超支化聚碳硅氮烷的合成与表征

聚碳硅氮烷是一种新型含硅有机金属聚合物,其主链由硅氮碳连接而成,侧链为有机基团;与其它含硅聚合物(聚硅氮烷、聚碳硅烷等)类似,聚碳硅氮烷适于用做力学性能极佳且耐高温氧化的氮化硅(Si3N4)和氮化硅/碳化硅(Si3N4/SiC)复相陶瓷的前驱体.[1]超支化聚合物具有溶解性好、粘度低     

超支化聚硅碳烷-g-环糊精聚合物刷的合成与表征

通过硅氢加成反应和核多步法聚合合成出超支化聚硅碳烷(HBP),并对其端基进行了硅氢化、羟基化和酰氯化三步改性得到大分子引发剂HBP-Cl;再用其引发甲基丙烯酸N,N-二甲氨基乙酯(DMA)进行原子转移自由基聚合(ATRP),得到超支化聚硅碳烷-g-聚甲基丙烯酸N,N-二甲氨基乙酯(HBP-g-PDMA),最后将单-6-碘代β-CD通过离子键固载到PDMA链上,得到超支化聚硅碳烷-g-环糊精聚合物刷(HBP-g-PDMA-β-CD).采用FTIR、1H-NMR、13C-NMR、29Si-NMR对其结构进行了表征,利用凝胶渗透色谱/多角度激光光散射(SEC/MALLS)联用仪和激光粒度分析仪研究了其高分子的精细结构,并通过元素分析研究了固载时间对β-CD固载量的影响.     

紫外光引发硅氢加成反应制备超支化聚碳硅氮烷

在二乙酰丙酮铂存在下, 以紫外光引发AB4型单体双(N,N-二烯丙基胺基)甲基硅烷发生硅氢加成反应, 制备了超支化聚碳硅氮烷. 聚合产物通过FTIR, 1H NMR, 13C NMR和29Si NMR谱和体积排除色谱/激光光散射联用技术进行表征. 与常规加热条件下Karstedt's催化剂催化的硅氢加成聚合相比, 光引发聚合的反应速度快. 波谱分析表明, 聚合过程中以α位硅氢加成反应为主. 光引发聚合制备的超支化聚碳硅氮烷支化度(DB)和平均支化数(ANB)分别为0.46和0.53, 与理论值相近. 其重均分子量为12500 g/mol, 分子量分布系数为2.1, Mark-Houwink方程指数α为0.44, 与热聚合制备的超支化聚碳硅氮烷的参数相近.     

超支化烯丙基聚硅氮烷-巯基化合物体系紫外光固化研究

采用等温差示光量热扫描技术(DPC)研究了超支化烯丙基聚硅氮烷-巯基化合物体系的紫外光固化.对比了超支化聚合物-巯基化合物体系、二官能烯丙基硅氮烷-巯基化合物体系和超支化自聚体系的紫外光固化特性,结果表明超支化-巯基化合物体系可在引发剂浓度低(0.1wt%)、辐照强度低(5mW/cm2)的情况下迅速发生光固化反应;与超支化自聚反应相比固化速率高、双键转化率高;而与低官能-巯基化合物体系相比,由于超支化分子结构的独特性,导致固化速率快,双键转化率偏低.对引发剂浓度、辐照强度和反应温度对固化行为的影响表明,在引发剂浓度不超过0.5wt%和辐照强度不大于30.50mW/cm2时,反应速率分别与引发剂浓度和辐照强度的1/2次方成线性关系.运用带扩散因子的自催化固化动力学模型研究了不同温度下的固化行为,计算出特定条件下的光固化动力学参数,表观总反应级数约为8.76,表观活化能为13.97kJ/mol.     

改性超支化聚硅碳烷物理吸附涂层毛细管柱的分离性能研究

利用羟丙基-β-环糊精对合成的超支化聚硅碳烷进行表面接枝改性,通过物理吸附的方法将改性后的超支化聚硅碳烷涂覆于毛细管柱内壁表面,制备出一种新型的毛细管电泳涂层柱.选用16 kV的分离电压、214 nm紫外检测波长、10 cm位差进样7 s和40 mmol/L磷酸盐缓冲体系为分离条件,考察氧氟沙星和扑尔敏两种手性异构体在涂层柱上的分离性能以及涂层柱的稳定性能.在pH 3.0时,对氧氟沙星的分离度为1.81,理论塔板数为4.68×104 plates/m;在连续进样100次后,分离度变化不大,理论塔板数下降率在15%以内,涂层柱运行稳定,各项性能均取得满意的效果.     

聚硅乙炔烷的合成与性能研究

70年代初苏联学者首次报道了聚硅乙炔烷的合成^[1],1973年有人用炔化钙和二甲基二氯硅烷在熔融盐中反应,结果得到四环体物(Me₂SiC≡C)₄^[2]。为了研究这类聚合物的性能,我们采用了新的合成路线合成可熔的聚硅乙炔烷。乙炔和格氏试剂发生交换反应,生成炔基双格氏试剂,它和有机二氯硅烷发生缩聚反应,生成聚硅乙炔烷。     

可紫外光固化的超支化聚硅氧烷合成及固化研究

同线型聚硅氧烷聚合物相比，超支化聚硅氧烷聚合物具有低粘度、高反应活性和良好的相容性等特点，其中以制备超支化的聚硅氧烷基硅氧烷和聚烷氧基硅氧烷为主．对于超支化聚硅氧烷主要是以ABx（X=2～6）（其中A为双键，B为硅氢键）型单体为原料，在氯铂酸或Pt／C的催化下，通过硅氢加成反应一步制备，最终聚合物的端基（B）为硅氢键，而双键则完全反应，此外也可通过含不同数目烷氧基硅烷的水解缩合制备超支化聚硅氧烷．     

大分子植酸-聚有机硅倍半氧烷的合成及性能

采用溶胶-凝胶方法, 无需小分子酸催化剂, 利用硅烷化植酸的反应活性和酸催化活性, 与硅烷单体共水解缩聚, 在聚有机硅倍半氧烷分子链上原位接枝植酸, 合成了分子量大于50000的大分子植酸-聚有机硅倍半氧烷. 用GPC, 13C NMR, 29Si NMR, XPS, Raman光谱, SEM及电化学测试等分析手段进行表征, 对比不同酸催化植酸-聚有机硅倍半氧烷(PAP), 单宁酸-聚有机硅半氧烷(TAP), 盐酸-聚有机硅半氧烷(HCP)的结构和性能, 发现植酸-聚有机硅倍半氧烷上的螯合基团与金属表面的活性基团反应而键合, 在金属表面形成致密的保护膜, PAP与TAP和HCP比较具有优异的防腐性能.     

无皂乳液聚合制备硅铝氧烷/PMMA复合体系

硅铝氧烷溶胶;聚甲基丙烯酸甲酯复合体系;无皂乳液聚合制备硅铝氧烷/PMMA复合体系     

桥联法制备高软化点聚碳硅烷及其可纺性

采用适当分子量的低软化点聚碳硅烷(LPCS)和四甲基二乙烯基二硅氮烷(TMDS)为原料,利用硅氢加成反应合成了高软化点聚碳硅烷(HPCS).研究了该反应的过程与特点,探讨了TMDS加入比例对产物特性的影响及其结构变化与可纺性的关系.结果表明,反应初期首先形成含乙烯基侧基的悬挂式结构,并随着硅氢加成反应完成,在LPCS分子间形成Si—N—Si桥联式结构.通过控制TMDS的加入比例,可以调控桥联反应程度从而控制产物的分子量及软化点.控制TMDS/LPCS质量比为0.08,得到了软化点为244~278℃,Mn=2.5×103,分子量呈双峰分布且具有良好可纺性的聚碳硅烷,适用于制备高性能连续Si C纤维.     

Temperature Dependence of the Hydrodynamic and Conformational Properties of Hyperbranched Polycarbosilanes

Three types of carbosilane hyperbranched polymers were studied in dilute solution in toluene. The samples had different lengths of chains between branch points and the structure of terminal groups (butyl, undecenyl, or fluorine containing). The temperature dependences of intrinsic viscosity and second virial coefficient values were determined by viscometry and static light scattering methods. It is shown that conformational characteristics of hyperbranched polycarbosilanes do not depend on the thermodynamic quality of a solution in the wide range of temperatures.     

Hyperbranched polymers versus dendrimers containing a carbosilane framework and terminal ammonium groups as antimicrobial agents

A new family of amine- and ammonium-terminated hyperbranched polycarbosilanes (PCS) and dendrimers has been synthesized. The functionalization of a polycarbosilane matrix was carried out with peripheral allyl groups by two strategies in the case of PCS: 1) hydrosilylation of allyl amines with PCS containing terminal Si-H bonds, or 2) hydrosilylation of PCS-allyl with an aminosilane. Dendrimers with terminal amine groups were synthesized by hydrosilylation of allydimethylamine. Quaternized systems with MeI are soluble and stable in water or other protic solvent. The antibacterial properties of the ammonium-terminated hyperbranched polycarbosilanes and dendrimers have been evaluated showing that they act as potent biocides against Gram-positive and Gram-negative bacterial strains.     

Effect of the length of branches on hydrodynamic and conformational properties of hyperbranched polycarbosilanes

The hydrodynamic and conformational properties of hyperbranched polycarbosilanes with different lengths of branches, namely, poly(methyl(allyl)carbosilane) containing three CH₂ groups between branching centers and poly(methyl(undecenyl)carbosilane) whose branches are composed of 11 CH₂ groups, have been studied in dilute solutions in hexane using the methods of molecular hydrodynamics and optics. Fractions with M < 17.5 × 10⁴ have been used in experiments. The hydrodynamic properties of the above polycarbosilanes differ significantly from those of linear polymers since hyperbranched macromolecules are compact and their shape differs only slightly from spherical. The lengthening of chains between branching centers causes a change in the hydrodynamic characteristics, and the difference between hyperbranched polymers and dendrimers becomes more pronounced. As the length of branches increases, their conformation changes from an extended trans chain to a more or less bent rod.     

Rheological properties of sulfur-containing hyperbranched polycarbosilanes and related magnetic compositions

Russian Chemical Bulletin - The rheological properties of hyperbranched polycarbosilanes with butyl and decyl terminal groups and their sulfur-containing analogs were compared. The use of various...     

UV‐activated hydrosilylation: a facile approach for synthesis of hyperbranched polycarbosilanes

A facile approach for synthesis of hyperbranched polycarbosilane from AB₂ monomer via UV‐activated hydrosilylation is presented in this communication. The polymerization process was monitored using real‐time FTIR spectroscopy and the resulting hyperbranched polycarbosilanes were characterized using ¹H‐NMR, ¹³C‐NMR, ²⁹Si‐NMR and SEC/MALLS. It is found that hyperbranched polycarbosilane can be synthesized from methyldiallylsilane via UV‐activated hydrosilylation with bis(acetylacetonato)platinum(II) as catalyst. The polymerization activated by UV irradiation was much faster than that under thermal conditions. The similar degree of branching, average number of branch units and the exponent of the Mark–Houwink equation demonstrate that the hyperbranched polycarbosilane synthesized via UV‐activated polyhydrosilylation possesses almost the same branching structure as that synthesized via thermal‐activated polyhydrosilylation. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of polycarbosilanes by A2 + Bn (n = 2, 3, and 4) type hydrosilylation reaction and evaluation of their refractive index properties

Polycarbosilanes were synthesized by hydrosilylation reaction of A₂ monomer containing bis Si? H moieties and B_n (n = 2, 3, and 4) monomers containing di‐, tri‐, and tetra‐vinyl groups in the presence of Karstedt's catalyst. The corresponding linear polycarbosilanes (LPC) and hyperbranched polycarbosilanes (HBPC) having M_n 2200–51,500 were obtained in 34–94% yield, without any gel product. The values of refractive index (n_D) of the synthesized LPC and HBPC were in the range from 1.460 to 1.711, and were consistent with the structures of the synthesized products. In the case of HBPC, the values of n_D increased with increase of number‐average molecular weight (M_n), molecular weight distribution (M_w/M_n), and glass transition temperature (T_g), apparently because of increased density due to the presence of microgels, that is, high refractive index hyperbranched carbosilanes could be synthesized by A₂ + B_n (n = 3 and 4) method. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Activation of Si-C bonds and synthesis of silicon-functional polycarbosilanes

The functionalization of polycarbosilanes was studied using poly(vinyltrimethylsilane) as an example. The possibility of synthesizing of silicon-functional polycarbosilanes by the catalytic activation of Si-C-bonds involving catalytic systems based on compounds of metals of III, VI, and VIII groups was shown Properties of the obtained polymers are discussed.Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 7, pp. 1861–1863, July, 1996.     

Hyperbranched molecular nanocapsules: comparison of the hyperbranched architecture with the perfect linear analogue

The results of a comparative study of hyperbranched, partially esterified polyglycerols with their linear polyglycerol analogues with respect to molecular encapsulation and phase transfer are reported. Two hyperbranched polyglycerol samples with molecular weights of 3000 and 8000 g/mol (Mw/Mn = 1.3), respectively, have been partially esterified using palmitoyl chloride. The same modification was applied to the structurally analogous linear polyglycerol (3000 g/mol). A detailed UV-vis study correlated with viscosity experiments demonstrated that only the hyperbranched core-shell structures form "nanocapsules", leading to the encapsulation of polar guest molecules. The results underline the crucial role of the hyperbranched topology and the resulting solution conformation for supramolecular guest encapsulation and phase transfer. The unusually compact ("collapsed") structure assumed by the hyperbranched core-shell amphiphiles in apolar media is responsible for the formation of a hydrophilic compartment, capable of irreversibly taking up guest molecules.     

超支化/星形聚合物电解质的研究进展

与液体电解质相比较,聚合物电解质以其易加工、设计灵活、质量轻、安全无毒的特点而受到人们的广泛关注,具有取代液态电解质的潜在应用价值,而超支化/星形聚合物以其无定形、低玻璃化转变温度、支化结构等特点可被用于固态电解质。本文综述了超支化/星形聚合物电解质材料的研究进展,重点介绍了超支化/星形聚合物基电解质和超支化/星形聚合物共混基电解质,并对超支化/星形聚合物单一离子导体在锂离子电池方面的应用前景作了概述。