合金中痕量元素标准物质研制进展

通过对国内外高温合金、铝合金痕量元素标准物质的比较,评述了我国合金中痕量元素标准物质在种类、量值水平及不确定度等方面的进展。     

肺部超声B线数目与血管外肺水的相关性分析

目的探讨肺部超声监测B线数目在老年脓毒症患者液体复苏过程中评估血管外肺水的价值。方法在老年脓毒症患者液体复苏过程中应用肺部超声动态监测患者双侧胸骨旁、锁骨中线、腋前线及腋中线B线数目,同时应用脉波指示剂连续心排血量法（pulseindicatorcontinuouscardiacoutput,PiCCO）监测血管外肺水指数（extravascularlungwaterindex,EVLWI）对比,对B线数目与EVLWI进行Pearson相关性分析。结果共纳入28例患者,采集95组数据,B线数目和EVLWI呈正相关（r=0.92,P＜0.01）,同时发现B线数目与肺血管通透性指数（pulmonaryvascularpenetrationindex,PVPI）呈正相关（r=0.80,P＜0.01）。结论B线数目与EVLWI相关性良好,在老年脓毒症液体复苏过程中应用无创肺部超声可实时、动态地进行肺水监测,以早期发现肺水肿。     

A small sample-size automated adiabatic calorimeter from 70 to 580 K——Molar heat capacities of α-Al_2O_3

An automatic adiabatic calorimeter for measuring heat capacities in the temperature range 70—580 K, equipped with a small sample cell of 7.4 cm~3 in the internal volume has been developed. In order to obtain a good adiabatic condition of the calorimeter at high temperature, the calorimeter was surrounded in sequence by two adiabatic shields, three radiation shields and an auxiliary temperature-controlled sheath. The main body of the cell made of copper and the lid made of brass are silver-soldered and the cell is sealed with a copper screw cap. A sealing gasket made of Pb-Sn alloy is put between the cap and the lid to ensure a high vacuum sealing of the cell in the whole experimental temperature range. All the leads are insulated and fixed with W30-11 varnish, thus a good electric insulation is obtained at high temperature. All the experimental data, including those for energy and temperature are collected and processed automatically with a personal computer using a predetermined program. To verify the     

Effect of fused silica subsurface defect site density on light intensification

The effect of defect density on the modulation of incident laser waves is investigated. First, based on the actual defect distribution in the subsurface of fused silica, a three-dimensional (3D) grid model of defect sites is constructed. The 3D finite-difference time-domain method is developed to solve the Maxwell equations. Then the electrical field intensity in the vicinity of the defect sites in the subsurface of fused silica is numerically calculated. The relationships between the maximal electrical field intensity in fused silica and the geometry of the defect sites are given. The simulated results reveal that the modulation becomes more remarkable with an increase of the defect density. In addition, the effect of the distribution mode of defects on modulation is discussed. Meanwhile, the underlying physical mechanism is analyzed in detail.     

Hydrothermal Synthesis and Characterization of Ce_(1-x)Mn_xO_(2-δ) Solid Solutions

Nanocrystals of Ce1-xMnxO2-δ(x=0.00,0.05,0.10,0.15,and 0.20) were synthesized by a hydrothermal reaction route.The solid solutions crystallized in a cubic fluorite structure with a particle size in the range of 11～15 nm.The incorporation of Mn ions in CeO2 resulted in a lattice volume reduction.Mn ions showed a mixed valence state of +2,+3 and +4 in CeO2 lattice.An obvious red-shift of the absorption threshold edge was observed from the UV-visible spectrum.Compared with the bulk CeO2,Ce1-xMnxO2-δ nanocrystals exhibited a lower releasing oxygen temperature as indicated by TPR technique.     

超二代微光像增强器多碱光电阴极膜厚测量研究

介绍了多碱光电阴极的光学性能和光谱反射率特性,测量了多碱阴极的光谱反射率曲线.该曲线与普通光学膜层光谱反射率曲线相比,形状较不规则,原因是多碱阴极膜层存在光吸收.光谱反射率曲线上的干涉峰是入射光在玻璃与阴极膜层界面反射和在阴极膜层与真空的界面反射的两束光发生干涉的结果.根据干涉的原理,如果阴极膜层所反射的两束光的光程差为二分之一波长的偶倍数时,光谱反射将出现干涉加强峰;如果阴极膜层所反射的两束光的光程差为二分之一波长的奇倍数时,光谱反射将出现干涉减弱峰.根据超二代像增强器光谱反射干涉峰对应的波长,可以计算出其阴极膜层的厚度约为191 nm,比二代像增强器阴极膜层的厚度增加了38％.多碱阴极膜层厚度是影响多碱阴极灵敏度的一个关键参量,仅仅靠人眼观察阴极膜层颜色的方法不准确.实践证明,利用光谱反射的方法来计算阴极膜层厚度的方法简单有效.如果在多碱阴极的制作过程中进行光谱反射率的监控,那么将可以精确控制阴极膜层的厚度,对多碱阴极的研究将会更加深入,多碱阴极的灵敏度也将会得到进一步的提升.     

熔石英后表面坑点型划痕对光场调制的近场模拟

建立了坑点型划痕的旋转抛物面模型, 用三维时域有限差分方法研究了熔石英后表面坑点型划痕随深度、 宽度、 间距以及酸蚀量变化对波长λ =355 nm入射激光的调制.研究表明, 这类划痕调制最强区位于相邻两坑点的连接区, 且越靠近表面调制越强.当其宽深比为2.0---3.5、 坑点间距约为坑点宽度的1/2时, 可获得最大光场调制, 最大光强增强因子(LIEF)为11.53; 当坑点间距大于坑点宽度时, 其调制大为减弱, 相当于单坑的场调制.对宽为60δ (δ =λ/12), 深和间距均为30δ的坑点型划痕进行刻蚀模拟, 刻蚀过程中最大LIEF为11.0, 当间距小于300 nm时, 相邻坑点由于衍射形成场贯通.     

横向划痕对光场调制的近场模拟

熔石英亚表面划痕对入射激光的近场调制是导致光学元件低阈值损伤的主要因素之一. 用三维时域有限差分方法研究了连续横向划痕的近场分布, 对比了尖锐截面与光滑截面场调制的差异, 着重探讨了光场调制与划痕宽深比R的关系. 研究表明: 酸蚀后的光滑截面有助于减弱近场调制, 这类划痕的R>10.0时调制较弱且相互接近, R<5.0时调制显著增强. 当R取1---3时, 亚表面的调制达最大值, 最大电场幅值为入射波幅值的4.3倍. 当R取1.0---3.5时, 缺陷附近有80%以上取样点的最大电场幅值超过入射波幅值的2倍. 随着深度的增大, 强场区具有明显的"趋肤效应": 位于划痕正下方的强场区首先往左右两侧移动, 然后移向抛物口界面以及水平界面, 同时衍生出的多条增强线诱导整个亚表面层的光场增强.     

柏木油中倍半萜烃的乙酰化反应

70%高氯酸可作为柏木油中倍半萜烃进行乙酰化反应的第二催化剂组分,用以代替部分PPA。反应在常温下进行,乙酰化产物的产率和质量与原方法相当。该方法不仅节省PPA而且也减少乙酸酐的消耗,降低原料成本20%左右。