STRUCTURING ＆ RHEOLOGY OF MOLTEN POLYMER／CLAY NANOCOMPOSITES

The evolution and the origin of “solid-like state” in molten polymer/clay nanocomposites are studied. Using polypropylene/clay hybrid (PPCH) with sufficient maleic anhydride modified PP (PP-MA) as compatibilizer, well exfoliation yet solid-like state was achieved after annealing in molten state. Comprehensive linear viscoelasticity and non-linear rheological behaviors together with WAXD and TEM are studied on PPCH at various dispersion stages focusing on time,temperature and deformation dependencies of the “solid-like” state in molten nanocomposites. Based on these, it is revealed that the solid-structure is developed gradually along with annealing through the stages of inter-layer expansion by PP-MA,the diffusion and association of exfoliated silicate platelets, the formation of band/chain structure and, finally, a percolated clay associated network, which is responsible for the melt rigidity or solid-like state. The network will be broken down by melt frozen/crystallization and weakened at large shear or strong flow and, even more surprisingly, may be disrupted by using trace amount of silane coupling agent which may block the edge interaction of platelets. The solid-like structure causes characteristic non-linear rheological behaviors, e.g. residual stress after step shear, abnormal huge stress overshoots in step flows and, most remarkably, the negative first normal stress functions in steady shear or step flows. The rheological and structural arguments challenge the existing models of strengthened entangled polymer network by tethered polymer chains connecting clay particles or by chains in confined melts or frictional interaction among tactoids. A scheme of percolated networking of associated clay platelets, which may in band form of edge connecting exfoliated platelets, is suggested to explain previous experimental results.     

Synthesis of Fullerene-end Functionalized Poly（methyl methacrylate） via Reverse Atom Transfer Radical Polymerization

The use of the reverse atom transfer radical polymerization （RATRP） to end-functionalize poly（methyl methacrylate） （PMMA） with fullerenes, e.g. C60 and C70 was described in this paper. The Cl-terrninated PMMA was prepared via RATRP with designed molecular weight and narrow molecular weight distributions, and then directly used to react with fullerenes to produce C60（C70） terminated PMMA polymers in the presence of CuBr/Cu/bipy or FeCl2/bipy catalysts. The resultant polymers exhibit good solubility in some common organic solvents, e.g. THF, CHCl3 and toluene, and were well structurally characterized by a variety of physical techniques.     

苯丙水溶胶的合成与性能研究(I) 聚合工艺和反应组分对聚合稳定性和胶体性能的影响

用一次投料法、半连续滴加法和单体预乳化法三种聚合工艺，合成了苯丙乳液聚合物，并加氨微细化，转化成水溶胶，考察了聚合工艺和反应组分（乳化剂，功能单体等）对苯丙乳液及其水溶胶反应稳定性和粒子大小及分布等胶体性能的影响。     

Synthesis of Thiourea Derivatives on Soluble Polymeric Support

A modified poly(ethylene glycol) (PEG) has been developed as the soluble polymeric supports for liquid phase synthesis of novel thiourea derivatives.In each step of the sequence,the PEG-bound products were precipitated in cold Et2O and the unreacted materials and by-products were removed by simple filtration.The progress of reaction,purity of the isolation and the structure of the PEG-bound products were easily monitored by TLC,IR and ^1H NMR spectra.Representative thiourea derivatives were obtained in moderate yields with excellent purity from this modified PEG-bound product by the cleavage with 50% TFA/H2O.     

交联聚乙烯基吡咯烷酮的合成及其性能研究

以乙烯基吡咯烷酮（NVP）为单体，二乙烯基苯为交联剂，AIBN为引发剂，采用悬浮聚合法合成了性能稳定的交联聚乙烯基吡咯烷酮（PVPP），研究了聚合温度，引发剂用量，交联剂用量和反应气氛等因素对产率，溶胀性能和吸附性能的影响，并用红外光谱和扫描电镜等对产物的结构、性能和表面形貌进行了表征。     

NH_2基态和激发态的SAC－CI和量子拓扑方法研究

ＮＨ_２基态和激发态的ＳＡＣ－ＣＩ和量子拓扑方法研究郑世钧，蔡新华，宋天乐，孟令鹏，中迁博，波田雅彦（河北师范学院化学系，石家庄，０５００９１）（京都大学工程学院京都，日本）关键词ＳＡＣ－ＣＩ方法，激发态，电子密度，拓扑分析用量子拓扑学方法研究激发态...     

新型高吸水聚合物凝胶型屏蔽暂堵剂MTC-1的合成及性能

以丙烯酸（AA）、丙烯酰胺（AM）、2-丙烯酰胺基-2-甲基丙磺酸（AMPS）为原料，蒙脱土（MMT）为改性剂，过硫酸钾和无水亚硫酸氢钠为氧化还原引发体系，六亚甲基四胺（C₆H₁₂N₄）为交联剂，采用水溶液聚合法合成了一种新型高吸水聚合物凝胶型屏蔽暂堵剂（MTC 1），其结构经IR表征。在最优合成条件（AM/AMPS/AA=11/7/1, m/m/m，引发剂加量0.6 wt%，于45 ℃反应2.5 h）下，MTC-1的最大吸水倍率为1006倍。岩心流动实验结果表明：MTC-1的堵水性能较高，封堵效率达到83.72%。     

《高分子化学》课程中“活性自由基聚合”的教学实践

《高分子化学》课程是五大化学基础课程(无机化学、有机化学、分析化学、物理化学、高分子化学)之一,是化学类、高分子材料与工程、材料化学专业的必修课程。"活性"/可控自由基聚合是一种相对较新且重要的聚合物合成技术和方法,针对目前《高分子化学》课程中活性自由基聚合的教学比较薄弱的现状,从教学的角度探讨了活性聚合和可控/"活性"自由基聚合的本质和特点,介绍了本人在这方面的教学实践活动,遵循成果导向教育理念,通过以学为中心的教学方式,打造金课,提高教学质量。     

超支化聚硅(碳/氧)烷的研究进展

总结了近十年来超支化聚有机硅(碳/氧)烷的研究进展,其中着重综述了硅氢加成反应、亲核取代反应和脱氢反应在制备超支化聚硅(碳/氧)烷的过程中各种因素对反应过程及产物物化性能的影响。     

本体聚合制备Sm(OPr~i)(TTA)_2/PMMA光致发光材料

合成了(异丙氧基)二(α-噻吩甲酰三氟丙酮基)钐[Sm(OPri)(TTA)2]配合物,并通过本体聚合制备Sm(OPri)(TTA)2/PMMA光致发光材料,采用IR1、H-NMR、XRD、DMTA、FS、ESEM对其进行表征.结果表明,Sm-(OPri)(TTA)2/PMMA在396 nm波长激发下在562、598、644 nm处发射很强的Sm3+离子4G5/2→6H5/2,4G5/2→6H7/2,4G5/2→6H9/2跃迁的特征荧光,其发光强度与Sm(TTA)3/PMMA相当;其储能模量E′、玻璃化温度Tg和粘流温度Tf均比PMMA有所提高;Sm(OPri)3/PMMA形成类似交联结构聚合物,而Sm(OPri)(TTA)2/PMMA为线型无定型结构聚合物.