Centrality dependence of pT spectra for identified hadrons in Au+Au and Cu+Cu collisions at √sNN= 200GeV

The centrality dependence of transverse momentum spectra for identified hadrons at midrapidity in Au+Au collisions at √s_NN= 200GeV is systematically studied in a quark combination model. The p_T spectra of π^±, K^±, p(p) and Λ(Λ) in different centrality bins and the nuclear modification factors (R_CP) for these hadrons are calculated. The centrality dependence of the average collective transverse velocity 〈β(r)〉 for the hot and dense quark matter is obtained in Au+Au collisions, and it is applied to a relative smaller Cu+Cu collision system. The centrality dependence of p_T spectra and the R_CP for π⁰, K_s⁰ and Λ in Cu+Cu collisions at √s_NN= 200GeV are well described. The results show that 〈β(r)〉 is only a function of the number of participants N_part and it is independent of the collision system.     

An explanation for deviations from the quark number scaling of elliptic flows in low pT region

We carry out a systematic study of the different contributions to the deviations of the elliptic flows from the quark number scaling in high energy heavy ion collision in a quark combination model. The effects that we considered are: the resonance decay, the flavor dependence of the quark elliptic flow and the combination of quarks/antiquarks with slightly different transverse momenta. Our results show that the deviations observed in experiments can be well reproduced within the combination framework if all the three effects are considered. We make a detailed analysis of the different contributions using a Monte-Carlo program and suggest measuring the quark number scaling in intermediate p_T range more precisely.     

Influence of Different Substrates on Laser Induced Damage Thresholds at 1064nm of Ta2O5 Films

Ta2O5 films are prepared on Si, BK7, fused silica, antireflection （AR） and high reflector （HR） substrates by electron beam evaporation method, respectively. Both the optical property and laser induced damage thresholds （LIDTs） at 1064 nm of Ta2O5 films on different substrates are investigated before and after annealing at 673 K for 12 h. It is shown that annealing increases the refractive index and decreases the extinction index, and improves the O/Ta ratio of the Ta2O5 films from 2.42 to 2.50. Moreover, the results show that the LIDTs of the Ta2O5 films are mainly correlated with three parameters： substrate property, substoichiometry defect in the films and impurity defect at the interface between the substrate and the films. Details of the laser induced damage models in different cases are discussed.     

L-Shell X-Ray Yields and Production Cross Sections of Zr and Mo Bombarded by Slow Highly Charged Ar16+ Ions

The L-shell x-ray yields of Zr and Mo bombarded by slow Ar16＋ ions are measured. The energy of the Ar^16＋ ions ranges from about 150 keV to 350 keV. The L-shell x-ray production cross sections of Zr and Mo are extracted from these yields data. The explanation of these experimental results is in the framework of the adiabatic direct- ionization and the binding energy modified BEA approximation. We consider, in the slow asymmetric collisions such as Ar and Mo/Zr, the transient united atoms （UA） are formed during the ion-surface interaction and the direct-ionization is the main mechanism for the inner-shell vacancy production. Generally, the theoretical results are in good agreement with the experimental data.     

W态纠缠实现双腔远程控制原子的非经典特性

考虑将双模纠缠相干光场的两模场同时分别注入两个腔中,初态处于W态的三体纠缠二能级原子中的两个分别在这两个腔内,并且都与光场发生共振相互作用,经腔QED演化之后,对纠缠相干光场进行光子探测和对纠缠原子进行选择性测量,通过操纵相互作用的时间和光场的参数可控制W态中处于腔外的第三个原子的非经典效应,如粒子数布居差的崩塌一回复现象和偶极压缩现象,从而实现了更强地远程控制原子的非经典特性.     

反射型导模共振滤波器设计

导模共振滤波器由于其高峰值反射率,低旁带反射,窄带以及带宽可控等优良特性引起了人们极大的关注,采用亚波长光栅的导模共振效应可以实现传统基于高低折射率介质的多层膜滤波器所无法实现的特殊功能,在弱调制模式下,其共振带宽可以被压缩到零点几纳米,但是由于介质表面和空气层的菲涅耳反射,使得偏离或者远离共振区时的反射率偏高,根据等效介质理论,亚波长光栅在远离共振区可以被看为均匀的薄膜,本文通过对导模共振光栅进行单层、双层以及三层抗反射设计,有效的降低了导模共振光栅的旁带反射率,从而在可见光波段获得了性能优良的共振滤波 关键词： 导模共振 平面波导 傅里叶模式理论 窄带滤波     

热舟蒸发LaF3薄膜的紫外性能研究

研究了沉积温度对热舟蒸发氟化镧薄膜结构和光学性能的影响,沉积温度从200℃上升到350℃,间隔为50℃.采用分光光度计测量了样品的透射率和反射率光谱曲线,并在此基础上进行了光学损耗、光学常数以及带隙和截止波长的计算.采用表面轮廓仪进行了表面形貌和表面粗糙度的标定,采用X射线衍射(XRD)方法测量了不同沉积温度下样品的微结构.发现在短波长波段,随着沉积温度的升高,光学损耗增加,晶粒尺寸增大,表面粗糙度略有增加.不过散射损耗在光学损耗中所占比例均很小,光学损耗的增加主要由吸收损耗引起.随着沉积温度的升高,折射 关键词： 光学薄膜 沉积温度 3')" href="#">LaF₃ 光学损耗     

纤锌矿结构Zn1-xMgxO电子结构及吸收光谱的第一性原理研究

采用第一性原理计算方法,计算了纤锌矿结构Zn_1-xMg_xO(x=0,00625,0125,025)的电子结构及吸收光谱. 计算结果表明,Mg的掺入使ZnO的电子结构发生了较大的改变,与Mg邻近的O原子得到电子的数目明显增大,进而O原子返回部分电子给邻近Zn原子. Zn-O间相互作用减弱,禁带宽度变大,这也从同一合金中Zn4s上移的程度得到证实. 其吸收光谱也随着Mg的掺入出现蓝移现象,其吸收边对应波长分别为379, 关键词： 第一性原理计算 电子结构 吸收光谱 纤锌矿结构ZnO     

Nd:YAG激光器光栅式扫描预处理的计算模拟与优化分析

 采用计算模拟的方法,研究了光栅式扫描预处理的扫描方式以及脉冲能量波动、定位误差对预处理效率的影响。研究发现,脉冲能量波动及其定位误差使预处理效率降低,同时其影响与扫描方式之间存在相互调制作用,因此可以通过选择合适的扫描方式以及扫描间隔来优化预处理流程,提高预处理效率。此外发现,光斑呈等边三角形排列时的预处理效率优于正方形。