Interface effect between blue phosphorus and metals

The contacted properties of metal substrates with single layer (monolayer) blue phosphorus are calculated by first principles. We analyze the charge transfer, atomic orbital overlap, electronic properties and potential barrier at the interface of metal contacted blue phosphorene (BuleP) to understand how to effectively inject electrons from the metal into the contacted blue phosphorus. We inquire into interfacial effect of blue phosphorene directly in contact with five representative metallic substrates – Au (111), Ag(111), Al(111), Co(111) and Sc(0001), which are having minimal lattice mismatch with the BlueP. We find that the contact properties of these five metals are ohmic contact and schottky contact. Of the five different contact metals, Co-BlueP heterojunction has the best electrical conductivity. The lower SBH in the Al contact can also lead to a good substrate for a Schottky contact for the heterojunction. These results can provide guidance for the future design of BlueP-based electronic devices and for the exploration of new low-dimensional semiconductor transport processes.     

The effect of two ferromagnetic metal stripes on valley polarization of electrons in a graphene

As the key factor for designing the valleytronic devices is to well understand the valley-dependent transport mechanism in graphene, we investigate, in this work, the effect of two ferromagnetic (FM) metal stripes on the valley polarization in a graphene nanostructure with a strain. The nearly 100% valley polarization is observed at certain energy windows and it can be easily controlled through changing the width and the position of the FM stripe as well as the strength of the magnetic field induced by the FM stripe. Our interesting findings reveal the valley-dependent transport mechanism of electrons and promote the realization of the new types of valleytronic devices modulated by the FM stripe and the strain.     

超空泡射弹水下侵彻靶板三相耦合数值模拟

超空泡射弹侵彻问题的实质是特殊水下结构受到高速冲击载荷作用下的动态响应。对12.7 mm口径超空泡射弹侵彻典型水下目标壳体的毁伤效果开展研究,基于LS-DYNA有限元分析软件建立水环境中超空泡射弹垂直侵彻曲面靶板的等效模型,探讨射弹侵彻过程中动能侵彻和气泡溃灭对靶板联合毁伤效果,获得了靶板在各阶段的应力变化和结构变形规律。结果表明:侵彻靶板前,射弹着靶速度为200 m/s时的头部表面水介质压力峰值达768 N,靶板表面有明显下凹变形;侵彻靶板时,伴随着射弹动能侵彻和气泡溃灭冲击,水介质造成的影响不足动能侵彻的2%;侵彻靶板后,在靶板正面形成峰值速度为42 m/s的水射流进一步作用于破口;靶板整体弯曲变形,在200~300 m/s范围内,随着射弹着靶速度的增加,靶板弯曲形变量减小;靶板局部发生延性穿孔,射弹在水环境中具有更好的破口效果,射弹速度变化对破口尺寸影响不大。     

Evaluation of singular integrals for anisotropic elastic boundary element analysis

To improve the numerical evaluation of weakly singular integrals appearing in the boundary element method, a logarithmic Gaussian quadrature formula is usually suggested in the literature. In this formula the singular function is expressed in terms of the distance between source point and field point, which is a real variable. When an anisotropic elastic solid is considered, most of the existing fundamental solutions are written in terms of complex variables. When the problems with holes, cracks, inclusions, or interfaces are considered, to suit for the shape of the boundaries usually a mapping function is introduced and then the solutions are expressed in terms of mapped complex variables. To deal with the trouble induced by the complex variables, in this study through proper change of variables we develop a simple way to improve the evaluation of weakly singular integrals, especially for the problems of anisotropic elastic solids containing holes, cracks, inclusions, or interfaces. By simple matrix expansion, the proposed method is extended to the problems with piezoelectric or magneto-electro-elastic solids. By using the dual reciprocity method, the proposed method employed for the elastostatic fundamental solution can also be applied to the elastodynamic analysis.     

Probabilities of incidence between lines and a plane curve over finite fields

We study the probability for a random line to intersect a given plane curve, over a finite field, in a given number of points over the same field. In particular, we focus on the limits of these probabilities under successive finite field extensions. Supposing absolute irreducibility for the curve, we show how a variant of the Chebotarev density theorem for function fields can be used to prove the existence of these limits, and to compute them under a mildly stronger condition, known as simple tangency. Partial results have already appeared in the literature, and we propose this work as an introduction to the use of the Chebotarev theorem in the context of incidence geometry. Finally, Veronese maps allow us to compute similar probabilities of intersection between a given curve and random curves of given degree.     

A Study of the Role of Microfractures in Counter-Current Spontaneous Imbibition by Lattice Boltzmann Simulation

Transport in Porous Media - During waterflooding, spontaneous imbibition is a fundamental recovery mechanism in fractured reservoirs. A large number of numerical and experimental studies have been...     

Some optimizations on detecting gravitational wave using convolutional neural network

This work investigates the problem of detecting gravitational wave (GW) events based on simulated damped sinusoid signals contaminated with white Gaussian noise. It is treated as a classification problem with one class for the interesting events. The proposed scheme consists of the following two successive steps: decomposing the data using a wavelet packet, representing the GW signal and noise using the derived decomposition coefficients; and determining the existence of any GW event using a convolutional neural network (CNN) with a logistic regression output layer. The characteristic of this work is its comprehensive investigations on CNN structure, detection window width, data resolution, wavelet packet decomposition and detection window overlap scheme. Extensive simulation experiments show excellent performances for reliable detection of signals with a range of GW model parameters and signal-to-noise ratios. While we use a simple waveform model in this study, we expect the method to be particularly valuable when the potential GW shapes are too complex to be characterized with a template bank.     

含集中质量悬臂输流管的稳定性与模态演化特性研究

本文主要研究通过调控集中质量对悬臂输流管稳定性和振动模态特性的影响规律,为输流管动力学性能的可控性提供理论指导和实验依据. 首先基于扩展的哈密顿原理,建立了含集中质量悬臂输流管的非线性动力学理论模型. 基于线性动力学特性分析,研究发现集中质量沿管道轴向位置变化对输流管发生颤振失稳的临界流速有重要影响.并通过伽辽金前四阶模态截断处理线性矩阵方程式,定性地分析了集中质量位置与质量比的变化对于输流管稳定性影响的变化.实验结果表明, 输流管的颤振失稳模态随集中质量位置的变化发生了转迁. 此外,基于动力学理论分析, 发现集中质量比值对失稳临界流速也有重要的影响,且主要取决于集中质量的安装位置. 基于非线性特性,进一步分析了集中质量对输流管振动幅值的影响. 实验和理论研究发现,集中质量位置从固定端向自由端变化时, 输流管振幅表现出先增大后减小趋势,且振动模态也从二阶转迁到三阶.本研究有望为输流管振动驱动应用提供理论支撑与指导意义.      

群集建筑中大跨裙摆屋盖风荷载特性的数值模拟研究

以苏州太平金融大厦为工程背景,针对其大跨裙摆屋盖的风荷载作用,首先采用RNG k-ε模型模拟分析了其平均风压分布规律,以及风向变化对屋盖表面风荷载体型系数的影响;其次,引入干扰因子IF,探讨了周边建筑对大跨裙摆屋盖风荷载的气动干扰作用。结果表明:0°风向下,走廊上方屋盖两侧区域出现“上吸下顶”的叠加作用;90°风向下屋盖北侧飘带末端区域受到狭道风效应出现正压集中现象;风向变化对大跨裙摆屋盖的风荷载体型系数分布影响较大;且周围建筑物对大跨裙摆屋盖的气动干扰效应明显,主要表现为风压“遮挡效应”,而局部区域表现为风压“放大效应”。     

Thermometric analysis of blood metabolites in ICU patients

Journal of Thermal Analysis and Calorimetry - Real-time monitoring of patient’s blood metabolites, such as glucose and lactate, could potentially improve surgery and recovery outcomes for...