in the InSb nanosheet are studied by gate-transfer characteristic and magnetotransport measurements at low temperatures. The measurements show that the carriers in the InSb nanosheet are of electrons and the carrier density in the nanosheet can be highly efficiently tuned by the graphite gate. The mobility of the electrons in the InSb nanosheet is extracted from low-field magneotransport measurements and a value of the mobility exceeding $\sim 1.8\times10^4$ cm$^{2}\cdot$V$^{-1}\cdot$s$^{-1}$ is found. High-field magentotransport measurements show well-defined Shubnikov-de Haas (SdH) oscillations in the longitudinal resistance of the InSb nanosheet. Temperature-dependent measurements of the SdH oscillations are carried out and key transport parameters, including the electron effective mass $m^{\ast }\sim 0.028 m_{0}$ and the quantum lifetime $\tau \sim 0.046 $ ps, in the InSb nanosheet are extracted. It is for the first time that such experimental measurements have been reported for a free-standing InSb nanosheet and the results obtained indicate that InSb nanosheet/hBN/graphite gate structures can be used to develop advanced quantum devices for novel physics studies and for quantum technology applications.     

一类静态分岔问题

本文分析了一种特殊的分岔,讨论了它的ＮＯＲＭＡＬ ＦＯＲＭ和普适开折问题,对Ｚ２对称情况,给出了普适开折和相应分岔图,因在开折参数不等于０时,其分岔图分别具有树枝分岔和简单分岔的特征,文中称该分岔点为半树枝／半简单分岔点,对Ｚ２对称性破缺的情况,利用奇异性理论,导出了余维数为５的普适开折的所有４种形式,并结合具体的应用给出了其部分分岔图。     

空间用GaN功率器件单粒子烧毁效应激光定量模拟技术研究

利用飞秒脉冲激光对氮化镓(GaN)功率器件进行单粒子烧毁效应定量评估技术研究,针对器件结构建立脉冲激光有效能量传输模型,理论计算了激光有效能量与重离子线性能量传输(LET)的等效关系并开展了试验验证.考虑器件材料反射率与吸收系数对激光的影响,针对介质层界面间的激光多次反射进行参数修正,减小有源区有效能量计算误差.选择一款氮化镓高电子迁移率晶体管(GaN HEMT)与一款肖特基势垒二极管(SBD)功率器件作为典型案例,分别开展飞秒脉冲激光正面与背部辐照试验,计算诱发单粒子烧毁的有效能量,并得到不同入射激光波长的烧毁等效LET阈值,对比了模型理论计算值与实际测量值.同时,研究结果对材料参数未知的GaN功率器件,提供了正面与背部辐照模型的激光试验波长选择参考.该工作将为激光定量评估空间用GaN等宽禁带半导体器件的单粒子烧毁效应机理研究及加固设计与验证提供技术支撑.     

Effective sideband cooling in an ytterbium optical lattice clock

Sideband cooling is a key technique for improving the performance of optical atomic clocks by preparing cold atoms and single ions into the ground vibrational state. In this work, we demonstrate detailed experimental research on pulsed Raman sideband cooling in a $^{171}$Yb optical lattice clock. A sequence comprised of interleaved 578 nm cooling pulses resonant on the 1st-order red sideband and 1388 nm repumping pulses is carried out to transfer atoms into the motional ground state. We successfully decrease the axial temperature of atoms in the lattice from 6.5 μK to less than 0.8 μK in the trap depth of 24 μK, corresponding to an average axial motional quantum number $\langle n_z\rangle<0.03$. Rabi oscillation spectroscopy is measured to evaluate the effect of sideband cooling on inhomogeneous excitation. The maximum excitation fraction is increased from 0.8 to 0.86, indicating an enhancement in the quantum coherence of the ensemble. Our work will contribute to improving the instability and uncertainty of Yb lattice clocks.